How To Make a PERFECT INLAY with a CNC Router, Easy CNC Router Projects

Рет қаралды 353,372

2 жыл бұрын

This video tutorial shows you the easy way how to make a perfect inlay with a CNC router... how to do wood inlay projects with your CNC router. This step-by-step CNC woodworking inlay tutorial guides you how to design inlays, to writing gcode files, to set up a CNC router for inlays, to finishing the wood inlay project. You will learn what are the best router bits for inlays. If you've been looking to learn how to CNC woodworking inlay projects, this is the best CNC router inlay video.
This inlay tutorial uses Vectric Vcarve desktop but is good for vcarve pro and vectric Aspire, as well. The methods used in this CNC router inlay project can be used for most CNC router design woodworking projects software, such as Carveco, Easel, Carbide Create and others.
You will find creating wood inlays on a CNC router is rather easy when you understand the proper steps to design your inlay.
These inlay methods for any CNC router brand.
FREE BEGINNER'S CNC KICK-STARTER GUIDE → bit.ly/3DXGHAK
_________________________________
CNC ROUTER BITS USED FOR INLAYS
1/8" Up-cutting bit → link.idcwoodcraft.com/irscas
90° bladed v-bit → link.idcwoodcraft.com/liehq9
60° bladed v-bit → link.idcwoodcraft.com/mc9e1i
30°, 60° & 90° blade v-bit set → link.idcwoodcraft.com/whvhp6
Wide 60° v-bit → link.idcwoodcraft.com/hbzk1w
1" Surfacing bit → link.idcwoodcraft.com/128eea
Complete 11pc CNC router bit starter set (free files) → link.idcwoodcraft.com/qfgn4k
--------------------------------------------
OTHER MATERIALS USED FOR INLAYS
Sanding/Buffing Brushes → link.idcwoodcraft.com/u82epk
Starbond CA Glue & Accelerator → bit.ly/3g81RRU
Titebond Wood Glue → amzn.to/39rwP3f
Painters tape → amzn.to/3lydYsC
Flexible scraper → amzn.to/39eXbFg
Dremel → amzn.to/3Eo6EbE
Fast-drying polyurethane → amzn.to/2XlzSqH
Lacquer spray → amzn.to/3CxX4l5
Scroll saw (best quality) → amzn.to/3AoDas4
Scroll saw (alternative) → amzn.to/2Xroud4
Scroll saw blades → amzn.to/3Ah058o
__________________________________
RECOMMENDED DESIGN SOFTWARE
Vcarve Pro (RECOMMENDED)→ link.idcwoodcraft.com/oeryy6
Vcarve Desktop → link.idcwoodcraft.com/2hn2wd
Vectric Aspire → link.idcwoodcraft.com/hiqihk
Cut2D Desktop → link.idcwoodcraft.com/bdi7us
Carveco → link.idcwoodcraft.com/v37zex
__________________________________
LONGMILL CNC ROUTER
Website → link.idcwoodcraft.com/dtz51t
Longmill MK2 Review Video → • Video
_________________________________
IMPORTANT SETTINGS FOR INLAY PROJECTS
→ Use the V-carve function for both parts
→ For the Female inlay component
Start depth 0.0
Flat depth 0.11 (2.794mm)
→ For the Male Inlay component
Start depth 0.09 (2.286mm)
Flat depth 0.02 (0.508mm)
To download this FREE feather inlay project with instructions & g-code files
Download here → link.idcwoodcraft.com/free-in...
#inlay #inlayprojects #cnc #cncrouters #cncforbeginners #vcarvetutorials #vectric
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: link.idcwoodcraft.com/rvn44v
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
---------------------------------------------
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): idcwoodcraft.com/cnc-lp2-free...
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: bit.ly/3rg4WTl
CNC ENTREPRENEURS: bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
------------------------------------------------------
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: anchor.fm/cnc-for-beginners
Garrett Fromme
Facebook: IDCWoodcraft
Website: www.idcwoodcraft.com
Email: support@idcwoodcraft.com

Пікірлер: 1 000

@IDCWoodcraft 2 жыл бұрын

I hope you enjoyed this Inlay video tutorial. If you are interested in the Longmill CNC router, please use this affiliate link. Thank you in advance: sienci.com/product/longmill-idc-woodcraft/?ref=IDCWoodcraft

@williamcovell6324 2 жыл бұрын

Another 15 🍵 video. You are a busy guy 😜.

