How to make a simple spline jig. Spline jig for tablesaw.

Рет қаралды 62,915

3 ай бұрын

Today I will be building a new spline jig for my table saw. Easy to make step by step explained. Every woodworker should have a spline jig in the shop #splinejig #woodworking #woodworkingprojects
IF YOU WOULD LIKE TO SUPPORT THE CHANNEL AND PURCHASE THIS BOX OR ANY OTHER STUFF THAT I MAKE YOU CAN DO THAT NOW HERE. www.skylerewing.store
========================================================
Affiliate Links
=========================================================
The links in my video description are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase
Router Table Spline Jig - Router Jigs and Templates for Small Boxes, Frames - Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot. amzn.to/4a1Jpn3

Пікірлер: 69

@peterstevens6555 17 күн бұрын

Kia Ora & Good Morning from Caribbean Drive, Unsworth Heights, North Shore, Auckland, New Zealand ... Another Great Video Bro.

@WedoweeHandyman 3 ай бұрын

I love it Skyler finds the woodpecker jig aka “klunky”

@aaronblackford981 3 ай бұрын

It’s not as if she doesn’t like peckers stuff. Everyone makes a bad tool or two. Some make more.

@woodworkingwithSkyler 3 ай бұрын

Hi Dennis, thank you. I haven’t sold anything yet. As you can imagine is hard to sell wooden things to woodworkers. They can make all of this themselves

@richkazebee9730 3 ай бұрын

I've been needing a spline jig for a while. I like this design that rides on the fence better than the one I was going to build that rides in the table slots.

@woodworkingwithSkyler 3 ай бұрын

I like that better too. Pluss you can move the fence over if want a wider slot

@dpmeyer4867 3 ай бұрын

cool, making one today

@jimmyjames3220 3 ай бұрын

When I need a spline jig, I'll be making this one for sure. Thanks Skyler! :)

@woodworkingwithSkyler 3 ай бұрын

You are very welcome

@papillonwoodprint 3 ай бұрын

Thankyou for the video! ill try to do it by myself too

@budm9982 3 ай бұрын

Skyler, you are an excellent tutor. I really appreciate the time you take to teach these techniques for taking my woodworking to a higher level. You are very talented and knowledgeable. All while looking so pretty as you do it, too. Wonderful!

@woodworkingwithSkyler 3 ай бұрын

:) thank you for your kind comment

@paulmaryon9088 3 ай бұрын

A great video and superb jig, thank you so much. Stay lucky

@user-ug9mi8kx4v 3 ай бұрын

Thanks for the video, very helpful.

@woodworkingwithSkyler 3 ай бұрын

Glad it was helpful!

@flashwashington2735 3 ай бұрын

Thanks teach. Precise and methodical. Good presentation and engaging thanks.

@kandiecandelaria3134 3 ай бұрын

Thank you for sharing! Glad I found your channel!

@mrmanu20121 3 ай бұрын

Great job thank you ❤

@mrturnbull9504 3 ай бұрын

My favourite videos are the ones you make in the winter! Thank you for perking up my day! 😁

@dannywilsher4165 3 ай бұрын

I'm happy with it!!!

@jeanchance9334 3 ай бұрын

Simple! I like it! I will use this jig making video

@dian3145 3 ай бұрын

Great tutorial and repurposing old jigs! Simple and effective construction.

@woodworkingwithSkyler 3 ай бұрын

Thanks

@user-hd4fe2zp1o 3 ай бұрын

Good job. I'm going to make one now

@user-ts6vx7bb5p 3 ай бұрын

Excellent video

@user-ce7on9ts9t 3 ай бұрын

Simple et efficace !

@dominiquechuillet1349 3 ай бұрын

bonjours, je me suis abonné de France , super vidéo

@flakk1989 3 ай бұрын

Needed one a little while back. I guess I'll be making one somewhat like yours just in case I need it later on. It's simple and quick. Thanks for another great video. Keep them up!

