No video
HOW TO LS SWAP A JET BOAT PART-1
Рет қаралды 10,110
Күн бұрынWe decided to ls swap our jet boat and take it to the lake this past weekend the engine mounts where already in and headers were finished but we yanked the built engine for a junkyard 5.3 that was complete.
Headers were built by Danny Giannini @dgiannini www.instagram....
Valve Covers Part #241-408
Fuel Pump Part# 12-800
Fuel Filter PART# 162-550
Fuel Regulator Part# 12-848
we highly
recommend running a Terminator EFI control system and make sure you chose the correct one depending on engine
CP performance PTO driveshaft
ICT billet water pump Relocation lines SKU 551536
This video was brought to you by @HolleyPerformance!
They make everything you need for your swaps!
DAY 2 coming up!
@freethinkingamerican80 3 жыл бұрын
That paint job is amazing!
@DIRTCINEMA 3 жыл бұрын
Thanks! it took forever but was worth it!
@texasdriven1521 2 жыл бұрын
Great looking boat! Love that exhaust as well! We hope to LS swap a jet boat but so far we are enjoying the 460 and 454 big blocks!
@Allthewayfromtherez 2 жыл бұрын
Bad assss. I'd love to build one.
@renaissanceman7145 3 жыл бұрын
I agree with Ryan Nolan, that paint job is awesome! Also, the 8 into 1 header looks sick as hell! I've been bitten by the boat bug recently, want to get something to go fast. I'm torn between fiberglass for the lake or an aluminum jet boat for the river. Aluminum is a lot more money, can take more punishment and perhaps more fun but fiberglass is much cheaper, smoother and faster. I'd do both if I could afford it but it'll have to be one or the other. What do you think?
@DIRTCINEMA 2 жыл бұрын
Get a fiberglass one for cheap and see how you like it! You can always sell it for more if you put some work into it
@renaissanceman7145 2 жыл бұрын
@@DIRTCINEMA I appreciate your reply and opinion. I was/am of the opinion that fiberglass is the way to go as well. Definitely more of them out there making it more likely I'll find one that fits my taste and idea of what the "ideal" (speed) boat looks like/is configured. There are plenty of possibilities on Facebook Marketplace near me. (I just REALLY need to finish a couple other projects first before I start another. Does that sound familiar to anyone?)
@garryhern2908 6 ай бұрын
Have you not used Exi Outs.
@lorenenns2617 Жыл бұрын
Awesome build! What impeller size are you turning in the jet pump?
@Posi12Bolt 2 жыл бұрын
New sub here... please tell me theres a video of that awesome paintjob somewhere
@kennethbotkin5779 3 жыл бұрын
Just a quick thought. Wouldn’t you want to run your fuel system (pump-fuel rail-pressure regulator- then return it) to make sure rail has constant pressure at all of the injectors instead of dead heading it?
@DIRTCINEMA 3 жыл бұрын
We ran the system the first the old fuel pump was bad. We uncapped the fuel rail to make sure it was getting fuel I know it's not the best way but it worked lol
@kennethbotkin5779 3 жыл бұрын
Right on, hopefully see you out on the water sometime! Couldn’t miss those headers if tried
@Allthewayfromtherez 2 жыл бұрын
My ls1 has a returnless fuel setup (not ideal) and I mad 398whp on stock injectors.
@1525kings 2 жыл бұрын
Where did you get those headers?
@DIRTCINEMA 2 жыл бұрын
These were custom built by Danny Giannini @dgiannini on Instagram
@micahcarey3042 2 жыл бұрын
What kind of oil pan is that?
@dannywiley4072 2 жыл бұрын
Is the exhaust using o2 sensors?
@DIRTCINEMA 2 жыл бұрын
Yes
MotorTrend Channel
Рет қаралды 6 МЛН
Prestige Motorsports Inc.
Рет қаралды 25 М.
Powerboat 1
Рет қаралды 17 М.