@steveburke3194 2 жыл бұрын

*ji*juu*+>j*

@steveburke3194 2 жыл бұрын

@@williamcovell6324 ((k²

@billjohnson6917 2 жыл бұрын

How do I join your site so I can get the g code file, tools you used and see your store. I just purchased a longmill because of your videos. My first CNC. Thanks

@IDCWoodcraft 2 жыл бұрын

@@billjohnson6917 my site is IDCwoodcraft.com You can get to the store from there. Is that what you're asking? If you want to get on the CNC Insiders list, sign up with this link idcwoodcraft.com/cnc-lp2-free-files/

@faragmostafa633 10 ай бұрын

I'm used to larger, corded routers kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

@IDCWoodcraft 10 ай бұрын

Farsgmostafa633, I couldn't agree more brother!

@BruceMac 2 жыл бұрын

Best video you have ever made Garrett. Really well done, thoughtful and easy to follow. Fantastic final result!

@IDCWoodcraft 2 жыл бұрын

Wow! Thank Bruce!

@the_taranator 24 күн бұрын

Coming here 2 years later and using your video as research 😂. I can't say thank you for me making my first inlay because I don't even have a machine yet but thank you for such a detailed video and for the enthusiasm in making such a cool thing. I really appreciate unselfish people like you who share your knowledge and experience to help others. I'm excited and can't wait to get my first cnc machine and try my first inlay.

@IDCWoodcraft 21 күн бұрын

the_taranator, That's fantastic to hear! I'm glad you found the video helpful and are excited to start your CNC woodworking journey. Best of luck with your future projects - happy creating!

@ronaldscholtens7718 2 жыл бұрын

One of the best honestly and detailed tutorials. Thank you so much!

@IDCWoodcraft 2 жыл бұрын

Ronald, you're very welcome. Glad it helped you!

@douglasmagrich8407 2 жыл бұрын

Outstanding instructional video. Thank you. I am A CNC Machinist of 40 years experience. I plan on doing this type of Fine Wood Working as A Retirement income source. Thank you

@IDCWoodcraft 2 жыл бұрын

Hi Doug. Inlays are tremendous fun and they are beautiful. AND...they are easy once you get it down.

@ronmisiura9169 9 ай бұрын

Me too, what you said!

@nickdegidio2544 2 жыл бұрын

Most informative video I've seen on inlays. Thank you for taking the time to teach.

@IDCWoodcraft 2 жыл бұрын

Thank you Nick. So, are you gonna make an inlay now?

@toddkrueger4693 Жыл бұрын

Probably the best CNC tutorial I have seen! Thank you Garrett!!

@IDCWoodcraft Жыл бұрын

Thank you Todd, I appreciate that brother! Glad you enjoyed the video.

@richardM980 2 жыл бұрын

Excellent walk thru! Thorough and entertaining as well. Inlays here I come!

@IDCWoodcraft 2 жыл бұрын

Send pictures when you have it made. I want to see what you did!!!!

@jerrycarnley7673 2 жыл бұрын

What an amazing video ! One of the most clear CNC instructional videos out there. Fantastic instructor! Thanks for creating and sharing with others.

@IDCWoodcraft 2 жыл бұрын

Thanks Jerry, you're making me blush!

@craig2963 2 жыл бұрын

I was a CNC lathe operator for 20 years and I was so excited to see the technology being made affordable. And for wood carving platforms I knew people would use them to make amazing projects.

@IDCWoodcraft 2 жыл бұрын

Hey Craig. Having been a CNC machinist, you know how fascinating it is. Yes, I was definitely excited as well!

@MrMegawatt10 2 жыл бұрын

This is simply the BEST instruction on how to correctly do an inlay. Thankyou again Garrett!!

@IDCWoodcraft 2 жыл бұрын

Thank you and You're welcome Bob!!!

@timothyd4829 2 жыл бұрын

Thank you Garrett for this tutorial and walkthrough.

@IDCWoodcraft 2 жыл бұрын

You're welcome Tim.

@cgswss 2 жыл бұрын

Thank You!!! ( of course I know you did this just for me). It is amazing the amount of time and effort you put into these vids! I hope everyone will subscribe, after watching this! I love that you keep showing us little tricks that most vids don’t show. Keep up the GREAT work!

