How to laminate wood with epoxy for wooden boat building

No video

How to laminate wood with epoxy for wooden boat building - (Part 2 of 2)

Рет қаралды 118,110

Күн бұрын

In Part 2, Master Shipwright Louis Sauzedde demonstrates his method for installing laminated frames during the restoration of his own 1948 Johan Anker 8-meter. In Part 1, Sauzedde cut the laminates and applied the glue, now watch as he installs the frame in place with the glue still wet, and uses screws to clamp the laminates together.
Watch Part 1 - • How to laminate wood w...
www.tipsfromash...
/ tipsfromashipwright
/ louissauzedde
Produced by Fish Hawk Films - www.fishhawkfil...

Пікірлер: 52

@philrulon 3 жыл бұрын

Love the widow-maker saw blade on the hand grinder.

@arisskarpetis 6 ай бұрын

I hear you. I ended up here from a search about laminating wood with epoxy and I am now somewhat traumatised after seeing that grinder. Yikes! He's such a good builder though.

@Daniel-nm6px 2 ай бұрын

Can't Tell you how wonderful it is to watch you do your masterful Craftsman Ship. And all the other Crew.

@mmanut 9 жыл бұрын

I enjoy these wooden boat repair videos. This is such a lost art, not many guys know how to repair a wooden boat the correct way. I could watch this stuff all day. Thanks for sharing.

@larrydobson6986 9 жыл бұрын

I really the info you provide, I have been a carpenter for 50+ years. You are one very skilled craftsman, I wish I lived in your area, I would work for free to learn from a master like you!. Thanks Larry

@karlnelson6593 7 жыл бұрын

Jeez... like getting a high level graduate class for free. Awesome display of knowledge!

@JenkinsBoatWorks 4 жыл бұрын

Fantastic! Learn something every time I watch Lou

@pparado 8 жыл бұрын

Excellent craftsmanship. So much attention to detail. No shortcuts. When he gets it done, you can be sure it's done right.

@johnferguson7235 7 жыл бұрын

This is an excellent application of lamination. Great tips and tricks, thanks for the posting.

@guyvangenechten6484 5 ай бұрын

Very very Nice job as always!!!👌👍💯

@tomthompson7400 4 жыл бұрын

total craftsmanship , a joy to watch.

@GILLEBRATH 9 жыл бұрын

That work is quite the art with all its calculations and procedure but comes together beautifully , that cut off saw belongs only in the hands of Louis, nicely done and enjoyed this as usual. Thanks for sharing.

@life_raft_fam8636 6 жыл бұрын

You Sir are a genius. A master of your trade. My hat is off to you. I also watched part 1

@captnemo8069 2 жыл бұрын

Mr Sauzedde, I'm a 68 yr old shipwright in NJ, with all that open space inside couldn't you have put in a solid piece of steam bent wood, measure first then pre-bend over a form. I avoid laminating a rib whenever possible, but when I must, I use resorcinol glue. White oak is slightly acidic which will cause the epoxy to fail, it will delaminate. Also, resorcinol is better in a wet enviroment, epoxy with wood is not, the wood swells slightly, the epoxy doesn't. I like your trick of tightening up the laminate.

@shanebeaudrot777 5 жыл бұрын

I don't know what they pay you for boat repair, but it's not enough! This guys structural wood working knowledge is at master level. I can't quit watching these videos. I want to build something.

@RhythmicEye 4 жыл бұрын

Thanks for sharing your knowledge, extraordinary craftsmanship and skill in a no fuss, straight to the meat of the nut, video.

@clintsteel446 9 жыл бұрын

this shipwright knows his stuf!

@Justinofalltrades1 8 жыл бұрын

this guy is obviously a master so dont get me wrong but man than saw blade on the angle grinder! omg that gave me the chills!

@Ilsabug1 8 жыл бұрын

+ironlionkalo I was thinking the same thing. But sometimes you do what you have to do.

@southjerseysound7340 8 жыл бұрын

I've done it although for me its the absolute last resort whereas he's pretty comfortable with it.But really when doing wood repair work and you need a decent cut on a heavy chunk of timber like oak in a tight spot there's not too many options.

@ot0m0t0 7 жыл бұрын

He mentions it somewhere in other video as a super dangerous invention of hes. Even he is not comfortable with it and does not recomend it :)

@stoffes 7 жыл бұрын

yea he said it in a video dont do it like him . i guess u need some time with it to master it,,,

@typicallucas4164 6 жыл бұрын

He calls it a suicide saw in other vids

@nelloagostini4389 2 жыл бұрын

WAs that a circular saw blade on an angle grinder ? You sir are my hero

@DailyDrives 9 жыл бұрын

I do love that death saw, glad it made an appearance again.

