How to make Lead Acid Battery at Home, Complete Guide, Tools needed for making Lead Acid Battery

Рет қаралды 245,939

3 жыл бұрын

Only $7 for SMT Order:
www.nextpcb.com/?code=clinicxwd
PCB Boards 10pcs for Free:
20% off - PCB Orders:
www.nextpcb.com/?code=clinicxwd
Read Instructables for the Lead Acid Battery Making:
www.electroniclinic.com/how-t...
Subscribe to my New KZfaq Channel, if you want to watch my videos in Hindi/Urdu
/ @letsgetstartedd
Related Videos:
36V, 48V, & 72V Ebike battery charging with 12V adaptor or a solar panel:
• Ebike Battery New Inve...
Support me on Patreon and get access to hundreds of projects:
/ electroniclinic
Project Description:
********************
In today’s episode, you will learn how to make and repair any type of Lead Acid Battery using new and old positive and GND plates. I will also explain what are the necessary tools and how to use them? I will also explain how to make the Battery internal and external terminals. I will also explain in detail how to internally connect the positive and GND plates? In the end I will also explain how to prepare electrolyte for the battery using Sulfuric Acid? The process of making the electrolyte can be really dangerous for the beginners, so I highly recommend purchase the readymade electrolyte for the battery or make the electrolyte at your own risk.
********************
Amazon and Banggood Purchase links:
*****************
Hydrometer for the Lead Acid Battery
amzn.to/3u3ehOQ
Lead Acid Battery Electrolyte
amzn.to/3m3k2Jy
Other Must-Have Tools and Components:
Arduino Uno, Nano, Mega, Micro "All types of Arduino Boards":
amzn.to/3fk5OTi
Top Arduino Sensors:
amzn.to/3vZbnfM
Super Starter kit for Beginners
amzn.to/3cq56C5
Top Oscilloscopes
amzn.to/3ctF3d8
Variable Supply:
amzn.to/2PEAqE7
Digital Multimeter:
amzn.to/2QGRPg1
Top Soldering iron kits: "best"
amzn.to/39nqDtb
Top Portable drill machines:
amzn.to/3suQMh7
Jumper Wires:
amzn.to/2NYPEDA
3D printers:
amzn.to/3ruG1dt
CNC Machines:
amzn.to/3cuZWVv
Electronics Accessories:
amzn.to/3sueV7z
Hardware Tools:
amzn.to/3m9UhaN
Banggod Product links:
Arduino Uno R3:
www.banggood.com/custlink/mK3...
Arduino Mega R3:
www.banggood.com/custlink/mKm...
Arduino Nano:
www.banggood.com/custlink/mmK...
Complete Soldering Iron Kit:
www.banggood.com/custlink/DGK...
Digital Multimeter:
www.banggood.com/custlink/mmD...
The most complete starter kit for beginners:
www.banggood.com/custlink/DmG...
Drill Machine for PCB:
www.banggood.com/custlink/GKG...
Solder wire:
www.banggood.com/custlink/3mm...
Wirecutter, stripper complete set:
www.banggood.com/custlink/3Dm...
Breadboard:
www.banggood.com/custlink/DDG...
DC Variable Power Supply:
www.banggood.com/custlink/Dmm...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
Follow me on Facebook:
/ 190031841821771
mail me: stu_engineering@yahoo.com
About the Electronic Clinic:
Electronic Clinic is the only channel on KZfaq that covers all the engineering fields. Electronic Clinic helps the students and other professionals to learn electronics designing and programming. Electronic Clinic has tutorials on
Arduino
Raspberry PI
image processing
gsm based projects
Bluetooth based projects
esp8266 projects
Nodemcu projects
robotics
desktop application designing and programming
Project Related Tags:
#LeadAcidBatteryMaking
#HowToMakeLeadAcidBattery
#LeadAcidBattery
HOW TO MAKE LEAD ACID BATTERY AT HOME
LEAD ACID BATTERY MAKING STEP BY STEP
LEAD ACID BATTERY INSTRUCTABLES
THE PROCESS OF MAKING THE LEAD ACID BATTERY
DIY LEAD ACID BATTERY
LEAD ACID BATTERY WORKING
TOOLS NEEDED FOR MAKING THE LEAD ACID BATTERY
BATTERY HYDROMETER
HOW TO MAKE ELECTROLYTE FOR THE LEAD ACID BATTERY
LEAD ACID BATTERY MAKING COMPLETE GUIDE
HOW TO MAKE LEAD ACID BATTERY CELLS
LEAD ACID BATTERY POSITIVE AND GROUND PLATES
HOW TO CONNECT LEAD ACID BATTERY PLATES
PROJECT SPONSORED BY NEXTPCB
LEAD ACID BATTERY MAKING AT HOME
HOMEMADE LEAD ACID BATTERY
LEAD ACID BATTERY MAKING BUSINESS
HOW TO EARN FROM MAKING LEAD ACID BATTERIES
LEAD ACID BATTERIES BUSINESS
LEAD ACID BATTERY EXPLAINED
ELECTRONIC CLINIC
DC MACHINES AND BATTERIES