@IDCWoodcraft 2 жыл бұрын

Hi Craig. Thanks for the comment. This inlay video tried to beat my ass. It took 4 12 hour days to shoot and edit it. For every minute of video you see, there is about 15 minutes of work put into it. lol, and I thought this was gonna be aneasy one.

@accountdeleted3706 11 ай бұрын

@@IDCWoodcraftthank you

@zofo264 2 жыл бұрын

I actually feel confident that I could make an inlay after watching this video! Now, I just need a CNC router :)

@IDCWoodcraft 2 жыл бұрын

Hey Zofo. so when are you going to get it?

@Sbregher 2 жыл бұрын

Inlays here I come!! Great video Garrett!

@IDCWoodcraft 2 жыл бұрын

SB, you'll absolutely be hooked!!!!!

@jamiemartinwebb 2 жыл бұрын

Excellent, this video should be the go to for all makers looking to do inlays. Love the way you show the process from start to finish. Thank you.

@IDCWoodcraft 2 жыл бұрын

Thanks Jamie, you are so kind. Thanks for your comments.

@garyspraggins899 2 жыл бұрын

An excellent tutorial, I learned so much from this session. I am a retired CNC machinist for about 12 yrs now working on Graphite material, thinking pretty seriously about getting back into it now that I've watch your videos several times and seeing the cost factors are reasonable and the tech sure looks a lot easier now and it would let this older man have fun again. Keep up the good work.

@IDCWoodcraft 2 жыл бұрын

Gary, CNC is so much fun, and of course, relaxing! Do it bro!

@soabiotn 2 жыл бұрын

Hi Garrett, Amazing video I didn't realize how easy it was to do inlays. This would have to be the best video I have seen online and your teaching skills are at another level. Well done mate. I will be adding you to my favorites list of KZfaqrs to watch.

@IDCWoodcraft 2 жыл бұрын

Hi Brian. Wow. Thanks. Once you get inlays down, you'll find them easier than some other 'normal' designing tasks, and to create. Please be sure to send pictues of your first few. I'd love to see them.

@VinceMontefusco 2 жыл бұрын

Greetings, I used your Inlay dimensions. The parts fit, but there was no gap between parts. I glued up and waiting to see the results tomorrow. I will let the glue set for a day. Thanks bud, Vince

@errolengelhart1336 2 жыл бұрын

Love it ,thank you men ,GOD BLESS YOU

@IDCWoodcraft 2 жыл бұрын

Hi Emol. Thank you so much. And God bless you, my CNC brother

@gwargolet 2 жыл бұрын

Garrett, absolutely love you videos, this one is off the charts. A very thorough and detailed video. Thanks for sharing your knowledge and expertise. I bought a CNC last year but haven't used yet, just trying to gain as much knowledge as I can before starting to use. With this detailed tutorial and template you're sharing, this may be my first project, can’t wait. Thanks again.

@IDCWoodcraft 2 жыл бұрын

Hi Glenn...and I can't wait to see what you create!!

@gwargolet 2 жыл бұрын

@@IDCWoodcraft Unfortunately, I searched all over but don't see link to the vetric file at the bottom of the video, not sure why. Is there any other way to get the link, thx in advance and keep up the great work?

@IDCWoodcraft 2 жыл бұрын

@@gwargolet sure. here ya go → bit.ly/3usSPnP

@gwargolet 2 жыл бұрын

@@IDCWoodcraft thanks for the fie and he quick reply.

@jayfmiller 2 жыл бұрын

1) If you use the blue tape hold down on a smooth table surface and the workpiece. Apply the CA (super glue) to the back of the tape on the workpiece and the Accelerator on the back of the tape on the table surface. This gives you an extra few seconds for positioning before the accelerator "kicks off" the CA. And, any bleed-through of the CA will be on the back of the work piece (sand it off) rather than your machine table surface. 2) If you are going to use a table saw (as Garrett shows in this Video) PLEASE use a "zero clearance insert" for the throat of the saw. This will keep the scrap from dropping into the saw. 3) Buy a push-stick or carve yourself one to keep all of your fingers the same number and length. I have been woodworking for 40 years and I have too many acquaintances called "3-finger Joe."

