How To Make A CNC Spoilboard In 3 Sections

Рет қаралды 1,468

5 ай бұрын

In this video I make a custom three section spoilboard for my Ooznest Workbee Z1+ CNC which is made from a 4ft sheet of mdf but still covers the larger 1270 X 1270 working area of the machine. This setup allows me move the sections around depending on wear and tear and also allows me to remove the front section completely if needed.
Spoilboard Design Video: • How To Design A CNC Sp...
CNC Build Playlist: • How To Build An Ooznes...
‪@ooznest‬ Website: ooznest.co.uk/#a_aid=6230bffc...
Please note that this is an affiliate link so if you use this link for a purchase it will help my channel.
Software I use for the CNC: ‪@vectric‬ Website: www.vectric.com/products
If you are interested in any of the CAT Power Tools I use in my videos: aef.aws.aphix.software/cat/c-...
🤝 HELP SUPPORT THE CHANNEL 🤝
Support by Subscribing and hitting Like and Share on my videos
Support with KZfaq channel Super Thanks
Buy me a coffee, paypal.me/eireworkshop
Follow me on Instagram: / eireworkshop
Contact me: eireworkshop@gmail.com

Пікірлер: 50

@paulgreene421 5 ай бұрын

Good to see you back Tommy

5 ай бұрын

Thanks Paul 🙂

@samuelgardiner6504 5 ай бұрын

Thanks Tommy great video and awesome to have you back. Im not going to say I'll have a CNC because the last time i told you I'll never have a spindle molder I ended up being given a spindle molder to restore and I had to go back and rewatch your spindle molder video so I'm going to save this video just in case. Thanks Tommy. Cheers mate

5 ай бұрын

Thanks Samuel 🙂, you should never say never I wouldn't have thought a few years ago I'd have a cnc in the workshop and now here we are 🤣.

@thomasgabriel4531 5 ай бұрын

Your talents are endless Tommy, it's ideas like this make me wish I had a cnc. Keep up the good work

5 ай бұрын

Thanks Thomas 🙂

@therelaxingwoodshop7495 5 ай бұрын

What an awesome piece of kit. Looking forward to you pushing the boundaries of what it can do. Boldly go where no Irish man has CNCd before

5 ай бұрын

Thanks 🙂, did you get your workshop sorted out and back in action again?

@therelaxingwoodshop7495 5 ай бұрын

@ The builders are in and the concrete slab is coming up this week. Will have a video of the progress in a weeks time. Hopefully. Thanks and take care 😀👍

@therelaxingwoodshop7495 5 ай бұрын

@ Thanks for asking. The builders are starting this week to remove the concrete slab and then the garden and driveway. I plan on getting a video out a week today 👍😀.

@keggyification 5 ай бұрын

Clever modification to give yourself extra height Tommy, very simple but I bet many haven't thought to do the same. I'm suspecting your looking to introduce some sort of vertical ability to your CNC by being able to remove the front spoil board and access the hole I saw there. I'm really interested in what you do to make this CNC a 'Tommy special' so please keep them coming Sir.

5 ай бұрын

That's the beauty of a kit style cnc leaves to open to improvements and you are spot on the hole in the bench gave it away 🤣

@williammcbride4978 5 ай бұрын

Another very informative and well explained video Tommy you understand what you want and have the ability to create something that works well for your needs that's the sign of a true craftsman. Well done

5 ай бұрын

Thanks William 🙂 you are very kind

@denischadwick4558 5 ай бұрын

Excellent ideas Tommy you really are a fountain of knowledge of seeing an issue and coming up with very smart and effective solutions

5 ай бұрын

Thanks Denis 🙂

@waynebond6379 5 ай бұрын

Tommy ,you sir are a genius . Brilliant video as usual. Keep up the great work .thanks 4 sharing

5 ай бұрын

Thanks Wayne 🙂

@jameshall9541 Ай бұрын

Hey Tommy, Really Appreciated Your videos on Workbee. I have just finished surfacing your spoilboard and running the grid looking forward to my first real-world project today. Great Design. One thing to note in the video is that the two end clamps do not need to be T pieces. I machined mine up before realizing. Anyway, keep up the great videos, look forward to more CNC content

Ай бұрын

Thank you very much, I'm glad you found my videos helpful. Just a note the end pieces are not T pieces they only have one side machined but will still do the same job with both sides machined 🙂

@alainborgnet4282 5 ай бұрын

Many thanks for this very instructive video. I'm waiting impatiently the next one describing your process to make the toolpaths!