Пікірлер: 301

@ElectroniClinic 2 жыл бұрын

Watch my video on How to make Lithium Ion Battery using a Homemade Spot welding machine. In this video, i have also explained the BMS wiring. I am sure you will like this video. kzfaq.info/get/bejne/g9l4fJajvdrJgKM.html

@lalbdrpun1319 2 жыл бұрын

Where can we by all those equipment sir.....

@sarathkumar2783 2 жыл бұрын

Where we buy a positive plates and ground plates??

@slsystemic5582 Жыл бұрын

Please tell me what is the liquid used for oxidation?

@charlielloydfiesta7793 2 ай бұрын

Hard to find where to buy battery materials

@sibongeleninxumalo7434 Жыл бұрын

One of the best practical and explanatory videos by far, keep up the good work, looking forward to seeing more of your content

@bobbofly 15 күн бұрын

Woah! Not only in english, but with clear & precise diction! I've a friend from Pakistan Whom I used to work for, & he has a bit of an Urdu brogue to his speech. I couldn't love him more dearly if he were my actual biological brother, but I have unbelievable difficulty understanding him over the phone. 😂😂 In person, no problem. Must be some kind of lip reading thing happening. It's so tough finding one of these videos with valuable information in them, only to find that ridiculous youtube translator to be the only option to decode it. Your data is a treasure trove! 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻Those pouring dies, though - kind of seem like they need a receiving spout on their side to make the pour easier. Just a thought.

@minesti3725 Жыл бұрын

hi I appreciate your work but I have one concern, where do you throw the acid contained in the batteries? why not dispose of it in barrels and use thicker gloves to protect yourself, I would also suggest protecting your face using a mask and protecting glasses otherwise it could be very dangerous. you have the concept of repairing batteries in mind, now try to develop the safety part of the project as it is the most important aspect

@ElectroniClinic Жыл бұрын

I made this video at home, I don't do it as a business. Just tried to explain the basics.

@EMNM22 Жыл бұрын

Thank you for making this video. I have a better understanding in how the battery works now.

@aaronsilvers300 Жыл бұрын

Fantastic production!

@DWALLPAINT Жыл бұрын

Very professional work, Thanks my friend ❤️❤️👌👌

@rberg79 3 жыл бұрын

very cool, thank you. great quality video and explanation.

@deepu.p4127 3 жыл бұрын

Well explained... Thank you

@SmartTronics 3 жыл бұрын

That's Great Bro Thanks For Sharing 🙏🏻👍🏻🙏🏻

@ArticulatelyFox 2 жыл бұрын

awesome video, great narration

@ihtsarl9115 Жыл бұрын

thank you for posting this informative video

@techinnovations822 4 ай бұрын

Thank you so much for sharing the experience

@programmingdigest7582 3 жыл бұрын

Nicely explained and is one of the best videos

@benjaminpainter378 3 жыл бұрын

Great video! Note of safety: Add acid to the water, not the other way around. It is much safer to do. When sulfuric acid touches water, it quickly heats up. By adding it into water slowly you can minimize the amount of heat generated at one time. Why buy the plates instead of making them? With all the other lead casting that is going on, it seems natural to cast the plates as well. I ask just in case there is a special reason I don't know about

@dejayrezme8617 2 жыл бұрын

I'd be curious about that too. Did he cast all the terminals out of lead or tin-lead solder? It's possible thin plates are significantly harder to cast because as soon as the lead touches the form it cools down. So long thing plates are harder to make. Maybe you'd have to roll them through a press from a thicker sheet of lead.