@IDCWoodcraft 2 жыл бұрын

Hi Jay. I had a zero clearance plate. Couldn't find it. Good tip with the CA glue. I will make a pusher and make a video about it.

@GlueTubber 2 жыл бұрын

I had a couple of '3-finger Joe' uncles. They instilled the need for safety in me...

@grahamrankin4725 Жыл бұрын

I do thhe opposite. CA on tape on spoil board, spray on work piece. That way, CA won't drip when turning a workpiece over.

@allhatnocattlews Жыл бұрын

Thank you sir...followed your instructions and the inlay came out perfect.

@IDCWoodcraft Жыл бұрын

DeadInside, thats great news! Glad it worked out great for you!

@grantpeckford2035 2 жыл бұрын

Wow ,this is your best video yet! This is the perfect project for me because I make boxes for eagle feathers for smudging! This came at the right time!

@IDCWoodcraft 2 жыл бұрын

Grant, what a match for the projects you make!!!

@kkclark14 2 жыл бұрын

I have watched your American Flag Video as well. You are an amazing instructor. I have a note book full of notes and have started making signs at the local wood school (Sam Beaufort) in Adrian Michigan. I plan on getting your starter set of bits just so I have my own. Thanks for doing what you do. Retired CMS John Clark USAF

@IDCWoodcraft 2 жыл бұрын

Hey Karen, wow thank you so much! I'm so glad to help! Wood school sounds awesome, I'm sure I would have plenty to learn from your notebooks too! Keep up the good work!

@MikeSmith-to4yd 2 жыл бұрын

Wonderful Garrett absolutely wonderful thank you for the time it takes to do this you are very good at what you do thank you again sir

@IDCWoodcraft 2 жыл бұрын

Hi Mike. Thank you! I tell ya', sometimes, putting videos like this together are taxing. This video (inlay) took 4 solid days to create.

@lonniemccartney8227 2 жыл бұрын

Loved this vido you make it so easy to understand.Thank you very much.

@buckeyewoodshop 2 жыл бұрын

Hey Garrett, Project looks great, but, why not use the "Create Inlay Toolpath" in Vectric?

@IDCWoodcraft 2 жыл бұрын

Because i want eople to understand toolpaths. I'll show that one next. thanks for suggesting it.

@TNDWW875 2 жыл бұрын

Also the inlay tool path does not allow for sharp corners

@costie31 2 жыл бұрын

Many thank for all the work you have done to create this. I am just starting with CNC and this is pure gold 🏆

@IDCWoodcraft 2 жыл бұрын

Costi, you're so welcome! I'm always happy to help! Keep up the good work!

@jenniferedwards7356 Жыл бұрын

Garrett, you are a fantastic teacher. I have learned almost everything I know about CNC routing from watching your videos. And your bits are absolutely the best. Thank you for doing these videos.

@IDCWoodcraft Жыл бұрын

Jennifer, thank you for the kind words. I'm humbled to be a part of your CNC journey and truly love what I do! Thanks for all the support my friend. Keep up the great work!

@michaelgerrior2844 Жыл бұрын

Thank you for all your help for new people like me.

@IDCWoodcraft Жыл бұрын

Michael, you are so welcome my friend.

@PeterDorr 2 жыл бұрын

great video again. I can't wait to try this myself. Much appreciated.

@IDCWoodcraft 2 жыл бұрын

Peter, you're going to be so proud of making a inlay! They are so much fun!

@lylepollett2234 2 жыл бұрын

Thanks for this video. I've tried simple inlays in the past without success. I'm anxious to try again now that I know more. Your videos are always a blessing to me.

@IDCWoodcraft 2 жыл бұрын

Hi Lyle. I think this will help quite a bit. Inlays are easy once you get used to them, but they are tricky yo learn at first.

@Drokot1 2 жыл бұрын

Thank You! Have watched many of your videos. Great teacher!!!

@IDCWoodcraft 2 жыл бұрын

John, you are totally welcome!

