How to keep water out of your Metal Building?

How to keep water out of your Metal Building? | WolfSteel Buildings

Рет қаралды 20,166

Жыл бұрын

WSE00922
Pack, Watch as Adbeel explains how to solve common issues with water seeping into your metal building due to foundation.
WolfSteel building does concrete foundations to our concrete specifications with notch edge detailing to avoid water from seeping into your metal building. Check out our other videos to see that notch edge in action!
Website:
wolfsteelbuildings.com/
Facebook:
/ wolfsteelbuildings
Instagram:
/ wolfsteelbuildings
Tik Tok:
/ wolfsteelbuildings
Email:
quotes@wolfsteelbuildings.com
Chapters:
0:00 Water seeping into Metal Building

Пікірлер: 18

@andrewpinson1268 Жыл бұрын

Landed on this video and thought that this is the same problem I have, but you did not show any item I could use against those walls to keep water out permanently. I am closing in a car porch that will be inside the concrete and looking for a way to keep the water out.

@wolfsteelbuildings Жыл бұрын

Hello Andrew! There are other solutions that can be done to assist you with your situation! If you would like to reach out to me at adbeel@wolfsteelbuildings.com and send me pictures of your situation, I can guide you with ideas?

@tomw6315 Ай бұрын

How about leaks from windows? What flashing techniques to use to keep water out of red steel weld up with metal siding and shop windows? Seems like a good video...

@wolfsteelbuildings Ай бұрын

We will soon release a black and white building with 6/12 pitch. We will be speaking about how we flash our windows :)

@toychronicles5744 6 ай бұрын

What kind of sealer or caulk did you use? Any recommendation helps! Thanks!

@wolfsteelbuildings 6 ай бұрын

We used polyurethane self leveling and it worked great! It is made for concrete. There are other solutions as well depending your situation

@Condor1970 Ай бұрын

Can you install a foam sill plate seal when first building it? Also, wouldn't ridge vents be a good idea for a metal building, considering how much they sweat?

@wolfsteelbuildings Ай бұрын

Yes, it can be done however it is not common. What we use when ordered is sponge like material we call m-seal similar to that foam along with beads of polyurethane sealant and it gets compressed when the base rail (bottom plate) gets anchored. Metal buildings in general are not air sealed so they still breathe to minimize sweating. We still do highly recommend vents on the gables and ridge vents.

@wolfsteelbuildings Ай бұрын

Here is a video where we further explain this: kzfaq.info/get/bejne/a7tkgbac0cfNXY0.htmlsi=usercqsbUiZ4zxvc

@bigjr9004 8 ай бұрын

Mines is wood on concrete. When there's heavy rain with easterly winds my eastern wall allows water ingress to form interior puddles. My solution will be to make a concrete barrier, using wood battens as the border for the barrier, then remove the battens. I have got by with sandbags for the last 18 months but they are saturated now. It's a rare occurrence but still niggles me!

@wolfsteelbuildings 8 ай бұрын

Based on your description, seems like your creating a stem wall/retaining wall correct?

@bigjr9004 8 ай бұрын

Yes, small - 3 inches tall, 2 inches deep and about 5m long. @@wolfsteelbuildings

@imfromthegovandimheretohelp 5 ай бұрын

What's best for vapor barrier to the metal frame rail?

@wolfsteelbuildings 4 ай бұрын

What is the concern?

@Z-Ack 11 ай бұрын

Youall built the building on the slab. Should have predicted it better and sat the exterior panels/ framing on some rubber bitumen roll then would be 100% water tight and wouldnt have to spend the time and money caulking around the entire edge..

@wolfsteelbuildings 11 ай бұрын

Thanks for the insight Z-Ack.. Due to frequent experiences like this one we now install a M Seal under the base rail, apply thresholds on the doors, etc.