How To Make Glass Cabinet Doors with Router Bits // Home Bar Pt. 3

No video

How To Make Glass Cabinet Doors with Router Bits // Home Bar Pt. 3

Рет қаралды 208,856

Күн бұрын

Learn how to make custom glass cabinet doors using a router bit set! This is a great DIY cabinet door option If you buy pre-milled wood. Thanks to Powermatic for sponsoring this video, check out their awesome power tools here : bit.ly/powermat...
📦 Materials Used On The Glass Cabinet Doors (affiliate):
🔹 Rockler Zip Driver Screws (to attach filler strips) : www.rockler.co...
4/4 White Oak : bit.ly/ashevill...
Wood Glue : amzn.to/31YGgky
Pin Nails : amzn.to/2HfbkF1
Enduro Black Poly, Satin : amzn.to/2ZkARTx
Blum Soft Close Hinges : www.rockler.co...
Edge Pulls : amzn.to/2MJInEy
⅛” Tempered Glass (custom cut locally)
🛠 Tools Used On The Glass Cabinet Doors (affiliate):
🔸 Powermatic 209HH Planer : bit.ly/209HH
🔸 Powermatic PJ-882HH Jointer : bit.ly/PJ882HH
🔸 Powermatic PM2244 Drum Sander : bit.ly/Powermat...
🔹 Rockler Hinge Mounting Plate Jig : amzn.to/2YuDfeK
🔺 Infinity Tools Glass Door Making Router Bit Sit : bit.ly/routerbi...
Table Saw : amzn.to/2WrrNMm
Push Stick : amzn.to/2XIvgFq
Miter Saw : amzn.to/2TeGdgO
Speed Square : amzn.to/2XMF5CE
Magnetic Screw Holder (for my impact driver) : amzn.to/2xGYPwD
Cordless Drill : amzn.to/2wOFM2S
Sander : amzn.to/2oHOmg7
Sanding Block : amzn.to/2HkX9OG
Pin Nailer : amzn.to/2NpDBfV
👕 Get your Build It Yourself merch! bit.ly/BuildItY...
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 SUPPORT ME : / @craftedworkshop
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop

Пікірлер: 148

@craftedworkshop 5 жыл бұрын

Hope you guys enjoyed part 3 of the home bar build series! Check out the playlist if you missed the other parts : kzfaq.info/get/bejne/fbunh7SDr7Cbm3U.html // Get subscribed so you don't missed part 4 next week : kzfaq.info?q=https%3A%2F%2Fgoo.gl%2FV5gcNJ&v=w81KNAwthQc&redir_token=lzFmDYFG7DK5l3O261--nci-TjZ8MTU2NjU4NTA0OEAxNTY2NDk4NjQ4&event=video_description

@alansimpson596 5 жыл бұрын

Great project and bar. Just one complaint. I live in Ireland and didn't see any Irish whiskey in your stock :-).

@craftedworkshop 5 жыл бұрын

Thanks! And you must have missed it, just got back from Ireland and brought a few bottles with me. Up on the top shelf with the scotch :)

@bigrigmtber857 5 жыл бұрын

That 3 piece router bit set is awesome! I like how they have made 1 bit to do a few different cuts on the same pass. Saves a lot of time and bit challenging. Nice job on the doors. You always make this look so easy as I know it’s not.

@craftedworkshop 5 жыл бұрын

Thanks! It’s a super cool bit set for sure.

@travistaylor6110 4 жыл бұрын

I've been subbed to your channel for a while now and I've always loved it! May I make one suggestion though? Could you incorporate definitions for certain terms in your videos? Like a pop up banner with a term and definition for a few seconds, and it goes away. For things like "planer snipe" and "glazing strip"? Just asking for those of who aren't carpenters. Thanks and again, I love the videos!🤙

@tlanc1283 2 жыл бұрын

If only I had a planer...your shop is a woodworker's dream!

@surfinturfer 2 жыл бұрын

Your "by the way" tips are GOLD! Very helpful, like the backing board on the router. Newbies like me need to know these things and so many guys seem to take what they are doing for granted without bringing up these tidbits. Thanks, man. [SUBSCRIBED.]

@craftedworkshop 2 жыл бұрын

Glad they’re helpful!

@BoomerKeith1 5 жыл бұрын

Really diggin' the bit set used. Man, talk about being efficient! Awesome work as always Johnny!

@craftedworkshop 5 жыл бұрын

Thanks Keith!