@okiedoak201 2 жыл бұрын

Just watched the inlay video....you are awesome and I will put this on my MUST to do project list....I'm new to CNC but this looks like a great task and not overly complicated.....thank you so very much for all your teaching....👍👍

@IDCWoodcraft 2 жыл бұрын

OKI, inlays are really easy once you understand how they work. Do about 3 of them and you'll see what I mean. Yes, it is definitely a top of the list project to do

@FALCON390CNCWorks Жыл бұрын

This is the most comprehensive inlay tutorial I have ever seen. I'm planning to make my first inlay shortly. This will be made into a video and I will defenilty link your video for other people to learn. Thank you, Garrett 👍

@IDCWoodcraft Жыл бұрын

falcon390CNCworks, you're very welcome! I'm looking forward to seeing your inlay my friend. Happy cutting!

@MattMadeIt123 2 жыл бұрын

Just watched the intro. Won't have time to watch this until this weekend. Really looking forward to it. The inlay with the walnut grain running opposite to the oak grain looks really nice.

@IDCWoodcraft 2 жыл бұрын

Hey MAtt. I'm assuming you've watched this by now. What did you think?

@MattMadeIt123 2 жыл бұрын

This is one to be proud of. Excellent video. If someone wants to do inlays, this is the only video they need. 👏👏👏👍

@John-xm7yc 2 жыл бұрын

I'm starting the pot of coffee right now! Thank you Garrett!

@IDCWoodcraft 2 жыл бұрын

Awesome!!! Tell me what you think about this one

@John-xm7yc 2 жыл бұрын

@@IDCWoodcraft This is beyond exciting. Im sending my pops a file to run this weekend! We are blessed to have you showing, explaining and helping us!

@randymalo6608 2 жыл бұрын

Thank you Garrett, these are some of the best and most informative videos I have seen. You make the information very easy to understand. Thank you Randy Malo

@IDCWoodcraft 2 жыл бұрын

Hi Randy. I am glad this has helped you. And your comment shows I am doing it the right way!

@robertsweet4255 Жыл бұрын

brilliant garret

@IDCWoodcraft Жыл бұрын

Robert, glad you liked this one brother!

@jkumm12 9 ай бұрын

A very good detailed set of steps to enable even relative newcomers to the cnc world to produce an inlay product to be proud of. This will surely give newbies the impetus they need to explore this aspect of cnc routing much more deeply. Congratulations Garrett.

@IDCWoodcraft 9 ай бұрын

Jkumm, I am so glad you enjoyed this one brother!

@jonatanvareiro4644 2 жыл бұрын

Melhor aula que assisti sobre o assunto. Trabalho perfeito. Muito obrigado por compartilhar seu conhecimento.

@IDCWoodcraft 2 жыл бұрын

Jonatan, você é tão bem-vindo! Que bom que foi útil meu amigo!

@pedroiiiflores3032 2 жыл бұрын

Yes, I want to do an inlay! Thank you.

@IDCWoodcraft 2 жыл бұрын

Pedro, im excited for you brother!

@mikeseguin3498 2 жыл бұрын

Thanks for the "GREAT" video. As a new CNC'er you have help me learn a lot with both the Vectric software as well as the whole cnc process. keep up the good work, it's very much appreciated

@IDCWoodcraft 2 жыл бұрын

Hi Mike. I'm super glad to hear this. Keep learning my friend!!!

@ronkemp3892 2 жыл бұрын

Great video on creating inlays. I was very impressed. I can't wait to start.

@IDCWoodcraft 2 жыл бұрын

Thanks Ron. kzfaq.info?event=video_description&redir_token=QUFFLUhqbWZ3MWJtc0RkWWZRQkhCNmJxRUlyTUZzWUtWQXxBQ3Jtc0tscmludHl1a09PMDFoOVNST091MUhmcFJyZVJDdFNSdUkzTC1TZmxiQjBxZ3hvdXN4RmhPZTdVeVBnZkFrOEZrLURxSElXc2tsRFl4aWFHRWVhcTh1YkFWLUZhOU81S3hsU0xMQ2Z5SmtYODdkYjlQbw&q=https%3A%2F%2Fsienci.com%2F%3Fref%3DIDCWoodcraft

@mikedawes6185 2 жыл бұрын

Excellent tutorial Garrett, easy to follow and well explained, I learned a lot and will be having a go at this this weekend!

@IDCWoodcraft 2 жыл бұрын

Hi Mike. Please send a picture of the finished project. I'd love to see.

@timothypropst238 8 ай бұрын

Did my first inlay using your numbers and methods and it turned out flawless. Couldn’t be happier.

