Hey Joe ... Couldn't resist 🙄 I love that 'housekeeping' tip 'RETIRED'. 👍

As always, an excellent help resource, Joe! One thing about updating existing templates to keep in mind. I learned I liked certain processor chains while working on a song. However, when I go to save the updated template by replacing existing with the newly added processors, the song data gets attached as well. Persons needs to make the distinction in its coding to know that if I am choosing to update my existing template by saving the newly added changes, it should not also include the song files themselves. It should ONLY contain the non-song add updates to the new template. Hence, the term "Template" and not, "Song". Thanks and Cheers Joe for another great tutorial!

That’s great Joe…I’m so glad I kicked PT to the curb. I want to spend my time making music! Really appreciate your videos!

Thanks Joe. You showed this in at least one other video but I wasn't ready to use it then. I appreciate both the reminder and the easy walk-through steps.

love this!!! I just sat down and did this the other day. Made a template with all the standard stuff I use ready to go. I've also been using your "console style" workflow, just a FAT channel on each track and the master bus, and using those vintage EQ's and Tube comps. And the mixes have been sounding amazing! Thanks for all the great tips Joe!

I love it! Studio One is really for everyday use. Thanx for your videos.

Thanx Joe, I was using templates for a minute in version 4 ut I never really stuck with it because I guess I was evolving in not only just Studio One, but mainly the way I write and produce. However.... Now after watching this I have gone and setup a basic template for all the task I normally do such as using Scaler 2 and my arrangement & I setup my fade out @ the end of the song as well as have my Drum Bus already setup with my favorite two plugins on it that I use on every Drum Bus. I had already setup a template for when I write Trap music because there are certain instruments I use with patches I use on most of my Trap trax. Now I've updated that template to have my mix page already setup like I've done with my main template. Thanx so much for this video Joe.... You're the best! -BiG Pluck

This video was very helpful! Keep the content coming!!!

This is really helpful. Thank you Joe!

Thanks Again Joe! Really useful info to help with my workflow!

You are awesome Joe!! Thank you!

Video well done ... solid content and great presentation!!

Hi, thank you for best advicesss. THANX from Italy

Very helpful video. Thank you !

Another amazing vid, Joe. Thanks. I got it!!!

Great stuff Joe even though I know how to use this since I've lost your first video and downloaded your first template it may the workflow so much neater and pretty thank you for all your education I watch all of your videos this is the first comment I left you but I've been using studio One now for going on three years and I'm so happy that I started using it and now I also have my guitar S2 with 800 mi away who collaborates with me and he is also now a sphere remember and I'm trying to get the other guys in the group to do the same since all of us live in different states thanks again

Great stuff and time saver, thanks :)

Thank you very much Joe!

Thanks, Joe from Presonus. That was awesomesauce.

i just asked myself these same questions on how would i save myself some time, i just know its a way i could preset these settings, this whole time all i had to do was save as template. nice.

I don't know why I haven't done this before..lol Thanks Joe! 😀👍

already kno this... but still enjoy watching these videos.

thank you!

Thanks

Bro! I've been looking for this content! I have a faderport, but I didn't want to remap my controls everytime. Thanks!

I use an orchestral template and merge my files from Notion into it. works great but frustrates me that my rehearsal marks in Notion don't become markers in S1. If I do the bounce as a new document (not the template) the markers match the rehearsal marks.

Good video Joe. But please tell your friends at PreSonus to develop Track Templates similar to how Cakewalk does it. I love so many things S1 does but I really love that feature in Cakewalk. It allows you to pull in multi-track instruments with the outputs and tracks and even instrument assignments set up, as with Kontakt, Superior Drummer, Sample Tank, etc. We can partially do this with S1 song templates but that only works if you know in advance which instruments you will use.

Hey Joe. Thanks for the good info. Question for you. I've been using S1 Pro since version 2 almost exclusively for mixing. As a result I have various templates based upon channel strips (Shoeps, Neve, SSL, API, PreSonus, etc.). That's all and well for songs, but the next step is mastering and now with the ability to do some automation in a Project, that is where I do my mastering. I would bet you have particular chains you use when and if you master. Is there a way to templatize a Project similar to a song? I like to set my metering and display type to a particular style as well. I cannot see a way of creating a project template. Do you know of a way? I do have mastering chains saved in my insert lists, but that is just not the same. And that brings up another point. I like to keep my song, project and track files in alternate places than the general user data locale, but because S1 includes all of the support folders like templates, presets, sound sets, etc. which I feel are more global settings than are locations for song, project and show files. If I want to change my defaults for songs, projects and show files, everything else is lost when you do that. How do you feel about a bit more granularity in defining where folders are pointing?