@joeymerrell8585 5 жыл бұрын

I've enjoyed this build. When I do cabinets I know will have under cab lighting, I try to get a light to cut a flush panel on the underside, just for that extra step that sets me apart from anyone else. Keep up the good work

@craftedworkshop 5 жыл бұрын

Thanks, good tip!

@ChrisSummers Жыл бұрын

I discovered this video after purchasing the Infinity router bit set, in fact I got the same one as shown here for a Shaker style profile. The video is super helpful. I do not have a drum sander so I am thinking that if I want to remove a bit more from the underside of the 1/4 round based on glass thickness I could do that with the slot cutting bit, I would first use it to remove a bit more wood, then reset the height and fence for the side cut to remove the 1/4 round.

@thatguythatdoesstuff7448 5 жыл бұрын

I dig this project Johnny. Absolutely love the dark finish/glass combo. It looks so classy. $150 for that bit set is super reasonable. I figured Infinity + specialized bit set = $300+

@dt2419 5 жыл бұрын

Krazy fucker how unfortunate for us

@xxxdroidmonkeyxxx 5 жыл бұрын

Wow, the bar is really coming together nicely. Those glass doors look great! Can't wait to see what the countertop will look like.

@craftedworkshop 5 жыл бұрын

Thanks a lot!

@kylecroft5807 5 жыл бұрын

Johnny don’t see any Irish whiskey there unless your hiding it at the back👌🇮🇪🇮🇪🇮🇪🇮🇪🇮🇪

@craftedworkshop 5 жыл бұрын

Up top with the scotch!

@debybrooke157 5 жыл бұрын

Wow. Those doors really finish it off. Can’t wait to see the countertop. Nice job!!

@craftedworkshop 5 жыл бұрын

Thanks mama!

@kaelanschmidt494 5 жыл бұрын

Awesome selection of whiskey and scotch 🤘

@craftedworkshop 5 жыл бұрын

Thanks!

@diycentral 4 жыл бұрын

The doors really complete the look on the uppers... big time!

@TheNajSD 5 жыл бұрын

I really like the work you did and the fact that everything is sourced in the description. Subbed and all that good stuff.

@kocbilo 5 жыл бұрын

Frosted glass panels will look great on the bottoms of the top cabinets.

@JTWoodworks 5 жыл бұрын

I'm really loving how this is coming out. Looking forward to part 4

@craftedworkshop 5 жыл бұрын

Thanks man!

@davidgrider3084 3 жыл бұрын

really like the black poly look

@naliniganju2326 4 жыл бұрын

Very meticulous. Really appreciate your workmanship.

@timkozak6106 5 жыл бұрын

Looks awesome! Can't wait for my invite to the bar opening!👍

@craftedworkshop 5 жыл бұрын

Thanks!

@wb_finewoodworking 5 жыл бұрын

I’ve been wondering about that router bit set. Seeing it in action on your build really helped. Thanks.

@craftedworkshop 5 жыл бұрын

Glad it helped! It's a great set, plan to make some picture frames with it as well.

@christofix 5 жыл бұрын

That proces was fun to watch ,Johny. You have a lot of great machines in your shop there. Nice work man!

@craftedworkshop 5 жыл бұрын

Thanks a lot!

@raspberrycrusader 4 жыл бұрын

Well, I don’t know about anyone else, but I went green with envy when I spied the beautiful, huge workshop kitted out with both machinery AND custom cabinetry 😋 Workshop porn!

@craftedworkshop 4 жыл бұрын

Hah, thanks!

@theransonshome 2 жыл бұрын

Wow those are stunning 😳

@CWWheeler 3 жыл бұрын

How wide are your rails and stiles?

@CarlosRodriguez-vg2ob 3 жыл бұрын

looks great i do have a question tho, because glass is so expensive what are your thoughts on using clear 1/4 Plexiglas/ acrylics in the doors, do you think it would be too noticeable?

@pedalman4595 5 жыл бұрын

BEAUTIFUL WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!

@craftedworkshop 5 жыл бұрын

Thank you!

@TheTranq 5 жыл бұрын

Nice work Johnny. Very cool router bit set

@craftedworkshop 5 жыл бұрын

Thanks!

@SeanFoushee 5 жыл бұрын

Fantastic work! Those are beautiful cabinets for a great looking collection, and it's certainly inspiration for when I finally get around to doing our kitchen renovation. Cheers!