@IDCWoodcraft 8 ай бұрын

timpthypropst, glad to hear it brother!

@GyWO10 Жыл бұрын

Wow, I’m excited to give this a try as I can think of some amazing projects to use this one!

@IDCWoodcraft Жыл бұрын

Dawayne, please do! Have fun brother!

@ruudb72 2 жыл бұрын

Thanks!! For the nice and good instructions. This a real step by step one and easy to follow and understand.

@IDCWoodcraft 2 жыл бұрын

Hi Ruud. Thank you. Did it help you?

@chris407x Жыл бұрын

Excellent video. Thank you!

@IDCWoodcraft Жыл бұрын

Chris, you are so welcome my friend.

@williamvalachovic Жыл бұрын

love the video as usual Garret you nailed it

@IDCWoodcraft Жыл бұрын

William, so happy to hear that brother! Happy CNCing.

@jamesfleming1643 2 жыл бұрын

March 2022: What a fantastic video. One of the best i've seen. Congratulations on done such an outstanding job.

@IDCWoodcraft 2 жыл бұрын

James, wow thank you!

@kayakerfl 2 жыл бұрын

Outstanding instruction, video and details. Really enjoyed learning.

@IDCWoodcraft 2 жыл бұрын

Hi Halloway! Thank you. So you got something out of this one, then?

@davidw1324 2 жыл бұрын

Great Video Thank you.

@IDCWoodcraft 2 жыл бұрын

David, you're so welcome!

@Johnny.D 2 жыл бұрын

Thank you for this one Garrett. I am getting very excited about getting my machine and doing inlay work.

@IDCWoodcraft 2 жыл бұрын

Hey Fungus. How much longer before it arrives?

@Johnny.D 2 жыл бұрын

@@IDCWoodcraft it's actually Furgus. I am number 15 on the shipping list so maybe in a week or two.

@louiepelletieriii6541 2 жыл бұрын

OK that's it. I'm hooked. Next project is an inlay! Another great video Garrett

@IDCWoodcraft 2 жыл бұрын

Louie, you're gonna love doing inlays!!!

@greggmoorman5985 Жыл бұрын

Outstanding job !!! Can’t wait to do it

@IDCWoodcraft Жыл бұрын

Gregg, glad you liked this one my friend! I am excited for you to make it yourself.

@davidwang4680 2 жыл бұрын

Thanks for your tutorial video , I’ve been wanting to try inlay for a long time

@IDCWoodcraft 2 жыл бұрын

Hey David. Now's the time!!!

@chinnameyyappannarayanan8376 2 жыл бұрын

your teaching skill is outstanding.

@IDCWoodcraft 2 жыл бұрын

Chinnameyyappan, Thanks brother, glad you're enjoying the content.

@aaronkuhaulua5580 2 жыл бұрын

Thanks for making these tutorials Keep up the good work.

@IDCWoodcraft 2 жыл бұрын

Thanks Aaron. I will.

@collinsganson5115 2 жыл бұрын

Great Job!!!

@IDCWoodcraft 2 жыл бұрын

Thanks Collin

@BoxOfShims 4 ай бұрын

I just cut my 1st inlay today and it work perfect. Thanks* for all that you do Garrett.

@IDCWoodcraft 4 ай бұрын

BoxOfShims, Right on brother! Congrats on your first inlay.

@geoffe427 2 жыл бұрын

Hi Garrett, that was an excellent instructional video. So easy to follow what you're doing and talking about. Cheers, G.

@IDCWoodcraft 2 жыл бұрын

Geoff, thank you! I'm always happy to help brother, cheers!

@CAPTAINJ777 Жыл бұрын

Really appreciate the details you put in this explanation. Nice job for us novice’s

@IDCWoodcraft Жыл бұрын

Captainj777, My pleasure! Glad it was helpful!

@Qhund Ай бұрын

Great video. Explains it ALL! Thanks!

@IDCWoodcraft Ай бұрын

Qhund, Glad you found the video helpful! Happy woodworking!

@rcmunro 6 ай бұрын

Great tutorial for the beginner! Thank you for doing this!!

@IDCWoodcraft 6 ай бұрын

rcmunro, you're so welcome brother! Glad to help!

