1. thank you for helping me find barrel connectors, they made my life easy with these lights and boards 2. thank you for going through all that programming stuff
@sushiFX.3 жыл бұрын
hi did you install these before?
@garforce23 жыл бұрын
@@sushiFX. install which?
@bryancenterfitt71273 жыл бұрын
Just discovered your channel. Needless to say I think your work is spot on! I'd like to see you do something with older vehicles that use the halogen bulbs in the housings.
@TemujinBorjiginUSA3 жыл бұрын
Got those modules and LEDs (with Lenses) already and YES, it was easy to set up and the animation was exactly what I was looking for, these are very bright and never get hot. Very stable system.
@rbmwiv2 жыл бұрын
Very good video, I have subscribed to the sequential squad. I have been working on cars for 30 years and been messing with electronics my whole life. I have been wanting to do sequential turn signals on my M3 and thanks for sharing your knowledge with the world. I have taught many mechanics over the years but not an audience the size of yours.
@leoortiz6613 жыл бұрын
Thank you for inspiring me to build my own lights man.
@bluspectre20422 жыл бұрын
This video makes me want to try modifying the LED Tail light rings in my S2 RX-8! I already do simple DIY Electronics, and your videos make it look like something I could learn to do myself!
@notavaliblein3d Жыл бұрын
You should do it. Custom Rx8 lights would be sweet
@Eagle69Biker3 жыл бұрын
I LOVE show mode # 1 (20:22) as a turn signal! That's just sick!
@RicardoPenders2 жыл бұрын
This is cool stuff, can you imagine changing out all the lights and add some more LEDs but then all buttons, switches, dashboard, everything on the inside of a car and I've done that multiple times in different cars but the end result is also looking really cool. I didn't have to animate the interior lights but changing the lights in those pesky buttons all over the place is very fiddly work and you can't do anything with your hands because you just can't put your fingers inside a button, and another thing to keep in mind is that you can't demolish the whole button to get the original light bulbs out, you have to do that in such a way that you can put it all together with the new LED and after you're done it still have to work for a long time without breaking that's the actual challenge but I always have a lot of fun doing it. The best part of it is when you're finished and you can look at all the work you just put into it all making it look way better. One thing that I loved is when I changed the dashboard light of my oldtimer VW Caddy, it had the original dials colored in some fluorescing orange and with my high powered blue LEDs those dials really popped out, just awesome. When I finished working on that car, changed the complete car in about 7 months in a little garage at home cutting out all the rusted panels and structural parts that were totally rotten through, made all the new panels and structural parts from sheet metal and banged it all by hand into the right shape, welded the whole car together again, pulled out the fenders to make the wheel arches bigger for bigger wheels, lowered the suspension, pretty much everything from the ground up in about 7 months all by myself and I had it just two weeks finished and on the road again and got an offer that I couldn't refuse which is getting a VW Golf Mark 2 GTI Fire and Ice Edition with a brand new motor in it and completely done for free if I gave the guy my car so we just traded our cars that same day, I couldn't believe that he did that and that I scored an almost brand new car that I loved even more and didn't have to pay a penny for it. Man, this video did bring me back to the good old times.
@davidsantos64383 жыл бұрын
I just gotta tip my hat off to you. You are a very talented individual. I wish i had the time to take on one of these projects but unfortunately with this covid and the fact i travel across 2 states to get to work i have no time for personal hobby other than fishing at times. Good stuff congrats on your success and hope you blow up the way you deserve.
@mouadannaki1125 Жыл бұрын
From morocco... respect !
@djboom30243 жыл бұрын
So stoked on what's coming 💚💚💚 maybe I'll dive back in the programming. I just have to get some ideas... 🙈
@timlascak36653 жыл бұрын
TY for posting. This has given me confidence on my future plans. Finally, technology is catching up to my visions. please keep posting this kind of stuff!
@Eagle69Biker3 жыл бұрын
Your lights look awesome! I'm an Army Veteran who became disabled after 2 motorcycle accidents! Have you done any for a 2014 Chrysler Town & Country? Sad that there are no custom lights for those of us forced to drive mobility vans... Wishing you all the best young man! Great videos!
@williamboyd90373 жыл бұрын
Damn dude!!! That looks sick. Are you self taught? Truly impressive Bro!!!
@flyryde3 жыл бұрын
Hey William, thanks dude. Just a fortified test dummy here 😬 I wish there were practical educational resources when I was learning all of this through trial and error. You either get full send Geeks that work for monster corporations as electrical engineers, or obscure craftsmen that know just enough to have an ego about it, and never share their “trade secrets” 🤦♂️. I learn more about all of this by sharing everything I know, and having that bounce back at me 10x from the hard work, questions, and insights from the community.
