Ask This Old House general contractor Tom Silva gives tips on installing cabinet hardware accurately and consistently.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Skill Level: Beginner
Shopping List:
Two-faced putty
Adjustable jigs
Steps:
1. On base cabinets with drawers, keep pulls on lower drawers slightly higher than center. They’ll appear centered when viewed from above.
2. To visually check the location of a knob without making holes, use two-faced putty.
3. Use a combination square to measure the center location and transfer that measurement to other cabinets.
4. Use scrap wood to create a jig to ensure consistent placement of hardware.
5. A basic plastic jig can be used for marking with several offsets located.
6. An adjustable jig can ensure consistent placement and acts as a drill guide.
7. Another adjustable jig offers spacing for both pulls and knobs on door and drawer front cabinets.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers-and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
bit.ly/AskTOHTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldHouseWebsite
How to Locate Cabinet Knobs and Pulls | Ask This Old House
/ thisoldhouse