How To Make Doors [Woodworking Projects]

Рет қаралды 2,383

Ай бұрын

Often Mentioned Links:
How To Make Drawers and Use Drawer Slides :
• Woodworking Projects :...
How To Steam Bend Wood :
• Beginner's Guide To Wo...
Router Mortising Jig - Bench Top Mount:
Part 1 : • How To Make A Mortisin...
Part 2 : • How To Make A Mortisin...
Router Mortising Jig - Portable
• How To Make A Mortisin...
How To Mill Lumber Without A Jointer :
• How To Mill lumber Wit...
Milling Lumber For Beginners:
• Beginners Guide to Buy...
How To BreadBoard Ends :
• When To Use Breadboard...
How To Edge Grain Butcher Block Tops :
• How To Make DIY Butche...
How To Install Overlay Doors :
• How To Make and Mount ...
How To Install Partial Inset Doors :
• How To Make And Instal...
How To Install Inset Doors :
• Woodworking : Make And...
Find Me Here:
Website: www.honeybadgerwoodworks.com
Facebook: / honeybadgerwoodworks1
Pinterest: / honeybadgerwood
ETSY: www.etsy.com/shop/HoneyBadger...
Instagram: / honeybadgerwoodworks

Пікірлер: 42

@hefalump56 Ай бұрын

Thank you Caitlin for showing us how to work with complex profiles safely on a router table and table saw. Your tips and guidance really are a great help with my projects.

@benjaqsonworkshop9974 15 күн бұрын

Great to see how you work and order your stages. I'm so glad you showed the drill bits skipping - I've often thought it was my bad aim even with brad points but nice to see it's a common problem. Thanks for sharing your work HB.

@norm5785 Ай бұрын

Nice production. I had never heard about the Titebond glue doing that either. Always a learning experience is available. Thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.

@neilpemberton4652 24 күн бұрын

Loving this series! Great results with limited tools. Inspiring.

@HoneyBadgerWoodWorks 23 күн бұрын

Thanks!

@KarlBunker Ай бұрын

Man, this is some complicated sh*t. I'm really impressed that you had the gonads to tackle this project and the mad skills to pull it off so perfectly.

@HoneyBadgerWoodWorks Ай бұрын

I have made door panels like this before, so I knew going into it what to expect. But, I agree of all the woodworking tasks I've done this is easily one of the longer and most involved processes.

@FODman51 Ай бұрын

Extremely impressed with all of the thought that had to go into this. Very nice.

@HoneyBadgerWoodWorks Ай бұрын

Thanks!

@felix8102 Ай бұрын

Nice job, nice explanations, please keep posting the good woodworking.

@thomasnourse7506 Ай бұрын

Coming along nicely! Thanks for the tip on TB3. Didn’t know that

@HoneyBadgerWoodWorks Ай бұрын

It was news to me as well. I had a gut drop moment after reading that trying to rack my brain about all the exterior projects I've done, and what direction in the sun's path they are facing.

@cabman86 Ай бұрын

Wow! You are such an artist!

@HoneyBadgerWoodWorks Ай бұрын

Thanks!

@user-wg7dx7er8w Ай бұрын

Hi HB, as per usual, well done, this brings back memories, Since I’ve started making doors and windows long these similar lines, I was very lucky as I had some serious projects , I think you might like my machinery that is sitting in my basement, Wadkin EKA , though this machine is very old when I purchased it around 20 years ago, I stripped it and had it rebuilt with new bearings et cetera in the motors, I picked the machine up for £1000, but it cost another 4 to £5000 by the time I had rebuilt it and brought all the new modern to for it, Leitz , Then the tooling set to go onto the spindle mould/profile machine, of course, nowadays, if you are in mass production work, most of this work is now done on the CNC machine, keep up the great work. Stay safe.,

@HoneyBadgerWoodWorks Ай бұрын

The setups I have seen for people that make doors and windows is pretty impressive.