@do_italldayeveryday8203 жыл бұрын
I would love to build something like that for my car but need to learn how is a lot of work but I love it!
@zekeclark25942 жыл бұрын
Did you ever learn? Because I'm looking at this like it's impossible right now haha
@baezn883 жыл бұрын
That's why you're the man!!
@flyryde3 жыл бұрын
🙏
@EldeNova2 жыл бұрын
DUDE! You fuckin rock for uploading this. What a legend.
@SM3Dcreations3 жыл бұрын
2:00 i was wondering about the addressable leds and now i know :)
@fablighting78843 жыл бұрын
dude dont forget I wanna be a part of the treasure hunt you are international you have alot of subscribers in T&T and we dont wanna be left out
@peterorme5748 Жыл бұрын
Hi I'm doing some crazy bild on my van from a video you previously u wiv a controller you did video on and loving ever pec of inform you put up and it all very helpful .wich led did you us on thes tail light
@UDRElectronics3 жыл бұрын
Thank you so much for spreading your experience and knowledge through us man!! Many thanks from Romania!😁
@ezzatluqman2 жыл бұрын
Spot on mate! im trying to figure out how to built the sequential from scratch. Whats is needed? im using it for another wardrobe project for my little girl as birthday present. Not using for car lights tho. Can somebody help me out? p/s: i dont even know what program is on the computer and how to get them
@KielTV7772 жыл бұрын
I love to be in sequential squad love your video dude.
@kabircarchamp013 жыл бұрын
Great work sir
@aljones96963 жыл бұрын
First off great content. You mentioned in this video you would talk about factory LED circuits boards and how to bypass. Do you have a vid on this? I looked but may have missed.
@dannyarevalo47993 жыл бұрын
Hey Chris, I have a question, is it possible to connect strobe lights to brake lights and have them come on and stay on as long as you are pressing the brakes, without a controller?
@hcic87383 жыл бұрын
I'm moving from Philly to Cali TO-NIGHT!!! Lol J/k
@tyronebegay7023 жыл бұрын
So Kool man.. 👍👍 keep up the bad ass work..👊👊 Wowwww sick sick..😱
@mohamadwarith4014Ай бұрын
look nice the lights. can you customs for any car?
@TheAMFT Жыл бұрын
What LEDs do you use? I was MINDBLOWN when you said addressable LEDs aren’t bright enough. The array I’m designing for my taillight is 140 WS2812 and that’s a solid 700 lumen at full brightness. Standard taillights are going to be closer to 400. I think I would have been more concerned that if 1 burns out it will kill the rest. That’s why I switched to WS2813 which have a backup data line so you don’t kill the entire circuit with a break.
@Justin-ls1qk3 жыл бұрын
I look up to you thanks for the tips and tricks !
@wrkls_9 ай бұрын
Fxxk that guy! 😂 I love it. Definitely going to buy your course. I’m about as dumb as a rock when it comes to wiring, but I would really like to learn. lol
@Trinispeed02263 жыл бұрын
So If I’m not mistaken you said you can hook up an existing module (which is already been programmed) and export it? Please do a video on that if so PLEASE!!!
@shadoe1l02 жыл бұрын
Hi I'm living in the Caribbean and definitely don't have anyone like you who does these lights on cars, is there some way to get these different animations without opening the light it self?
@JamesCarmichaelArtist Жыл бұрын
If I have empty control spaces on my steering wheel could they be wired for control instead of having the fob?
@One-way3 жыл бұрын
EXCELLENT content and instruction !
@patato_queenlol75772 жыл бұрын
Can you make a 42 inch long double led strip sequential like a scanning (knight rider like) ?
@grahamlow23773 жыл бұрын
chris do u sell the hat pins because i live in oz,bi the way love your work,great as aways.
@MsFenix893 жыл бұрын
Could you please make a video on how to cut and reattach RGB morimoto Led strips.. I know you have a video on how to do it with switchbacks but I really want to know how to get this done on Rgbs...
@michellematthews70292 жыл бұрын
I’m trying to find something similar to my Pontiac g6 coupe but no one has done it yet I guess. Just wondering if it’s possible.
@unaismohamed21603 жыл бұрын
nice work bro
@harryslye1268 Жыл бұрын
Will the lightening bolt you make for the gtr work for the Alpha rex headlights for an infiniti g37 coupe? If not can they be manufactured as such versus that tube? Thanks for your input
@murrayphoto8193 жыл бұрын
Your videos are great along with your knowledge. Can you help me? I am looking to add a thin led strip (probably COB) for DRL and turn signals. Not primary but just for looks. The application will be on the front splitter of 2014 Corvette. The issue is I don’t want them to be too visible when lights are off. I would like to use a black or dark diffuser to blend in with the carbon fiber. Do you have any suggestions for this set up? I’m sure you do so I hope to hear back from you, it would be great.
