Nice instructional video, shows the process in an easy to understand way. I have a similar burner using an old air compressor tank giving a ash draw, fire box and enclosed cooking area. A trick I used for the hinges was to cut the hinge line and part of the door and fit the hinges before fully cutting out the doors. This way the door remains in the hole and is all lined up before being released.

Came here for the camping. got caught up in the projects. Does anyone else find themselves looking away for the welding?

Very nice stove, excellent welding skills and the video is concise without superfluous nonsense.

Planning to make one of these myself, trying to use up the tiny bit of gas thats left in the bottle first and connected it to my bbq, so far its been going for about 3 hours.. never thought it would last that long lol!

Nice to see a fellow fabricator and woodsman lol! Great video

This is great Dan. Wonderful skills on display and a very useful and practical result. Thank you for sharing. Paul :)

built one myself. kick out lots of heat.great vid.

Brilliant idea Dan, nicely done

That's class! Nice one

Great - and some cracking equipment there too.😀

nice job. i want one like that for my garden

Great job dan. You're pretty handy with those cutters and welders.

Wow...excellent idea 💡. Tks for sharing. 👍 crack on 👍

That’s awesome 👏

that actually turned out really well. ..good welding skills mate, keep up the good work. ...

Good use of works time 😀

Awesome mate.

nice .great job atb

nice one, I got to try this

love it dan

Love it

It's a great idea, but I'm guessing most of us haven't got access to a workshop like that. Can you do another one that doesn't include plasma cutting and all the welding. Cracking job though mate, you could sell those!

Good effort ! I like it.

Great job I have one very similar, but I have a full flat surface welded on top to use for cooking at the big meets, great skills pal 👍🏻

That is nuts!

Nice. Great job brother.

Not bad, i like it!

That's awesome pal . you should start selling them .

Nice one dan, you are certainly handy with a welder.

Sat here turning away from the flash..... Experienced...

Brilliant 👍

good job mate i have been trying to get my self a small one of these for my canvas tent atb stuart

Now that's handy.

Well done 👍

yea we all have that gear good idea

Good video and stove. How did you make the grate?

All you need is a fully equipped workshop …Oh yes , easy .

very nice work on the stove.

That's great Dan. When is your stove on sale ? I understand that you need views but for me personally I can cook really well so I would much prefer to see you doing projects like this. You have got skills mate and your wedding and metal works skills far out way you burning slabs if meat 😜👍✋🏼.....great project , I want one

great job. next spray it with heat resistant exhaust paint to keep the rust at bay.

The doors on upside down. Details man. Otherwise nice job

be careful flo gas dosnt get you , i used a couple of beer kegs once and got a knock at the door lol blur or remove brand fist ;)

What disc are you using to take it back to steel ?

Thanks for the video and great job! Going to make one of these next week for myself. Is there anything you would have done differently if you made it again?

there were pen markings during the early stages for "tray", i guess this was for cleaning the ashes out. It didn't make it to the end, was it unneccesary? thanks

Do you need a special kind of angle grinder blade for taking the paint off at 3:32 ? Or do you just hold it at an angle?

im currently doing this for my shed, But cant get the frigging top connector bit off! haha

😎

Did you brake your knuckle when you punched it 😂😂😂

how did you remove the gas tap from the top?

Doors upside down fella. Good effort though

Not much ventilation I've got one sitting on another bottle which was cut in half I put proper slats in the bottom of the burner plenty of air & it's so easy to clear away ash

Nice vid, just one question though chap, why did you bend the the otherway instead of just welding the hinges straight to it? I'm sure there was a reason and I'm keen to know.

god i got weld flash just watching this

You need tou turn the wire speed down or turn your amps up

what happened the tray marked on it, and your door is upside down

I made it with woodprix handbooks !

Pretty sure most people don't have a plasma cutter at home. 😀

Welded the door on upside down hahaha

I'm looking to make a Chiminea out of a tank like this .

What size is your flue?

Hi Dan How do you clean the ash out

i am thinking about it mate

Wondering why you put the door inside out and what about ash

Hey mate. I have seen a few times now people grinding the paint off. Why not just burn it off? Thanks.

I think I’ve got arch eye from this video ☹️

why didnt you make it a king minion and use the bit you cut up as a crown and cover the holes at the same time

you welded the door on upside down, now the original seam doesn't line up

Im using woodprix instructions to make it and I do it already :)

Think I just got arc eye...

You can use woodprix instructions to build it yourself guys.

Oh I'll just pop out and buy myself a plasma cutter and mig welder then....I have MMA and a disc cutter.

cut, but the door is useless and the hole is too small to allow enough heat out to your body outside. great indoor idea with a proper flue thru the roof, but stupid stupid for outdoors, dump the door. Close the door and all your heat escapes up, yeah, duh

I did it with Woodglut.

Woodglut has very good and accurate plans.

do it yourself , go to woodprix page and learn how.

I did not see the usefulness of this project, what's the use?

I understand what you are doing but there's a shortage of bottle's now ,ya don't buy em u only buy the gas !can't buy gas now without an empty due to people cutting em up 🤔

Door is to high

Das Schweißgerät ist voll schlecht eingestellt!!!!

I found some amazing plans for Woodglut. Just check them out.

2 long

I'm a fabricator welder ,you had no gloves on ,no mask and no safety glasses on ,this should be called HOW NOT TO MAKE A GARDEN WOOD BURNER FROM A GAS BOTTLE ,come on safety first

Undoubtedly the worst music I have ever heard on a video, actually ever heard, period

Sloppy door

I did it with the Woodprix plans.

what a pile of scrap