@user-wg7dx7er8w Ай бұрын

@@HoneyBadgerWoodWorks I have been very lucky with my work over the years, but not very good with my ex female partner as she had scammed me, back the early 2000s, I was lacking on space for my workshop, I could not build a workshop on the premises that we owned, so I ended up renting a property and old farm building on a massive farm complex, the downside was it was about 11 miles away from where, I did end up doing five bar conversions plus a load of renovation work for the farm , this is the main reason why I bought some very expensive equipment, a lot of it paid for itself within two or three months, some of the biggest equipment probably took a year or so to recoup the money, but well worth it in the end, Good luck with yours look forward to the next stage of your door project,

@user-wg7dx7er8w Ай бұрын

@@HoneyBadgerWoodWorks Hi HB , I have found the new machine for your work shop, but you have extended slightly, SCM Accord 600 , 😂.

@guyvangenechten6484 Ай бұрын

Very nice work as always looking very nice!!!👍👌💯

@HoneyBadgerWoodWorks Ай бұрын

Thanks.

@xoxo2008oxox Ай бұрын

Nice results. Gotta admit, a shaper and mortiser would do you well.

@HoneyBadgerWoodWorks Ай бұрын

I have a mortiser. I sometimes just like to show that some tasks can be accomplished without expensive tools. Hence why I choose to use a drill to make mortises. A shaper would be a time saver for this project, but I have no plans to get into the door making business, and wouldn't have much use for it after that. Realistically speaking I barely even use my router table with the work I get. This is a barter build, so it doesn't have a set timeline. I am able to work on it in bits and pieces, so if some tasks took a little longer it didn't really matter on my end for this one.

@btrswt35 Ай бұрын

A little steel wool would get that rusty router but shining

@2old4u Ай бұрын

Excellent.

@grahamparsons6620 Ай бұрын

I am sure this video will be an eye opener to some people as it shows just how much work goes into making a set of doors, they are turning out great and will look fantastic, had no idea about heat and Titebond 3 which is something think about as I use it a lot because of the extended open time due to the heat we have here a lot if the year 👌👌👌👍👍👍🇦🇺

@HoneyBadgerWoodWorks Ай бұрын

The Titebond issue was news to me as well. French doors like this are hands down one of the more involved and harder things I’ve made. Especially start to finish with weather stripping, install, hardware etc etc.

@petedazer3381 Ай бұрын

Extraordinary work! As usual!

@HoneyBadgerWoodWorks Ай бұрын

Thanks!

@georgewilmore7599 Ай бұрын

Excellent work! I’ve made windows so I know how hard it is to get the setup right.

@larry78cj7 Ай бұрын

Well done!

@scottmcfarland1177 Ай бұрын

The cost of the bit is minimal compared to the extra effort and time required for the extr work and once you have it you will sure as hell use it again! I bought a 3/8 cmt bit online for 15 bucks well worth it to get a job done! Looking good! Just remember unless it's a by the hour job theore time cuts into your profit! Time is money and that's the only thing you have! I love it when people say you can't count all your time! Nice job!

@HoneyBadgerWoodWorks Ай бұрын

I was going to buy another bit. But, I could not find this profile in a coping bit. This is a barter build, so tracking time isn't an issue on this one. I work on it in bits and pieces in-between my customer projects.

@69kaveman Ай бұрын

Great work!

@jimthesoundman8641 Ай бұрын

Small bottles of JB Weld two part epoxy is in every Home Depot.

@HoneyBadgerWoodWorks Ай бұрын

I don’t care for JB weld epoxy, I prefer DAP. And that’s five minute epoxy. I needed a long open time on the epoxy so I have enough time to align all my pieces and get them clamped. Also, with the amount I need to glue the doors together it would have been more expensive to buy small bottles. Once it’s all said I done I will have used 3/4 of that kit.

@draztiqmeshaz6226 Ай бұрын

Amazeballs

@HoneyBadgerWoodWorks Ай бұрын

hahahaha. Thanks!

@michaelcima5772 Ай бұрын

Wow. Super tricky build. I wonder if doing the muts first and then do the rails and stiles might be slightly easier. I say that because dialing in the correct length on the muts is tough because of the complicated profiles on the ends. Seems like it’s easier to dial in the length of rails and stiles to fit the muts. Just a thought.

@HoneyBadgerWoodWorks Ай бұрын

I think order of operations most times is personal preference in woodworking. But, I personally have never seen someone build a door from the inside out. I think doing the mutts first would present a whole other set of math and dimensioning to deal with.