A tip for those that don't have an oil needle applicator: use a wood toothpick, dipping it into the oil will cause a little drop to stick onto the tip, the drop will come off when you press the toothpick on wherever you want the oil to be. Use the same toothpick repeatedly, the oil saturates the wood and makes the oil stick onto it easier (plastic doesn't work good, oil falls off too quickly).

That blade centering tip just solved a constant frustration on a couple of my knives

Lucas is the most genuine person. How you see him on this video is how he is every time I talk to him. Super down to earth guy that designs and makes beautiful knives.

The fact hes talking into a mirror is funny, good one

Lucas is my favorite knife designer his pieces are amazing.

I totally agree with overtightening the pivot. I have done it myself and it is much easier to back off then to try and tighten it to where you want your knife to be.

Dedication indicated by the knife tatoo, i like it

Pro Tip: Foam swabs are bar none some of the most epic, amazing tools you can buy for maintaining any & all of your gear! Guns, knives; everything. Get large & small ones, and you can get into all the nooks & crannies without leaving lint / debris from paper towels, q-tips, etc. You can even swab inside the handle of a folding knife, ensure that area gets lubed & protected. Amazing little tools & so dirt cheap!

Honestly I refuse to disassemble my folders unless absolutely necessary. Tiny screws strip too easily, and I can never get it back to exactly three way I like it. Messed up an old (but good) Gerber, but I'll try your tips to see if it will help. Thanks again y'all.

When I reassemble a knife I always add oil, washer, then more oil. I found that this method is a lot better in aiding the braking in of a knife and smooths the flipability of the knife.

When I got my presale Cold Steel voyager XL PE Vaquero, everybody said "Oh its not " drop shutty" ...it was all I heard "Triad sux" etc. So I shoved the pivot full of Lucas Red N Tacky #2, worked it until it felt better. Washed the grease out completely with WD40. Got all that out and then finally lubed it with SEAFOAM DEEP CREEP. On Christmas Eve 3 years ago that knife with a horrible action dropped shut slick as owl shizz on a glass door knob and hit my right index knuckle as I was closing it. I had to super glue my finger shut after pouring it full of alcohol. That knife is still right, still drops shut, still centered and its 3 feet away...looking at me funny😂😂

I got crazy lock stick on my Spyderco pm2, I’ll go ahead and try the grafite trick on it and see if it will work

My favourite puzzle I could do over and over again

If Nick Shabazz sees this, I'm pretty sure he will say "It needs more lube" 😂😂😂

I bought a Lucas Burney Böker plus Kihon stainless steel tanto two days ago and I am absolutely thrilled with the knife.⚔️👍 Thank you Lucas 🫡

So excited for the CRKT Tuna in 2020!

Nice centering trick. Never thought of that

Lucas Seems like a Fine Gentleman

One of my favorite designers, thank you BHQ!

I like when Ben and Zach are both in the video

Awesome vid, good advice, I will keep these tips in mind next time I clean my benchmades!

first auto knife i ever owned, my grandfather (a stereotypical "greaser") gave me a switchblade. it was a little stuck, so he actually dipped the knife in motor oil. seemed to work alright!

Very good tips and Info om how to maintain a folder. Thank You !

Wow it’s like: which one is zac and which one is Lucas?

Great tricks I've learned a lot. Thank you guys. You are my favourite twins 😁👍

Using compressed air can clear dust and debris. Also, If I’m taking a knife apart for the first time, I will take a few pictures to ensure I properly orient everything upon reassembly.

Zac did all the work while Lucas just sat there...

Another good vid . Hold cow though. How much content are you holding from Blade show and when will you make another great video with Ben. Or like the Houge video. I MISS THE PODCAST style videos you were doing.

I love Balistol!!!!

Cool! I really liked that you mentioned graphite.

Lots of good info. My preference is I like the knife to drop shut because I like to use a knife as a tool 😉

Hey Zak Does BladeHQ sell kits for knives cleaning and adjustments ?

Great video! Thanks. Simple but effective insights. 🙏🏼😀

Good tip for blade centering will use it on my knives

Great video - saved in my favorites. Awesome advice.

This is a good example of two guys who want to look like each other. Only their Moms can tell which one is which.

Very informative, thanks guys :)

You guys should cover the A.G.A. switchblade and lever locks. Think it would make an awesome video.

That's an beautiful knife that Lucas is demonstrating on. What is that?? I must have it!