@grahamrankin4725 2 жыл бұрын

Definitely I can see many ideas

@IDCWoodcraft 2 жыл бұрын

Graham...I love inlays and they are easy and fast when you get it.

@eyaltargel 2 жыл бұрын

Great video,thanks 👍

@IDCWoodcraft 2 жыл бұрын

Glad you enjoyed the video

@peterclark7761 2 жыл бұрын

This is a nice start to finish tutorial. You have inspired me to try the feather as my first CNC project. After my UCTD diagnosis I sat around looking for something to do, my son I got a small CNC for me for Christmas. And have been humming a hawing about starting something.. Looking for that perfect project. But you have made me realize that whatever project I do it will be that perfect project. Thanks

@IDCWoodcraft 2 жыл бұрын

Peter, exactly....just start on something. Now you have something amazing to make. I want to see pictures.

@jeffsinason4336 2 жыл бұрын

This is so awesome. This has truly peaked my interest on expanding my wood skills to include cnc. Thank you.

@IDCWoodcraft 2 жыл бұрын

Jeff, Isn't this the coolest thing in woodworking? CNC is the new era my friend.

@jeffsinason4336 2 жыл бұрын

@@IDCWoodcraft Truly is. Since I'm a complete beginner I'm consuming all your videos to help me make the decisions. The inlay technique really gives me an amazing number of ideas of what can be done. I have a huge source of walnut and oak since I live in Tennessee and have used it for Arts & Craft furniture in the past. Now the idea is Art Deco inlays to go with it....

@stacymcvey4229 11 ай бұрын

You're definitely one of the best instructors I've seen helping others working with Vectric and CNC work. You're very clear and you make things a lot easier to understand. You're my go to when I need help. Thanks for taking the time to teach others the best techniques out there. I've learned so much from you. You rock! Keep it up!

@IDCWoodcraft 11 ай бұрын

Stacy, wow, thanks! I'm humbled! I'm glad to be a part of your cnc journey and hopefully make things a little easier along the way! Happy cutting!

@sled7782 Жыл бұрын

I’m really looking forward to doing my first inlay. Excellent video!!

@IDCWoodcraft Жыл бұрын

Sled, I am excited for you to try it out my friend.

@roy.h.barrett Жыл бұрын

Cutting tomato stakes and one of those pieces hit me... I got a little chuckle out of that as it shows the mistake, learning and and safety curve.. This is a great video and period of instruction. I am totally looking forward to to completing my set up and adventure!!! Thank you Sir!

@IDCWoodcraft Жыл бұрын

Roy, glad you liked this one brother! Im looking forward to you getting your machine all set up.

@marklitvin2422 2 жыл бұрын

Just purchased an X Carve 1000x1000, definitely will start with this!! Absolutely gorgeous!

@IDCWoodcraft 2 жыл бұрын

Mark, make sure you send a picture of it. I'd love to see!

@marklitvin2422 2 жыл бұрын

No problem!

@bobmonday925 Жыл бұрын

Love this channel..going to be getting a cnc soon..great teaching instruction..thank you

@IDCWoodcraft Жыл бұрын

Bob, glad you liked this video my friend. Hope you pick up a CNC soon so you can do projects like this too!

@antonkunkel6662 Жыл бұрын

Great Video Thank you! Planning to get started right away.

@IDCWoodcraft Жыл бұрын

Anton, that's great news my friend. I'm excited for you to make your first inlay!

@antonkunkel6662 Жыл бұрын

@@IDCWoodcraft I TRIED TO DOWNLOAD ALSO TAKING NOTES. WILL TRY AGAIN.

@chrisobradovits408 2 жыл бұрын

Outstanding tutorial

@IDCWoodcraft 2 жыл бұрын

Thanks Chris!!

@rickjackson4330 2 жыл бұрын

Thank you so much for making this video. Just yesterday I was designing an inlay for a chef friend of mine, my plan is to put his logo into a cutting board using several species of wood for contrast. Your video cleared up so many questions about depth of cut and offsets between male and female pieces. I'm feeling a lot more confident about doing this, buy yeah I'm going to make a couple of your feathers first.

@IDCWoodcraft 2 жыл бұрын

Hi Rick. I am glad you will practice first. that way you'll know how to make the one for your boss. Be sure to send me pictures when you're done. I want to see it!!!

