How To Make Cabinet Doors - Super Simple -

Рет қаралды 23,326

Жыл бұрын

Making Cabinet doors can be super easy and very cheap! I'll be showing you step by step how to I built this Shaker Cabinet door with just plywood and common 1x4's.
I try to respond to all comments so feel free to reach out :)
Have a great one!
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for Supporting me!
Products I Like
Dewalt Table Saw
amzn.to/3us5zQ0
6” Clamps
amzn.to/3w8mXd8
24” Clamps
amzn.to/49uba7u
Titebond 2 Glue
amzn.to/498138x
Titebond 3 Glue
amzn.to/3HTR6iR
Milwaukee Hammer Drill
amzn.to/4bu5SdU
Rigid Planer 13”
amzn.to/49sPsAz
Milwaukee Cordless Router
amzn.to/499qNRZ
Milwaukee 18 Gauge Brad Nailer
amzn.to/48ZoZLb
Equipment for Filming
RODE Wireless Go 2
amzn.to/3OBZ1p1
Canon EOS M50 Mark 2
amzn.to/49sV0Ll
Raleno Softbox Lighting
amzn.to/4858Hz6

Пікірлер: 13

@DrewLarsenDesigns Жыл бұрын

Want to see how I built a workbench with only two tools!? Check it out --> HOW TO BUILD A SIMPLE WORKBENCH kzfaq.info/get/bejne/sJN3rcyYpp-ufp8.html

@davidboston4574 3 ай бұрын

Awesome video, you scaring me having long sleeve near that blade

@Tamytutu81 9 ай бұрын

You did a awesome job!! Thank you for this video!!

@DrewLarsenDesigns 9 ай бұрын

I appreciate you taking the time to watch!

@kevinmcsweeney6560 Жыл бұрын

Check out rail and style router bits.

@DrewLarsenDesigns Жыл бұрын

They would make it so much faster and easier!! I don’t have a router table yet so the bits might be worthless until I get one 😂. Hopefully as the channel grows and so do I, I’ll be able to publish a better “how to” video using the bits 😊

@davidriblet9300 2 ай бұрын

so the last cross piece didn't get the tab cut to slide into the uprights???

@davidcurtis5398 Жыл бұрын

Panel looks a bit tight and you don't fit the rails into the panel. You fit the panel into the rails...if you can't slide the plywood in the grove, your grove is to tight. Make rails and styles to fit the door opening and then cut the insert panel to fit. Groove on rails and styles can be the same depth and width. Why complicate things like you did??? Cut the styles to length right the first time. Again, the plywood panel is to tight... Cut both styles at the same time. I know that plywood doesn't expand and contract like solid wood will but you should never use that much glue in the slot of the second style. And before you send me a reaction to this, I have been doing this same thing for over 60 years and have had no problems making a living and have had no call backs for doors that came apart or didn't fit after several years.

@DrewLarsenDesigns Жыл бұрын

Thanks for the input David! I really do appreciate it. I just started woodworking this year as a hobby and have loved it so far! The main reason I started this Chanel a month ago was to hopefully be able to look back at where I started and see the improvement over time. And thats what I love about posting on KZfaq, there are a lot of people out there with amazing skills that I can learn from! The way you typed this out was a great way to explain a better way to get the job done and I’m excited to keep growing and learning. Thanks for the tips and advice!

@davidcurtis5398 Жыл бұрын

@@DrewLarsenDesigns Normally you don't put any glue on the panel as it needs to float. I usually put a dab i the top and bottom rail to keep the panel in place. The wood will expand most from side to side. You made the door less strong when you cut off some of the tongue and didn't have any on the bottom. Also, tape is not enough to hold the parts. You needed to clamp the doors.

@DrewLarsenDesigns Жыл бұрын

That makes sense. If you have any other tips in the future I’d be happy to hear them. Thanks again 😊

@sajidrafique375 5 ай бұрын

what wood is your 1X4 ? Poplar is expensive . !!

@DrewLarsenDesigns 5 ай бұрын

If the door is going to be painted I use poplar or maple. If it’s going to be in a high traffic area (like a kitchen) I lean towards maple because it is a harder wood, and is harder to dent.