@EndoftheRd3 жыл бұрын
hey I think I summited this same question, I bet you guys can do these but I haven't seen it ,in none of these videos . these lights from the Avalon as the light turns on goes of sequential . please do something like that.
@tylerlong1016 Жыл бұрын
What white/ amber LEDs are you using on the bolt board?
@kennethcox4115 Жыл бұрын
Hi, I'm new to your group, great to be here, I fabricated a air dam light system like the Recon set-up for the front of my 2001 f350 dually, but would love to make it sequential,with different options, any help or info would be greatly appreciated!!!
@custombracketsdesigns89833 жыл бұрын
Hi Bud 😁
@bigboy-ky3mx3 жыл бұрын
wish you were close to do my motorcycle
@ASharpProductions-Inc2 жыл бұрын
Hey there! Love the video. I am looking for a solution to put LED lighting on the OUTSIDE of my 17" Rims for my Jeep. Traditional LED strips are not flexible in the way I need.. which is to make them in a circle with the LEDs obviously facing outward. I am only using this for a Christmas Parade at very slow speed and would velcro them to my rims. I have a flat enough surface are 1" all the way around the rim to velcro. I would power them by 12V or 24V Lithium Battery / Holder that I can zip tie to my rim. Is there such a solution off the shelf or is it something that you can make?
@j3zzyrazo3742 жыл бұрын
Where are you located bro I need some work on my headlights I have a L bar Nad they are no brighters need more bright
@PaulJosephdeWerk3 жыл бұрын
Do you have a block diagram of how everything is hooked up?
@Whoorms Жыл бұрын
Hey I've got a question for whoever has gone this route and made custom lights, I'm interested in making my own taillights to save some money, (and in all honesty im not a huge fan of the aftermarket tail lights being sold for my car) would it make sense to spend money on all tools and parts for one or two projects, or would I be better going the route of just buying aftermarket tail lights?
@cmlilfry3 жыл бұрын
What you think of the Flow Series? Can you give your input on the Flow Series
@doctorscars2524 Жыл бұрын
Top parabéns pelo trabalho
@orlandolopez45393 жыл бұрын
Hi you no have any custom headlights for ford fiesta st 2017 i have already tail light i need hesdlights thank you
@flyryde3 жыл бұрын
I do not my friend.
@lukecane60803 жыл бұрын
Hey man I love your work, just out of curiosity would I need 1 controller per light to make something like this on another car?
@TheMilanMovies3 жыл бұрын
It depends on how many channels you want to have. The ghozt module has 28 channels individual channels. You could split the amount of LED’s you have into pairs and only use one module if you want. But if you have a lot of channels per light (like these GT-R taillights) you will have to use a module per light.
@restrictedsaint46033 жыл бұрын
I’m starting from stock lights on a 2012 Chevy Cruz. I need some dope sequential lights and I need the headlights to change colors. I need help 😭
@ch1potle3 жыл бұрын
So if I don't want to learn it and I'd rather just throw money at it can we talk about you building me some lights?
@wrkls_9 ай бұрын
Where’s the link to the controller? Could you please send me it or lead me in the right direction kind sir?
@tyronejason3 жыл бұрын
Is 1 ghozt module running everything or does each lamp have its own module
@9999manojkumar Жыл бұрын
What is the Indicator led model number
@christophermartinez1321 Жыл бұрын
How much u charge to build head lights and tail lights
@dvlautos10 ай бұрын
how fit Jaguar Type 03
@justinrolon46433 жыл бұрын
Question that remote acts as a switch now car battery wise ..draining non draining ..on show mode ..what bout bluetooth controllers that if people want to do show mode or any lighting with out turning their car that means that bluetooth controller will need to have constant power ..that's not good for a battery ..I would do a switch to cut the power when not in use
@flyryde3 жыл бұрын
There’s lots of solutions including timers, and programmers that will kill power to the accessories hooked up to it after a set voltage limit. Definitely nothing to worry about, as there’s tons of super affordable solutions 👍
@justinrolon46433 жыл бұрын
@@flyryde have a link to the product for that ..
@justinrolon46433 жыл бұрын
@@flyryde do u have a link or the name of the product that cuts the power .I am later going to hook up to 4 channel remote but regardless of that ..the product to not drain ur battery if ppl are hooking it up to battery for power
@alexisnarvaez313 жыл бұрын
I am from puerto rico
@jtbolivar82013 жыл бұрын
How much would something like this cost if I wanted to get it done?
