How To Make A Manual Winch | Homemade Powerful Manual Winch

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch

Рет қаралды 579,686

2 ай бұрын

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch
Hello Everyone!
Today I show you how to make a manual winch. This homemade winch is a manual operated winch. This diy winch is very powerful. This diy manual winch is very simple to make at home. This diy winch lift is very cheap to make. I used scrap metals to make this diy winch. This homemade manual winch is very small and compact in size. Also this diy winch is less weight so this homemade winch can be very easily portable from one place to another place without any effort. This homemade winch machine is used to lift heavy weight. This homemade manual winch can also be used for heavy duty applications. I used sprockets and chain to increase the torque for this diy winch. I made a ratchet mechanism for this homemade winch. This diy ratchet mechanism is fixed to this homemade manual winch. This diy homemade winch machine may looks simple but it really performs very well. I personally enjoyed myself while making this diy winch build. This homemade manual winch really works good. I hope you guys will enjoy this making of diy homemade manual winch machine build
Click here to SUBSCRIBE Diamleon Diy Builds:
/ diamleondiybuilds
Support me on PATREON:
/ diamleondiybuilds
Social Media:
Facebook: / diamleondiybuilds
Instagram: / diamleondiybuilds
Twitter: / diamleondiy
Contact Mail Id:
diamleondiybuilds@gmail.com
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#homemadetools
#diytoolshomemade

Пікірлер: 99

@Xmen-tk9px 2 ай бұрын

I am following you from the country of Morocco. I have a request if you could show us how to make a feed crushing machine. I do not mean grinding it, but to make the size of the feed smaller and thicker so that chickens and chicks can swallow it easily.

@davelynn4993 27 күн бұрын

Very nice design, Good leverage with speed reduction. I've modified a winch that I bought and added a hex nut. The put a socket on a cordless drill and quickly reel in the cable after use.

@DiamleonDiyBuilds 26 күн бұрын

Thank you very much

@dimasdasilvamiranda4976 2 ай бұрын

a idéia é muito boa valeu obrigado Deus te abençoe sempre você e sua família

@yogabala7443 Ай бұрын

Tamil 18:27

@DiamleonDiyBuilds Ай бұрын

What bro

@magnoeuripedeslourencodias3025 12 күн бұрын

Quando for trocar o rolamento do lado da coroa vai ter que desmanchar tudo que fez.

@jimgree 2 ай бұрын

I like lock nuts also, good to see a job done right

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much bro❤

@user-sh4cl8pj9f Ай бұрын

فنان رهيب عاشت ايدك

@asressaraia2340 12 күн бұрын

very practical and useful. Maybe you can do a second one with a small electric motor- detachable ? thank you

@DiamleonDiyBuilds 6 күн бұрын

Thank you very much bro❤

@wahidtrafo6009 2 ай бұрын

I have followed dozens of your creative videos with all the complete extraordinary work facilities, we really like it, thank you for your knowledge, it has inspired many people

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much bro❤

@vinceianni4026 2 ай бұрын

Hello mister beautiful idea good job well done

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much dear

@idecreativ87 2 ай бұрын

Sangat kreatif dan sangat menginspirasi, terimakasih sudah berbagi

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much dear

@joaorosadecarvalho6000 Ай бұрын

Parabéns pelo vídeo, muito importante.

@DiamleonDiyBuilds Ай бұрын

Thank you❤

@JoseCarlos-ip5rc 2 ай бұрын

Excelente, vou salvar esse vídeo.

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much dear

@user-bk1ft2be9u Ай бұрын

Такие ролики приходится смотреть по два раза, если он заинтересовал тебя, первый раз начало и конец, чтобы понять насколько интересен для тебя результат работы, а дальше пересматривать если интересен. здесь можно сделать пару усовершенствований, первое. сделать съемную рукоять, и на валу большой звездочки сделать второе крепление рукояти, -- если груз легкий то можно крутить и вал большой звездочки, у меня магазинная лебедка, и рычаг привода не намного длиннее чем рукоять с видео, а лебедка без дополнительной звездочки поднимает более 1000 кг. А так идея хорошая.

@medianmuhnna7249 Ай бұрын

Great job. but long video 🎉

@DiamleonDiyBuilds Ай бұрын

Thanks man❤

@ROVITTv 2 ай бұрын

Very nice

@DiamleonDiyBuilds 2 ай бұрын

Thanks man

@leepatton1180 2 ай бұрын

Nice job

@DiamleonDiyBuilds 2 ай бұрын

Thanks man❤

@Ropetangler Ай бұрын

I must say that I prefer some preamble on a project like this. A brief description of what you are doing and what materials, sizes etc involved. I also prefer to have a project which bolts together than one which is fully welded, it makes for much easier changes to design or parts replacement, but having said that, welded construction is quicker (but dirtier), so perhaps there is a place for it. The fastening of your winch rope is very rough, a wedge and becket would be much better and neater also, even a couple of grub screws would have been better IMHO. Also your rope clamps looked to be installed incorrectly. The U bolt should always go over the rope end which is not loaded, and the loaded end should be fitted to the saddle of the rope clamp. It is good practice to have at least 3 turns left on the drum before any load is applied, better still around 5 turns, so the rope won't pull out of its anchorage as you take up the load. I know that you had more turns on in your demonstration but some of your followers may not be aware of this issue.

@Sandorvalsiepiereki 2 ай бұрын

Muito bom mesmo.

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much bro

@404nouserinformationfound Ай бұрын

Instead of the cable clamps drill and tap the shaft for a set screw, like real winches. And the shaft and bearings on the primary side could be reduced in size to decrease cost.

