HOW TO JIMNY [Fix brake shudder and replace front brakes]

Рет қаралды 9,111

Күн бұрын

Step by step guide on how to diagnose and repair brake shudder by machining your rotors or replacing your front rotors and pads

Пікірлер: 13

@PJ-vs8dy 2 ай бұрын

Great video, I've had mine off before to do the kingpins but wanted a reminder before doing the brakes this time, few nice tips like I didn't know about greasing the pins before, cheers

@theworth123 Жыл бұрын

Brilliant job in making these vids short with concise and relevant info.. Well done mate from a cousin Brit, just please don't do so well in the ASHES... Lol...

@jakeywright123 2 жыл бұрын

Great videos man keep it up. Any chance of a walk around video showcasing all the mods that you've put on your beast of a jimny?

@jimnythings2410 2 жыл бұрын

Hey mate I’ve got a few more mods to do on it and I’m going to do a walk through 😁

@tylorpatton509 9 ай бұрын

ive got 30" tires on my 2013 zook and original disks and calipers. she doesnt pull up well at all! ive had a few close calls. so im thinking of swapping my disks and possible calipers out for vitara ones as there a bit bigger. i havnt checked out my breaks properly yet as i havent removed my wheels. but im just wondering if youve go the stock breaks on your zook, or have you swapped them out for bigger ones as youve got 31" tires. thanks mate!

@GERfusion 2 жыл бұрын

Great video 👍🏻. What do you know about death wobble? My Jimny has been heavily modded everything upgraded (Brought the vehicle already modified) I’m getting a severe case of death wobble between 30mph and 45mph, it’s unbearable 😫. Doesn’t seem to be any play in the kingpins and i’ve replaced the Panhard bushes with uprated ones. Still the same! It looks like there may be a bit of play in my steering box but not sure if that would cause it 🤔. Have you ever had this issue in your Jimny if so how did you fix it? Keep up the good work 💪🏻

@jimnythings2410 2 жыл бұрын

Hey mate usually there’s 3 things with Jimmy’s. King pins need shims, incorrect caster or the control arm bushes are fingered. I’ve never had a death wobble in mine but I put the jimny bits extended control arms in straight away. Maybe try the shim kit you can get for the king pins

@GERfusion 2 жыл бұрын

@@jimnythings2410 okay mate cheers

@johndt5444 3 ай бұрын

changed all the bushings!! 2007 soft top jimny. Before I had Super super bad wobble at 70-75km/h. So bad I thought I was very dangerous.. Initially I thought it was king pins or bearings but no. it was the bushing.. I also have I lifted it up(+4) with ARB springs and EMU shock. It rides very nice now. (EMU feel a bit too soft but nice)..bTW make sure you get polyurethane bushings )

@woodlandbiker Жыл бұрын

You can do a 100 if you want. In a jimny.

@billstewart3980 2 жыл бұрын

So you didn't show if the shudder was gone???

@jimnythings2410 2 жыл бұрын

Watch the last 2 minutes of the video. Filming the steering wheel while I’m bedding in the brakes. No shudder 👍

@billstewart3980 2 жыл бұрын

@@jimnythings2410 I watched the whole video, wasn't sure if it would shudder with harder or more abrupt breaking than you were doing at that point. It's all good, thanks for the useful info.