Thanks Joe. How do you send a template? I looked at the Templates folder in Studio One and there are different types of files.

Thanks for the great video, Joe. I just switched from Cubase, and I'm trying to lean the best method to bring my existing projects into Studio One. Do I need to drag in WAV files project by project? Are there any videos you can recommend to learn this? Thanks again for your awesome videos.

In your template, why do you have FatChannels on the buses and on the Master, instead of just using MixFX? Is it for having different settings on the Master and Buses?

Hi , I would like to know how to save sesión without save the audio .?

I can save a song as a template. But why do I have to remove all the events and automation manually? You can duplicate a track with or without contents. Why not the same thing when saving a template, Presonus?

OK Joe - but how about a template to import a Capture Session?? Using a 32S - so channels are already named ??

This is very good. Could you explain how to set up irregular time signatures with different accent's. I saw that in Cubase and hope SOne has that to,as I can't work it out myself.

Thanks, always was wondering how to save template changes without creating new one, but there is that -Replace existing- that my eyes just didn`t see all the time :))) 😂

Hi Joe, I was wondering how do you delete a template you don't want. Can you make a video on that please.

What A Template Means To Me A short story by Jeff Clark Ever been hungry for a peanut butter and jelly sandwich but you dread the thought of going out into the kitchen and taking out the peanut butter from the closet, then the jelly from the refrigerator, finding the bread, getting a plate, getting a knife, and napkins? Yeah I hate it too. Now imagine walking out into the kitchen and finding everything you need right on the table and the only blank space is the plate. That's what a template means to me. The End. 😁

Can you access templates while you are already in a session so you can build your tracks from drum templates etc?

How do you get rid of all the audio connected to the song that you used when creating the template?

Can these templates be transferable between pc and mac users?

hello can i found a free template for orchestral compose for studio one?

How do you delete unused Templates?

nothing like a blank page! got plenty of 'em!

I tried making an orchestral template for film scoring with all tracks disables and every-time I saved it, it took like 15 seconds. Not ideal since I save almost every step I do.

Studio One is a great DAW ! But the most static DAW I know when it goes about dynamic humanize, groove, velocity etc. Every DAW I used has dynamic real-time features for MIDI. The King is with no doubt, Reason with the ReGroove tool, it's just perfect. Maybe Studio One 7 has finally a Note FX tool which comes close to ReGroove.

how to replace the DEFAULT template?

Hi bro! Add next time costomisation for browser. Text may be larger

S1 kinda sucks for making templates with Instrument tracks. You can’t have a blank instrument track *AND* a blank Mixer Channel for it. No pre-configuring instrument routing, bussing, insert effects, etc. as shown in this video like you can for audio tracks/channels that you can then quickly drag a virtual instrument into. Studio One 6.5 effectively does not support creating blank instrument templates.

Thank You!! Thank You, Thank You!

it would be great if one could select what to make part of the template (tracks, busses, fx tracks, plugins, waves, midi, ...). Just like in Adobe Lightroom when you copy the modifications of an image. The reason why I would like to see this feature is simple. Usually I get the improvements for my templates when I use them. But so now at some point in time in the middle of my process I decide I would like to have this change in my template. Means today I have to create a new song based on the template, repeat the changes, overwrite template. But if you could select which things shall be part of the template, then I could simply deselect the waves and midi objects and maybe plugins, and overwrite my template directly from the song I'm working on.

How to share a template to be used on another computer

Sorry but 5 clicks to update an existing template is not exactly user friendly. I can get angry about it every day!!! And there is also unfortunately no way to change this via macro! There is no menu command: "Save current template". Then you could overwrite the currently used template with one click (or shortcut).

So much frustrating misinformation in this video from the perspective of an angry Presonus customer. You bet WRONG on AVB initially convinced us of your BS pitch. It's not a practical standard like WiFi. If it was practical, AVB would be everywhere and actually cheap, but it's NOT.

SOO Helpful