@craftedworkshop 5 жыл бұрын

Thanks man! I think we might should do some sample swaps, brought some cool stuff back from Scotland 😊

@SeanFoushee 5 жыл бұрын

Crafted Workshop definitely! I have some Texas Brandy we’ve been maturing that is amazing, along with a few other “secret” projects that I know you’d like. I’ll send you a DM on IG later.

@FredMcIntyre 5 жыл бұрын

Awesome work Johnny, the doors look amazing! 😍👌🏻👍🏻👊🏻

@craftedworkshop 5 жыл бұрын

Thanks Fred!

@yanagild 2 жыл бұрын

Looks amazing 🤩

@markpalmer3071 5 жыл бұрын

Damn that looks nice, great tip with planer height too, never ever thought of that.

@craftedworkshop 5 жыл бұрын

Thanks!

@moneymakingmikeg.9555 5 жыл бұрын

Tellin you Bud, you just keep rockin out Super Dope stuff man!!! Very well done!! Dirty Jersey out!!

@craftedworkshop 5 жыл бұрын

Thanks a lot!

@SuperTitan73 5 жыл бұрын

looks really great, and good to see lagavulin in your cabinet ;-)

@craftedworkshop 5 жыл бұрын

Just got back from Scotland and visited the distillery 😊

@borlampic6152 5 жыл бұрын

Johny doesn’t need Ikea. Ikea needs Johny!!

@HellStingOzunit 4 жыл бұрын

cool for ideas on making a display case

@David-_-_- 2 жыл бұрын

Nice video. What application do you use for the design sketch up. Looking to do a mini under stairs wine cellar and trying to find a good app to do the design.

@raynoladominguez4730 5 жыл бұрын

Beautiful work.

@craftedworkshop 5 жыл бұрын

Thanks!

@wakkowarner9522 2 жыл бұрын

the most impressive part of this build - - is your collection of alcohol! 😲😂🥃cheers!

@sapelesteve 5 жыл бұрын

Very nice work Johnny! Those cabinet doors turned out great & I love how they "soft close". Great job!

@craftedworkshop 5 жыл бұрын

Thanks! Soft close everything 😊

@victornedamo2883 Жыл бұрын

can be use also plywood this kind of project

@DillonHuffmanOutdoors 4 жыл бұрын

I see you got some Belle Meade Reserve there (and some Handy?). That stuff is magical. Just found your channel - great content. Wanting to try to build a cabinet system for my master bedroom, but have relatively no woodworking experience/tools other than a miter saw. Will def check out your other videos!

@kennethkwok3068 4 жыл бұрын

I have a question. Will the cabinet door frame strong enough to hold 18"x70" glass? Thanks in advance!

@reforzar 5 жыл бұрын

Lookin sharp!

@craftedworkshop 5 жыл бұрын

Thanks Brian!

@coryvannote 5 жыл бұрын

That looks so good!

@craftedworkshop 5 жыл бұрын

Thank you!

@luckythegerman 5 жыл бұрын

Hey. Your Safety on the router table is not bad in any Case. But in carpentry, i use the big brother of these things (Really, i dunno if they are called Router tables as well, they are similar but bigger...) and we never used Featherboards for something like that. There are a few cases where they get used, but i have not needed one yet. Also, why do you use those grip things on the jointer? It would freak me out to not feel what the cutter head is doing.

@dgillespie13 5 жыл бұрын

Well done, Enjoyed the explanation for the choices and methods you used. And like all comments I have a question... why did you choose the HORRIBLE metal shelf strips? A few carefully placed holes would give you some adjust-ability for bottle heights, but those strips are just not in keeping with the craftsmanship of the piece. Always that one troll. Loved it. Take it as a challenge for next build.

@craftedworkshop 5 жыл бұрын

Traditional shelf pins wouldn’t have been nearly strong enough to support the glass shelves and bottles. I personally don’t mind the look of shelf standards, but you could paint them black if you don’t like the look so they disappear more.

@joshtodd8600 4 жыл бұрын

Man the router bits are awesome but what profile did you use

@rockbandgamer 5 жыл бұрын

Johnny Brooke sold his soul to Powermatic.....Fuck it I would too Tbh.

@paulbull1993 5 жыл бұрын

Fantastic, job "very" well done !!!!

@craftedworkshop 5 жыл бұрын

Thanks Paul!

@masterofframes 5 жыл бұрын

Really loved the work you've done. And the video!

@jemimacortez9868 5 жыл бұрын

another great built

@craftedworkshop 5 жыл бұрын

Thanks!

