Making a laptop stand for my CNC machine using Amana Tool® CNC router bits. www.toolstoday...
How do you think this turned out? I used this on my Shapeoko 4 CNC but the plans will work with your setup.
The customizable and downloadable plans for this project are also available on our website item no. LAP-STAND
www.toolstoday...
Feed, Speed & CNC Running Parameters
Amana Tool 46176-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/8 D x 13/16 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
www.toolstoday...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Depth per pass: 0.25”
Amana Tool RC-45711 In-Tech Insert Carbide V Groove 90 Deg x 11/16 D x 21/64 CH x 1/4 Inch SHK Single Flute Router Bit
www.toolstoday...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Chip Load per Tooth: 0.002”
Amana Tool MR0112 Miniature 1/8 R Corner Rounding with 3/16 D Ball Bearing x 7/16 D x 3/8 CH x 1/4 Inch SHK Carbide Tipped Router Bit
www.toolstoday...
Amana Tool 47116 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit
www.toolstoday...
I then used the Fein AMM300 MultiMaster multi tool to trim the tabs and the Amana Tool #MR0112 3/16" ball bearing mini roundover bit to flush trim them and add a nice roundover to the knobs. The carriage bolts were installed and the knobs are ready to be used!
Links
** Subscribe - / toolstoday
Carbide 3D Shapeoko CNC Machine
www.toolstoday...
FEIN 71293261090 MultiMaster AMM300 Plus Start Set, Cordless Oscillating Multi-Tool
www.toolstoday...
** Shop the website - www.toolstoday...
** Like at Facebook - tinyurl.com/too...
** Follow on Instagram - / toolstoday
More Links
Amana Tool® www.amanatool.com