@woodworkingwithSkyler 3 ай бұрын

You are welcome

@RoyWCanada 3 ай бұрын

Hi Skyler, that was nice jig for spline cutting on the table saw. Good explanation and demonstration. Thanks for the video looking forward to the next one.⭐⭐⭐⭐⭐

@woodworkingwithSkyler 3 ай бұрын

Thank you Roy

@garychaiken808 3 ай бұрын

Great job. Thank you 😊

@woodworkingwithSkyler 3 ай бұрын

Thanks for watching!

@williamkilpatrick101 3 ай бұрын

Great video and something worth making. Thanks.

@woodworkingwithSkyler 3 ай бұрын

Glad you enjoyed it!

@zentherewasone 3 ай бұрын

Beautiful looking merchandise in your store. Keep it up, few of us can make boxes of that quality 😊

@woodworkingwithSkyler 3 ай бұрын

Thank you

@dtork47 3 ай бұрын

Great ideas, I need one! Stay safe.

@woodworkingwithSkyler 3 ай бұрын

Glad it was helpful

@markwallack8167 3 ай бұрын

EXCELLENT DESIGN AND VIDEO....THANKS.

@woodworkingwithSkyler 3 ай бұрын

Thank you

@michaelsweet8327 3 ай бұрын

Great video! Ihave a small fence with a flip up piece, any ideas on how to make the sliding piece for that style?

@scottmedori1437 3 ай бұрын

Very nice, simple, well thought out jig. Love the new website. Your prices seem very reasonable. Best of luck with it

@woodworkingwithSkyler 3 ай бұрын

Thank you very much!

@JohnSmith-xs4sx 3 ай бұрын

nice jig , simple and effective , you can tilt the blade for angled splines as well. Had to face plant when i saw your masking tape ....you would not believe how many decades i've gone without such a useful tool....thousands of miles of tape...im an idiot LOL

@woodworkingwithSkyler 3 ай бұрын

@dennishall9260 3 ай бұрын

Hi Miss Sky! Great little jig.. I also checked out your store and was very impressed. Have you sold much yet? Thanks for sharing!

@woodworkingwithSkyler 3 ай бұрын

Hi Dennis, no so far nothing. As you would imagine, its hard to sell wood things to woodworkers. No one else knows I have a website other then you guys

@cristy1735 3 ай бұрын

Oh and thank you!

@woodrowsmith3400 3 ай бұрын

While I may use glue on subassemblies, I never glue main frame components. I prefer to do things like having t-nuts or threaded inserts on my main fence straddle, and add specialized jigs as required. I also do not glue my 'straddle' as I feel like I have some adjustment if required. I'm not saying this is a bad idea. I'm just saying I do it differently. This is the magic of wood working. There are any number of ways to solve a problem. Every one that works is the right way for you.

@danieldulany4879 3 ай бұрын

Do you have a jig to make the pyramid top lid that I see you put on your box? Your work is beautiful.

@woodworkingwithSkyler 3 ай бұрын

No, but I can make one

@danieldulany4879 3 ай бұрын

@@woodworkingwithSkyler That would be great. I'll keep watching for it. Thank you

@jimthesoundman8641 3 ай бұрын

Since you grew up using metric, does it bother you to use imperial? Which do you think is easier to use?

@woodworkingwithSkyler 3 ай бұрын

I like metric but forcing myself to use imperial

@GroundedFlyboy737 3 ай бұрын

Hey Skyler, I'm making a similar jig as we speak. The only difference is I want mine to serve 2 purposes. First, I made the box around my table fence and then attached a vertical piece to it on the blade side to use when making rabbets, grooves, tenons, dados, etc on smaller pieces of end or edge grain. Second, instead of gluing and screwing the piece with your 45 guide boards on it, I want to be able to attach/detach this piece so it's on only when making splines. Does that make sense? It's basically 2 jigs in one. Your method made both as well, except you can't separate the spline part when you need to make a tenon/rabbet so you need an additional jig. Had you not glued/screwed that last piece, any idea on how you could make that removable and maintain the accuracy?

@woodworkingwithSkyler 3 ай бұрын

Use threaded inserts?

@GroundedFlyboy737 3 ай бұрын

That's what I'm going to try, I'm working on it today, thx.