That 3 small tiny drops of oil is an excellent tip.

All I gotta to is keep my joints oiled and edges keen, and my blades rust free. Maybe occasionally clean lint out of the blade channels, but that's about it. Don't gotta worry about anything else with my traditional folders.

You guys should do a how to on cleaning balisongs

I use a toothbrush for cleaning out the small hidden pockets on my knives. Any old toothbrush works, but a child's brush or pet toothbrush works best (slightly smaller, though you can trim any toothbrush to any size).

That was a very good one.

Twins are back😂😂

Pleas can you do a review on helle knives

Dude!!! Totally!!!

Where can I purchase the driver tools?

Very cool, thanks!

2:50 whats the name of that driver your using for your bit?

What's that knife!? Looks nice!

very useful! thanks

Very cool great tips 👊✌

Great video.

what is that nice metal driver @3:10 - dont see it on amazon

I usually use LSA oil on my knives. same thing i use for my guns

Regarding pivot adjustment, do you recommend Loctite to hold the pivot screw in the half turned loose position? My problem is that I have a Quietcarry Waypoint and I thought the blade was a little stiff. I relubricated the pivot but realized all I needed to do was just loosen the screw slightly. One strip down video suggested to use Loctite. I only used light machine oil but I’ve ordered KPL which is coming next week.

I put vaseline on my bugout and works very well, is there a problem?

I just spray ballistol on my knife and it works great.

Thanks Guy's for their info.!!! :-)

When using a pencil the lead should be a high number it has the highest grade like 6 or above . The lower numbers have more clay and you would be applying an abrasive the best is a pure graphite powder ... by the way what is the brand of the screwdriver that Lucas is using

perfection

I carry a Benchmade grizzly ridge I work on a potato farm and have a lot of trouble keeping the action smooth all the dust any advice I don't want to have to oil it every week?

that is a nice driver set where can i get it

What knife is that? I love it

COOL

I was literally just thinking about how I should maintain my new Zero Tolerance Sinkevich flipper I bought in your store on Wednesday. I looked at my phone to unlock it, and POW! There was the notification for this video. I think we might have some sort of psychic connection goin' on here. Creepy. Thanks guys. BTW would "BATTLE BORN HP PRO lubrication and protectant" or "SLIP 2000 EWL" work for lubricating/protecting the blade steel, or does it have to be a special knife loob?

What knife does he have?

Can i use Silicome grease or Hair clippers blade oil? Thank you wonder video

AH! yall switched shirts... very tricky.... lol

What brand of bits and drivers do you guys recommend? I used the benchmade ones in the plastic folding case and I loved it, but I’ve had it for a good amount of years and it certainly shows. Plus I’m sure that there has to be a better set to use.

Anybody here who’s familiar with gun maintenance, I use CLP to keep my AR lubed up. Would that work for a knife, too?

Does anyone know what kind of screwdriver tool kit Lucas was using? I want one!

Can one use bike lube to lubricate a 20-30 dollar knife or no?

Do you only lube blade side of your washers?

I'd love to see a kit review Lucas's tool kit. Anyone know what torx driver Lucas is using?

Hey BladeHq im new to fishing and I was wondering if you could do a Fillet knives video?

Love my kwaiken

Where can I get that bag with the tools

What are some good knife tools? All the star hex bits I bought were cheap and broke and striped out extremely easily. Any suggestions?

is this a "Tuna" before CRKT started working with Lucas?

Hat kinda knife is that...I want that

Maybe not twins, but definitely cut fro the same piece of "Man-Cloth". Hahaha!

Thanks for the video-where do i get a good set of torx bits for the maintenance ?

Being a mass hole, I love that shirt Lucas!!!

Next time I see this video I fix, repair and Clean My Spyderco!!!😄😄😄

Informative video! Curious who makes the tool roll Lucas is using?

What kind of tool is that? Thanks in advanced!

What driver is that?

What was the model knife he was using for the demo?

Can i use wd-40?

what kind of bag is does he have here. whats all in it?? Id like to see a full knife care kit?? maybe a challenge vid??

Nothing About sharpening etc? That the hardest part for me

Is it 10 weight nano?

Whats the screw driver your using? Need one for fat fingers

What are the driver bits Lucas mentioned? I've murdered so many T6s!

I need to know the best way to sharpen a karambit. I own several. I did not consider sharpening until after the blade went dull. Any suggestions?

Last

Nice 👍🏻

Which model knife is this?