@residuevideos Ай бұрын

Much much much appreciated. Amazing video and outcome.

@IDCWoodcraft Ай бұрын

residuevideos, you are so welcome brother!

@G8YTC 2 жыл бұрын

Super project. This will be my first of 22 when we return home from Xmas holidays. All the best from the UK.

@IDCWoodcraft 2 жыл бұрын

Hey Dean. Merry Christmas. I can't wait to see what you start making!!!

@playamytrumpet 2 жыл бұрын

Fantastic video instructions for the absolute novice. I’ve watched a few videos on inlay but yours is the best for the computer challenged and Cnc beginner. Thank you so much for sharing.

@IDCWoodcraft 2 жыл бұрын

Ken, you're so welcome! Glad it was helpful my friend!

@playamytrumpet 2 жыл бұрын

Garrett, something I forgot to mention, I had purchased a Genmitsu 4030 from SainSmart, part of the package was a free 3 month sub to Carveco. I’m able to find my way around the basics but nothing like inlays. Like I said before I’m new to CNC and might as well say the same goes for computers in general. I sure do appreciate all the assistance the fellows post on KZfaq.

@mataulys7287 2 жыл бұрын

Great CNC tutorial!

@IDCWoodcraft 2 жыл бұрын

Mata Ulys, thanks! Glad you enjoyed it!

@maleta666 Жыл бұрын

Thanks man, this is just amazing. Thanks for sharing your knowledge

@IDCWoodcraft Жыл бұрын

Javier, my pleasure brother! Happy cutting!

@garybaumann5637 2 жыл бұрын

Great video. Thank you.

@IDCWoodcraft 2 жыл бұрын

Gary, you're so welcome, I'm glad you enjoyed it!

@nobbynose4254 2 жыл бұрын

thank you so much

@IDCWoodcraft 2 жыл бұрын

You're welcome Nobby!

@psonparote 2 жыл бұрын

Amazing Video!

@IDCWoodcraft 2 жыл бұрын

Prabhakar, thanks! I'm glad it was helpful!

@billjohnson6917 2 жыл бұрын

This was great! Thank You

@IDCWoodcraft 2 жыл бұрын

Bill, glad you enjoyed it brother!

@Subbieman650 2 жыл бұрын

Wow, The way you explain things are very easy to understand! I'm hooked

@IDCWoodcraft 2 жыл бұрын

Hi Sub. Thank you!!!

@AlanGillis-tb2nk 4 ай бұрын

Thanks Garrett. Excellent video.

@IDCWoodcraft 4 ай бұрын

AlanGillis, you are so welcome my friend.

@miketeresitaalvarado321 2 жыл бұрын

Great video Garrett, very nice step by step video on a project I been wanted to try for awhile now, inlay seemed intimidating but glad to see this video come out especially when i use Vcarve also. Thx Garrett

@IDCWoodcraft 2 жыл бұрын

Hey Mike. I cn't wait to see what you guys do with inlays.

@Radiotexas 2 жыл бұрын

Brilliant! Thanks!

@IDCWoodcraft 2 жыл бұрын

Thanks Jay, and you're welcome

@hendersonhandmadeironwoodc8881 Ай бұрын

I can not wait to put the MK2 to work giving inlays a try Thank You for all the great info you provide and the tools to make it happen. Enjoy your Memorial Day weekend

@IDCWoodcraft Ай бұрын

hendersonhandmadeironwoodc8881, You're welcome! I'm so glad you're excited to try inlays with your MK2. Have a fantastic Memorial Day weekend!

@jeanblakeley-cook6023 2 жыл бұрын

totally worth the time investment for me to watch and rewatch this valuable tutorial. excellent content

@IDCWoodcraft 2 жыл бұрын

Wow. you watched it twice? Are you going to do an inlay? What will it be?

@matsutton4201 8 ай бұрын

Really helpful, Garrett. My very first CNC project a few years ago was an inlay with three different woods. Not sure why I decided to tackle that first. Lots of learning (and mistakes) took place! Your video makes something that can be seemingly daunting very doable and easy to follow. Thanks.

@IDCWoodcraft 8 ай бұрын

Mat, I'm glad you enjoyed it brother! I think we can all get a little overzealous with the excitement of getting started, trust me we've all been there! LOL