@adammcmillen977 8 жыл бұрын

Yeah, was that a circular saw blade on an angle grinder? What a badass!

@ro_yo_mi 7 жыл бұрын

Instructional video on the proper way shipwrights make barnacles.

@kendo582 4 жыл бұрын

holy cow what a job and what an expertise...amazing where the other parts of this video?

@mr.morgan5643 3 жыл бұрын

Amazing work!!! Thanks for sharing!!

@johnburgoon8711 3 жыл бұрын

Just fabulous. Thank you so much.

@Multiverse27 9 жыл бұрын

great work. very interesting.

@TheMrKrause 9 жыл бұрын

Nice job. Thank you for sharing.

@shanegillespie6014 8 жыл бұрын

The angle grinder with the saw blade has generated some comments and concerns, but notice he still has all his fingers... at the moment. : ) An I thought I was radical putting a 12"miter saw blade on my weed whipper brush cutter. LOL

@johnferguson7235 7 жыл бұрын

If the regulator here in California (CALOSHA) caught you using that tool, the fine would be very large. Using modified tools like that can also violate your liability insurance.

@travisjicorcoran5870 6 жыл бұрын

John Ferguson death to bureaucrats 🔥

@uberDoward 9 жыл бұрын

Louis, when you laid down the varnish, do you let it completely dry before putting the laminated frame in? I assume so, but wanted to ask. Amazing work, and exquisite craftsmanship!

@adammcmillen977 8 жыл бұрын

Love the videos! love that saw! any safety tips on using that set up?

@UnashamedlyHentai 9 жыл бұрын

Much better with the audio this time around. The music over his voice in the last vid was difficult.

@vaidotasratkus7619 11 ай бұрын

can you use laminate for planking?

@Damian-Church-NZ 2 жыл бұрын

Does anyone know what epoxy I use for this? I have to replace some ribs and will use this method.

@victoryfirst2878 Жыл бұрын

Why the hell did the original woodwright's use bronze fasteners instead of steel ???

@Str4ng3F0lk 5 жыл бұрын

The cost of all this must be crazy.

@dionmorrow5271 4 жыл бұрын

not sure it you are still working but if so where are you located i would love to meet you and watch a master at work

@scottdowney4318 2 жыл бұрын

I hate how they use steel bolts or screws in wood boats. Dealing now with the after effects of how Egg Harbor spiked all the floors into the keel on my 1970 37 footer. Had 2 floors rot out in forward hull which is the lowest part of the hull and collects all the water. Not only rust but also iron sickness, wood splitting, then rotting. The steel spike was completely dissolved halfway down in the floor. And a couple other floors have rust puddles where floor meets keel. Keel though is still solid. And if you have a 1 3/4" wide floor and drill for a 1/2" spike all the way through the floor to pin it to the keel, your also cutting the strength of the floor lumber a lot, turns it into a 1 1/4" thick piece of wood instead. I think they did that simply as their method of putting the boat together as I dont think these spikes are doing anything useful after the boat is constructed.

@scottdowney4318 2 жыл бұрын

The way I repaired those 2 rotted floors, was cut off everything on the floor from 4 inches and lower, using a jig saw, leaving the upper unrotten part of the floor in place. Then cleaned out the rotted hole where spike was and glue in a small piece of wood to infill that area. Cut smaller pieces of PT SYP (ground contact wood), match to fit the frames (ribs) angle and glue them to the left over floor timber in sections, like 3 thinner pieces (total about 5 inches worth in height of PT SYP wood, to fit between keel and remaining floor timber. I then cut some red oak, (since I have tons of oak fencing boards) to like 37" long, by 5" tall by 1" thick and glue and screw to each side of the top original part of the floor timber using SS deck screws and PL glue mixed with sawdust. That way it fixes the strength issue of the worn and rotted old oak floors. I leave out the steel spike into the keel. The rot turned the wood to black soft mud, bad enough I could push a screw driver through the oak. But surprisingly the keel was still ok, including the spike hole which I glued in a dowel to plug it up. Back in 2005, I had reframed much of the boat with PTSYP, and it is still looking like new. In my boat, the floors sit on top of the frames.

@paulbriggs3072 Жыл бұрын

@@scottdowney4318 Impressive sounding. I think southern yellow pine (pressure treated) is an excellent frame material if it is chosen for grain density. I have even ripped it into strips and made laminated knees from it by first pouring boiling water over them to bend into a form, then when dry, epoxy laminating them using the same form.