@newsunshine3810 Жыл бұрын

Wish we had bought sooner

@DanielLandsverk0 5 жыл бұрын

DAMN that looks good! Well done!

@markarmstrong2592 5 жыл бұрын

Looks awesome when are the invites out for drinks lol

@craftedworkshop 5 жыл бұрын

Hah, thanks!

@marciowashingtonmartins3954 5 жыл бұрын

Very good

@hazembata 5 жыл бұрын

I dig it.

@joseramonkuchacon784 5 жыл бұрын

Good work Man Thanks

@PapaGleb 5 жыл бұрын

Always a pleasure watching you work. The black is that paint or finish? and what type/color?

@craftedworkshop 5 жыл бұрын

Thanks! The finish is linked in the video description.

@cassondratakemoto7185 3 жыл бұрын

what brand is your router table?

@UNKN0WN_YT 5 жыл бұрын

Johnny....what are you planning on doing with the joiner you're using in the video?

@craftedworkshop 5 жыл бұрын

It’s going to a friend of mine, sorry!

@diydad6723 5 жыл бұрын

nice build johnny, one thing tho did notice a lot of half empty alcohol bottle's lol

@craftedworkshop 5 жыл бұрын

😊

@clancyi 5 жыл бұрын

Superb. I'm gonna do this for my friends bar. Is there a link for those steel strips where you can move the shelves locations??

@craftedworkshop 5 жыл бұрын

Thanks! Yup, these are the ones: amzn.to/322pQrH

@spenserolson7937 5 жыл бұрын

Another awesome build! What was that small parts holder you were using for the router?

@craftedworkshop 5 жыл бұрын

Thank you! That’s a coping sled from Infinity Tools : www.infinitytools.com/coping-crosscut-sleds

@lukethomas12 5 жыл бұрын

Why did u take off the stop block system on your mitre saw station

@craftedworkshop 5 жыл бұрын

I haven't gotten it set up again quite yet, was just seeing if I still wanted to have it. Short answer: I do :) I'll be reinstalling it soon.

@noahbaker3263 5 жыл бұрын

Johnny what is that song from 11:20 to 11:40? I feel like that episode from Pete & Pete where he's scanning the radio looking for his favorite song.

@craftedworkshop 5 жыл бұрын

Glad you dig the track! It's this one : www.epidemicsound.com/track/SnWBfeROXK

@keithbaker5042 5 жыл бұрын

How in the hell do you keep paint from getting all over everything? Very Nice Job!!!! you mite neeb to take a class of AA LOL!!

@Paradinha14 5 жыл бұрын

How long are you crafting stuff? How can I enter this world and start learning it?

@craftedworkshop 5 жыл бұрын

I've been woodworking for about four years now. I learned pretty much everything I know from videos here on KZfaq and other resources online.

@aranykai 5 жыл бұрын

Look great! Do you get any rattle with the glass only being held in with the strips? I always use a tiny bead of silicone to avoid any noise, but those strips really make it look amazing.

@craftedworkshop 5 жыл бұрын

Thanks! No rattle but some silicone certainly is a good idea. I thought about it but forgot before installing the glass.

@AlexKrippner 5 жыл бұрын

Where did you get the Velcro hand sander? you mentioned in the video you'd have a link but I don't see it. Thanks! Great video series inspired me to do my kitchen remodel

@craftedworkshop 5 жыл бұрын

Whoops, thanks for the reminder! amzn.to/2HkX9OG

@Dr.KennethNoisewater 4 жыл бұрын

I want that THH!

@rickl6697 9 ай бұрын

"How to make glass cabinet doors with router bits". Yeah, and an entire professional woodworking shop. Great video, but I was hoping for a video using just a router and bits and a table saw.

@boboconnor1403 5 жыл бұрын

I've only made glass doors a couple of times, but everytime I get a ton of warping and twisting. Very frustrating!!!

@jhernan40 3 жыл бұрын

Hey amigo great video my only complaint is you don't have tequila there hhahhhaha

@andrewcaruana13 5 жыл бұрын

Are these doors the exact same size as the opening of the shelves?

@craftedworkshop 5 жыл бұрын

No, these are overlay doors so they overlap the edges of the cabinet.

@rackbuzz 5 жыл бұрын

Love that finish Johnny. What is the sprayer make/model?