@benjaminpainter378 2 жыл бұрын

@@dejayrezme8617 I figure if you heat up the press it shouldn't be that big of a deal. I have been able to cast pretty thin sheets of metal for other projects.

@dejayrezme8617 2 жыл бұрын

@@benjaminpainter378 Yeah I've see a "how it's made" video and apparently it's no problem casting lead into these shapes. I think you also create most of the plate by pressing lead oxide paste together to get a larger surface area. So you can't just cast them (see wikipedia)

@losttownstreet3409 2 жыл бұрын

@@dejayrezme8617 you still could cast them with lead, but you'll get another type of battery. For solar, traction and usv batteries you could use solid lead plate battery. They have a higher lifetime but don't do as much current. The oxid forms itself at the first charge. This form was used for the first battery buses and trains as it's possible to make easy maintenance with solid lead electrodes with spacers. They cleaned the sludge, a quick clean of the solid electrodes, refill the electrolyte and the train was ready for the next week.

@dejayrezme8617 2 жыл бұрын

@@losttownstreet3409 Thanks. Yeah I've since read some more and tried to read a paper on nife / nickel ferrite battery. Apparently current and power density is all about surface area and they are boosting nife batteries using carbon nanotubes that are then coated with the right nickel oxide and whatnot. So it seems making it yourself is totally possible with various chemistries but simpler processes requires far more materials and more weight to achieve enough capacity and power.

@benderbender988 2 жыл бұрын

You are very good. Very clear video.

@integrationofmanandmachine4714 3 жыл бұрын

super well you did there

@SIDDHARTHKUMARPANDEY. 3 жыл бұрын

Very interesting and helpful video👍👍

@alexnewton3376 3 жыл бұрын

Great video after a long time.

@carlosalbertosilva3176 2 жыл бұрын

congratulations, I very very gratiful, tank you for sharing, good blass YOU, TANK'S

@rossadew4033 3 жыл бұрын

w/o any further delay, LEAD's get started!!

@ElectroniClinic 3 жыл бұрын

I should have said this lolxxx.

@dragan3290 2 жыл бұрын

LMAO 😂😂😂👍

@BOREDANDWELLBORED Жыл бұрын

@Electronic Clinic instead of conductive water why not use mercury? Mercury will produce higher voltage

@leafbranch1872 Жыл бұрын

Lead's the word!

@driverguy7 Ай бұрын

Excellent explanation of battery basics, Thank you for making and sharing this video! New batteries are VERY expensive, and we may be able to make our own using videos like this .

@cw4608 2 жыл бұрын

You are the guy to know in the case of an apocalyptic event!

@ChrisCraigie-oi1un Жыл бұрын

Fantastic presentation! Really outstandinig. Are the jigs for solering the terminal plates available or did you custom make them? Great job.

@clarencementor4862 3 жыл бұрын

Do you have a video on how to make both the positive and the negative (ground) plates? I am looking for the chemical composition of the plates of the lead acid cell.

@JonathanH13 Жыл бұрын

The negative ground plate can be made using a lead sheeting. The positive plate is lead dioxide, which is toxic and difficult to work with. But if you start with a lead sheet for the positive plate, a lead dioxide coating will form as the battery is used. The sulphuric acid will oxidise the lead once a positive charge is supplied by the battery charger. This will reduce the strength of the acid, so you need to start with a less diluted sulfuric acid than you would normally use.

@7rang. Жыл бұрын

Thank you for English version

@mattlawton4715 3 жыл бұрын

Like it build your own very well done better than buying one very satisfying. Built not brought 👍

@rogerreales3r727 3 жыл бұрын

good video friend I'm from Colombia, I work with batteries how do i get the positive plates they don't sell them in Colombia

@ScienceTechnologyExperiments Жыл бұрын

Nice video and well explained.

@timiraneranjana 3 жыл бұрын

wow! amazing video

@shahrozKhan4u 3 жыл бұрын

Great effort

@botchvinik8668 Ай бұрын

Thank you for the excellent video, showing all the important steps and processes. And also for the long list of links in the 'Description' where we can find so many tools and products. One thing i didn't see there though is a vendor of the positive battery plates that you said you purchased for $0.3/plate. Where can one get these plates?

