How to Livestream Events - An Audio Intensive

Рет қаралды 18,394

Күн бұрын

Knowing how to properly set up your multi-channel audio for a livestream is essential to hosting an engaging online event. You can learn the requisite skills, practices, and equipment audio engineers need to deliver clear sound to their online viewers in this audio-focused webinar.
This webinar was held on Dec. 15th, 2020
0:00:00 Introduction
0:03:18 Internet
0:05:06 Computer Specs
0:06:27 Live Streaming vs FOH Mix
0:08:23 System Overview
0:10:43 Audio Equipment
0:18:07 Basic Streaming Tips
0:25:26 Streaming Engineers' Top Tips
0:34:34 Q&A
You can see more Q&As from the following link.
download.yamaha.com/files/tcm...
Please also check the following documents for your reference.
download.yamaha.com/files/tcm...
download.yamaha.com/files/tcm...
#Yamaha #YamahaProAudio #YamahaAudioversity

Пікірлер: 14

@hildemora 3 жыл бұрын

This is gold.

@boris-ue2zp 3 жыл бұрын

n12 yamaha drivers for big sur please, canallas

@hbmike47 2 жыл бұрын

can you use remote software via Ipad to adjust monitor mixes or aux mixes at the same time as an engineer is using the main console for FOH on the TF series? Great advice. Thanks for the video.

@kastleenterprises5151 2 жыл бұрын

Yes. TF StageMix and MonitorMix apps

@YeshuaMuzic 4 ай бұрын

Was looking for this answer as well. Thanks

@moses1255 3 жыл бұрын

Hi, how to take out from TF3 to my computer for live streaming on KZfaq with my band for church service ??? Pls help us

@andywadsworth94 3 жыл бұрын

We are using TF3 with a Magewell Ultra Stream box. The advantage is you don't need a computer at all as the Ultra Stream connects to KZfaq and you can use the app on your phone to control it. As for TF3 out, I'm currently including stereo L/R feeding into the video mixer that sends HDMI audio and video to the Ultra Stream. The issue I have is although I have my aux 9/10 set with a different fader set than my house mix, I haven't figured out how to get the output of my aux 9/10 to go tot he live stream. I have XLR R/L plugged into my Omni out 9/10 ports and they go to my livestream but the audio I'm getting is still the house mix. So, I'm missing something... but the Magewell Ultra Stream made the streaming part really simple. I went from no clue to wow, we're live in about 20 minutes.

@andywadsworth94 3 жыл бұрын

If you're going to use a computer, hopefully you have 3.5mm stereo input that you can use for audio-in. These are typical on desktops but uncommon on laptops as laptops typically have a mono input for a headset microphone. Avoid that if you can as just being able to pan your band left/right will sound much better. If you have a stereo input jack on the computer, you can purchase a Dual XLR female to 3.5mm stereo microphone cable (I found one on Amazon by Tisino for $17). Connect this on your TF3 Omni Out as Stereo L/R and plug the 3.5mm into you stereo input on you PC and you're on your way. If you have multiple video inputs, you probably have a video switcher. If the video switcher output is connected to our PC via HDMI, then you can connect the 3.5mm stereo plug from the Tisino cable I mentioned above to you video mixer. Then, the video mixer can send the audio to the PC over the HDMI along with the video. Hope this helps.