@hmarvin3791 Ай бұрын

Y cuando le quita el seguro como hace para que la carga no se caiga ?

@jairomota5825 2 ай бұрын

excelente

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much dear

@recepgumus21 2 ай бұрын

Very Good work.The only problem when lowering the load.You can not lower the load halfway.Otherwise load will drop with high speed. so it is danger,I think.

@DiamleonDiyBuilds 2 ай бұрын

Thank you very much bro

@josejohn3006 Ай бұрын

Super, strong!

@DiamleonDiyBuilds Ай бұрын

Thanks man❤

@mrdash1735 Ай бұрын

Good job 👍

@DiamleonDiyBuilds Ай бұрын

Thank you very much dear

@victoraviles5002 2 ай бұрын

Un cable talves más grueso o un cabo de buena calidad pero igual esta excelente

@DiamleonDiyBuilds 2 ай бұрын

Thanks man

@user-mx3sl4bp8i 2 ай бұрын

Можно вечно смотреть; На огонь.... На воду... И каким образом работают другие люди!!!

@joaobatistasevero8205 2 ай бұрын

Paraben muito bom

@DiamleonDiyBuilds 2 ай бұрын

Thank you dear ❤

@user-vt2ml4du3g 2 ай бұрын

Можно вечно смотреть на три вещи - как течёт вода, как горит огонь и как работают другие!

@Bianchi77 Ай бұрын

Creative video, thanks :)

@DiamleonDiyBuilds Ай бұрын

Thank you very much dear

@kjmonosr 29 күн бұрын

nice work what type and brand of cutting wheel are you using on the hand grinder?

@DiamleonDiyBuilds 19 күн бұрын

Thanks man❤. I use yuri brand cutting wheels

@johnbower Ай бұрын

Because you let the welding current pass through the ball race bearings you now need to fit four new ball races :(

@ieatYTP59 28 күн бұрын

i would use gears instead of the chain, to prevent failure

@DiamleonDiyBuilds 26 күн бұрын

Thanks for your suggestion bro❤

@HariHaran-nk7ji 2 ай бұрын

Great winch man awesome!!!

@DiamleonDiyBuilds 2 ай бұрын

Thanks dude ❤

@alatt9232 2 ай бұрын

After lifting a heavy weight , how would you control and down that weight?

@DiamleonDiyBuilds 2 ай бұрын

I used sprockets and long rotating handle to control heavy weight

@Mwalaevans 3 күн бұрын

See dont weld near berings u melt the greese inside

@tuskaghe 2 ай бұрын

Everyone praises this project, but no one thinks about the danger it presents with great weight.

@TheGoatShowMan 2 ай бұрын

I think ya needed a little more weld on that one part. 😂

@DiamleonDiyBuilds 2 ай бұрын

Which part

@dianatuanama1276 Ай бұрын

No lo veo seguro por lo menos 2 o 3 transmiciones lo faltan cuanto mas lento mas seguro porque ai lo sueltas te chanca los huesos de la mano

@karimmouhend5899 Ай бұрын

💪👍👍👍👍

@DiamleonDiyBuilds Ай бұрын

Thank you very much dear

@nazirshaikh5620 2 ай бұрын

Supar sir

@DiamleonDiyBuilds 2 ай бұрын

Ok sir thank you❤

@user-wh2ug7le8j Ай бұрын

Xin giá

@Guzzi_Cali2 Ай бұрын

Very rough design. All welded. Half of these connections could be solved with bolts and nuts. The fixing of the rope with two clamps - NO WAY! Pure flub.

@magnoeuripedeslourencodias3025 12 күн бұрын

Mais uma cagada,o eixo menor ficou todo soldado,trocar rolamento ja era.

@nguyentudat8202 2 ай бұрын

Cái này kéo đồ nặng mà muốn nhả ra thì toang hết. Phải thiết kế chiều hãm nhả khi kéo nặng

@RegiPavan 2 ай бұрын

Can be dangerous when you release the locking ratchet...

@DiamleonDiyBuilds 2 ай бұрын

Not dangerous bro. It's very easy to handle

@joseangelalatorrevelazquez4934 Ай бұрын

No estas usando la herramienta correcta

@jassalmedia6877 Ай бұрын

Demonstration not clear

@dawnac6453 2 ай бұрын

There's only a couple of problems with all these DIYs. He doesn't give the dimensions of the metal cuts and widths and other stuff and secondly,,, how many average people has the kind of tools like that lying around to be able to make stuff like that? LOL

@nancycook3733 2 ай бұрын

Well I think what this gent is doing is good and it's up to you to decide how big or small that you want to do this hence the measurements, and secondly as tools go use the brain cells and make minor modifications and build it using what u have on hand, myself 3 different welders and different sized grinders so modification away I go, lol, and say instead of welding all together why not drill and bolt it together lol

@dawnac6453 2 ай бұрын

@@nancycook3733 yeh well not everybody has a complete STEEL WORKING shop in thier backyards either. I'm not saying he doesn't do good work because he most definately does...but try doing it without all thise mills and lathes and drill presses. That's my point. The measurements would be a BIG plus... Not just showing a hunk of metal and expecting it to work. I don't build ANYTHING without some kind of measurements. I also have welders but not the fancy ones. Mine is only good for doing small projects. And your bolt and hole theory might work for some stuff... But not all. Just makes things much more complicated.

@sunil2102 2 ай бұрын

So if you want to get measurements you have to pay subscription 😅

@olegpoheretski190 2 ай бұрын

он даёт нам возможность, когда мы лежим на диване,думать что мы работаем❤

@dawnac6453 Ай бұрын

@@jimmiecharley6505 very good .. GENIUS!!!

@user-wh2ug7le8j Ай бұрын