@craftedworkshop 5 жыл бұрын

It’s the Fuji Q3, love it! amzn.to/2KQCqnS

@jesterraj 5 жыл бұрын

Hi can you put up a link for the router bits....thx.

@craftedworkshop 5 жыл бұрын

They’re linked in the video description.

@lukethomas12 5 жыл бұрын

I kind of find it funny how he says the powermatic tools will last for years but he seems to always upgrade and get knew ones every couple of months I'm not saying they won't but it is something I have noticed

@craftedworkshop 5 жыл бұрын

I have upgradeitis for sure, hah. I don’t see myself upgrading from the machines I have now, I just should have gotten the bigger planer and jointer to begin with!

@boico123 3 жыл бұрын

How it cost to build this with labor...

@bulklogan539 3 жыл бұрын

Looks good, how is your liver?

@rm709 5 жыл бұрын

Don't get me wrong, your videos are top notch- but for the weekend woodworker, near impossible to replicate. I don't have the money to spend on all the tools that sponsor you- and therein lies the issue. Each video has a sponsor that, understandably lets you produce such great content- but makes it hard for us "normal folk" to follow.

@craftedworkshop 5 жыл бұрын

I appreciate that but also think the same techniques could be used with less expensive versions of the tools I have. A Dewalt planer and Powermatic planer both perform the same basic operation, one just gives a better surface finish and has a wider capacity, for example. I actually think this project is pretty accessible if you buy pre-milled lumber. A table saw, router table, drill, and sander would be the only major tools needed. You could flush up the glazing strips with a hand plane if you wanted, or even sand them flush with a random orbit. I’m sorry for the long reply, I just get kind of frustrated by this comment, because there are a million ways to do everything in woodworking. I wonder if Norm got the same kind of fan mail back in the day. 😂

@DustinGebhardt 4 жыл бұрын

I may have a problem. I keep pausing the video to look over your collection of alcohol rather than the details of this project. Also, Smuggler’s Cove! Great book.

@1pho3nixmatt 5 жыл бұрын

Holy crap.

@ivokolarik8290 5 жыл бұрын

⭐

@americosouza6199 5 жыл бұрын

show

@paololignea395 4 жыл бұрын

6:55 no wood pegs or domino in the junctions ? With the expansion of solid wood, those doors will not last long.....

@seattle_ice 4 жыл бұрын

Millions of cabinet door are made with nothing but glue at the corner joints. It is too small an area to have a problem with wood movement.

@paololignea395 4 жыл бұрын

@@seattle_ice Maybe in America, where they don't have furniture culture. But here in Italy, where the furniture has been made and exported all over the world for centuries, in the junctions it is customary to put wooden pins or mortises and tenons. Gluing dead is a wrong technique at the start that is usually used to save time or inexperience. If I offered a job to my client I would at least be taken for an amateur .....

@chrisgrima 3 жыл бұрын

Either spend 200k in woodworking machines or just get the cabinet made.

@user-ur9qi7hk4e 2 жыл бұрын

الاهو اکبر

@flyingvish 5 жыл бұрын

Damn im early😂

@craftedworkshop 5 жыл бұрын

First! 🤣

@paoloroccia3077 5 жыл бұрын

😮😮😮😮😮😮😮👍👍👍👍👍👍👍👍👍👍

@sunthatneversets4255 4 жыл бұрын

Nice channel but completely unrealistic for someone to do same built with you getting free stuff and anyone following would need a personal loan to get all these tools and jigs and no offered detailed plans.. so what’s the sense..

@alby2233 5 жыл бұрын

Awesome to watch, but you are definitely speaking Spanish, way over my head.

@craftedworkshop 5 жыл бұрын

Thanks! I realize there is definitely some technical jargon here but if you just research cabinet doors more, hopefully you can make sense of it all. I certainly had to do plenty of research before tackling this part of the project.

@rockbandgamer 5 жыл бұрын

Don't be trying to clickbait with the DIY tag if you're gonna use a small fortune in tools to get the job done. Your audience is made up of woodworkers. Not normies. I hate the term DIY. It cheapens your project.

@stevengreen4316 2 жыл бұрын

Pointless vid for me pal. Far too fast. Obviously speaking to people who are pretty savvy already. This begs the question, why make the video. Hope you dont think im having a pop. Im a subscribe and get alot from your vids. As a newbie. I cant grasp that so quickly.

@David-_-_- 2 жыл бұрын

Nice video. What application do you use for the design sketch up. Looking to do a mini under stairs wine cellar and trying to find a good app to do the design.