5 ай бұрын

Thank you 🙂 I'm working on it now will be posted over the weekend

@denisoriordan6739 5 ай бұрын

Some working out in that Tommy. You had the porridge, & a bit of salmon ate when yer man was handing out the brains that morning. 😂

5 ай бұрын

🤣🤣🤣 thanks Denis 🙂

@paulbrennan9193 5 ай бұрын

Absolutely brilliant Tommy 👏

5 ай бұрын

Thanks Paul 🙂

@graveurgraveur2691 5 ай бұрын

Very good idea, thanks for sharing.

5 ай бұрын

Thank you 🙂

@ooznest 5 ай бұрын

Thanks for the video Tommy and sharing your solutions!

5 ай бұрын

Thanks very much 🙂 the machine just makes my ideas so easy to implement and more to come 🙂

@Phenrica 5 ай бұрын

Really like the solution to giving more depth and the 3 section approach I’ll definitely consider this when I come to replace my spoiler board. Thanks for sharing . 👍

5 ай бұрын

Thank you 🙂.

@Phenrica 5 ай бұрын

@ Hi, I’ve got the maffel spindle like yourself, do you have any issues with cutter pull out? I’ve had it a few times now, it feels like I have to really tighten up the collet rather than just the 1/8th nip 🤷

5 ай бұрын

@@Phenrica hi, no I have not had any issues like that since changing over to the mafell. Can I ask are you sure the bits are the correct size for the collet as a 6mm bit will be too small for a 1/4" collet.

@Phenrica 5 ай бұрын

@ now that’s a good question Tommy, I do have a range of bits and collets (8mm, 6mm, 1/4, & 1/8) and I’ve got them sorted accordingly however I’ve never measured them just taken the manufacturer’s size as true 🤔. Having given them a measure I can confirm that they’re ok. Ooznest’s supplied 😉 it’s the 1/4 up cut and a Rutlands 1/4 compression bit that seem to misbehave, maybe I’ve just not been giving them a good nip 🤷‍♂️ Thanks for the reply Cheers Steve

@tetleyk 4 ай бұрын

After many months of thinking about getting a CNC machine, I'm both a computer programmer and maker so this intrigues me greatly, I'm just getting to the point of buying a Workbee Z1+ CNC and have been trawling through the InterWeb to find out more about it. Since I regularly use 8x4 sheets of marine ply I'm aiming to get the 1500 x 1500 version and was delighted to find your series on assembling the CNC and now the creation of a suitable spoilboard. Many thanks for doing this. I look forward to seeing what you do next with this great machine.

4 ай бұрын

Thanks very much, I'm delighted that you found the series helpful. Yes iv been getting mine specific to suit my needs and I think this spoilboard is perfect for the machine and using 8ft sheets. Don't forget if you decide to get a machine to use the link in description of the videos it helps me to continue to create videos 🙂

@tetleyk 4 ай бұрын

@ Done, but I don't know if it worked.

4 ай бұрын

@@tetleyk enjoy the build when your kit arrives 👍

@johnmurphy3854 5 ай бұрын

Great to have you back making video's Tommy and brilliant to get an insight of the improvements you are making to your machine, very well explained as always. John

5 ай бұрын

Thanks John 🙂 it's great to be back still trying to get back into the swing of things

@joesmale13 5 ай бұрын

Get that pendant set up mate, will take you less time then it did to jog to zero. 🤣

5 ай бұрын

Absolutely 🤣.

@jtabet010 5 ай бұрын

Very nice modular design , correct me if am wrong but when u switch sections u will have to resurface everything?

5 ай бұрын

Yes if sections are switched it would be best practice to run a surfacing pass just to be 100% sure its perfect

@danielnaden28 4 ай бұрын

Hi mate, great video. I've recently finished building my workbee, can I ask you, when you surfaced the spoil board, did you use the touch probe? Or did you just hit go on the programming?

4 ай бұрын

I used the probe to set the z height, I set the position of x and y to the centre of yhe spoilboard manually. Hope this helps

@danielnaden28 4 ай бұрын

@ thank you mate, huge help