@unaismohamed21603 жыл бұрын
big fan
@julianbreakseverything63973 жыл бұрын
How many ghost modules do you use?
@PaulPaid3 жыл бұрын
@5:22 What gauge wires are those?
@jamesbrooks77162 жыл бұрын
Iam so doped just hearing how dope you are so doped I had to find another channel to keep from me over doping on this over used high-school verbiage. It just takes the possible professional minded person wanting to get this information without the return to middle school again. I know your trying to show out for the age group these cars have driving them but if you think about this take this episode right and a link to watch this one here I bet they won't return or move on in frustration due to the cloud of immature like commentary. Think who's forking over the money or is going to try this not many 18 year Olds the educated well structured professional will stop the video and not return. I am not saying I have the answers I do have a very high interest in what you are showing but my friend I actually became aggregated the more I tried to see past it but it took my train of though completely away and at this point don't care to make this for my own car. Take it to the next level lose the kid like way of presenting this and I would be forced to tell my friends and clients to check out your videos give more structure on the visual showing the connections with cad drawn diagrams drop the filler words still have the laughs and you will sky rocket past anyone in your way. I'll check back throw me a message maybe allow me to speak of some ideas but always put yourself in the viewer's chair this is aggravating enough to have it work lose the clutter and have shit lined up with purpose in the video showing a 2 sec clip of a controller wired up and not going more in depth will cause another stop and look for another channel. My friend you have the tools this shit isn't a walk in the park I'm impressed what you did I know I couldn't figure it out make that 10 years of work you put into figuring this out to set you free . Good luck . I see great shit coming your way don't ruin it with this way of showing your skill at a lower pay grade hit me up let's talk. I had 2 major brain surges and I am 45 and now in hospice long story but one day I'm doing covert operations and the next without warning I'm about to die at 45 years old so I hope I made some sense in what I wrote it's easier to say it . I've lost my ability to read write and add I had to talk to text this s I hope it isn't filled with totally jacked up words can't check my texting can't read believe that shit all because I inhaled a dust spore on a job site and it's 7 years and I have a few months and that's it. If we don't speak I wish your channel the best but you really have something here if I sat here a went through he'll sending this it means something and I want to see more without the fluff . Take care nothing but good things here .
@soroushzaker4173 Жыл бұрын
👍
@armandchaput3 жыл бұрын
Would I need two ghozt controllers, one for each taillight. I want to build tails for a genesis coupe.
@garforce23 жыл бұрын
in most cases that is the suggested way to do it but here since there are 20 leds it is the only way. in short, yes you will need 2 ghozt modules
@oswaldoescribano96623 жыл бұрын
@@garforce2 it can also be programmed with corsomotion
@garforce23 жыл бұрын
@@oswaldoescribano9662 true but not as customizable and if someone is asking about ghozt I will send them down that rabbit hole, it’s also easier to find space for it since it’s smaller and can be put inside the light
@oswaldoescribano96623 жыл бұрын
@@garforce2 thank you very much for answering me greetings
@vincentpony64732 жыл бұрын
Brother can you train me??
@christophermartinez1321 Жыл бұрын
I’m so confused 😂
@ianfairbanks13182 жыл бұрын
Bruh...dope...vape...flat brim....bruh....
@bryanbsa80942 жыл бұрын
You do know that if the lighting on your vehicle is modified from DOT specs, your running illegal. If while running Illegal, you get into an accident, your automatically at fault... as in, you shouldn't have been on the road in the first place. Plus, you shouldn't modify lighting to distract other drivers. You could also be liable if your customers get into an accident.
@lmssoftware31302 жыл бұрын
Good luck enforcing that dude. You're automatically at fault if you make contact with a vehicle. The person who hits is it. No one gives a shit and he's not liable because he is a LLC or Limited Liability Company.
@bryanbsa80942 жыл бұрын
@@lmssoftware3130 If you have a vehicle that is not legal and on the road, you are automatically at fault. It shouldn't have been on the road in the first place, therefore said accident would not have occured.
@lmssoftware31302 жыл бұрын
@@bryanbsa8094 is that so? So lights automatically make it a lethal accident because a car rolled over the median and smashed into oncoming because someone T-boned it. Yeah sounds at fault to me. Stfu dude. Clearly you don't do this for a living.
@laulove47362 жыл бұрын
Hello ... man please stop saying controller controller... is to this is make this bat your ar not saying where you have bought this or how you make this .... .... make a video how you make the controller if not give as the url where you have bought.
@rugalxrystal Жыл бұрын
I really want to get this led light style in toyota wish 2004 headlight🥹is there any information!i'm from Myanmar🇲🇲