@johng.3740 7 ай бұрын

Thanks for the video, very useful in an extended grid down situation.... eventually all batteries will wear out good to know how to rebuild them. There are ways to recondition SOME lead acid batteries depending on what lead to it no longer holding a charge. There are two ways to recondition batteries that i know of...the Epsom Salt method and the Arc Welder high current method. Is it possible to clean the lead in the battery? Some chemical that removes the surface contaminants but does not attack the lead?

@giangmelinh 3 жыл бұрын

*Wow amazing skills this must be necessary when parts are not readily available*

@saschafriedrich7041 3 жыл бұрын

nanunana oO

@MrHandKman 5 ай бұрын

Great instructions! Now I looked into the "links below" and everything else but the tools that you used were listed. Could you please provide a list of proper links to tool products , since I may want to make my own batteries to measure.

@sun99149 2 жыл бұрын

very good video!

@pmiller6067 2 жыл бұрын

Thank you!!!

@wilbrown7247 3 жыл бұрын

who knew a battery was that simple!

@AbdurrehmanKhang 3 жыл бұрын

nice work Sir

@poke12gauge32 2 жыл бұрын

Can you or do you already have a more indepth tutorial on making the electrolyte? This was amazing guide and this one was rather easy to understand

@JonathanH13 Жыл бұрын

The acid concentration can be anywhere between 15% to 50% acid to water. If you start with one liter of water, then slowly add up to one liter of acid, waiting for the solution to cool down, as required. Do not add the water to the acid.

@karlotto1623 3 жыл бұрын

Hi, How many density is after the final load? thank you!

@almostfriend4147 2 жыл бұрын

Excellent!! I think you skipped when joint being made both parts of the battery can you explain how and what type of material was used plz..

@AbdulMajeed-hx4jv 3 жыл бұрын

Well done

@shinekollara 3 жыл бұрын

that's nice vedio bro you are awesome

@nimalsandunsiri4024 Жыл бұрын

Thank you very interest

@arunatechandtools8972 Жыл бұрын

Can we use good ground plates for positive plates?

@lww3988 6 ай бұрын

好棒的視頻！謝謝❤

@BriansCorner815 Жыл бұрын

What material is used in the center of the positive plate grids?

@RiyaKhan-or2xo 3 жыл бұрын

Superb 😊😊

@electronic7979 3 жыл бұрын

Very good

@eadsonacademy7988 2 ай бұрын

You mentioned, you bought positive plates. I checked all your links, couldn't find a link to battery plates. Where did you buy from?

@retroguardian4802 3 жыл бұрын

Thanks a lot! Can you tell me what the battery cell plates are called so I can google them? I would love a site I could buy the plates and battery terminal mold or the premade battery terminals I have seen in some other videos.

@wazirazam2591 3 жыл бұрын

My friend, all equipment and tools used in restoring the battery incl plates are available in Pakistan local market. The positive plates are also made by the expert locals in the city. See how plates are made: kzfaq.info/get/bejne/jKumg82AsNG0qXk.html

@sethtaylorm925 3 ай бұрын

Where are you buying those plates, i need them and tubular forklift ifla plates.

@israrkhan7471 Жыл бұрын

Best nowledge about connection of player in the batery

@israrkhan7471 Жыл бұрын

Connection of plates in the battery that mean

@storylee3033 3 жыл бұрын

The lead acid battery was successfully made. N E X T Please tell me how to protect the environment from abandoned lead acid.

@josephchawngthu1706 2 жыл бұрын

I love this vedeo,how can i buy this repairing material and lead acid plates,can you help me

@ezeobasi3989 2 жыл бұрын

Good job! Where can one buy the tools?

@jozefnovak7750 2 жыл бұрын

Super!

@moeganim3509 3 жыл бұрын

Please can you tell us from where you buy the POSITIVE plates. I could not find it in the description ?

@YKChief 3 жыл бұрын

Do you need 03351920761

@elfbi4043 3 жыл бұрын

I need some positiive plates

@patudtv4962 3 жыл бұрын

Hello brother where can buy this tools for making battery?

@riazahmed2727 Жыл бұрын

so cool

@abbasmeraean3643 2 жыл бұрын

Nice👍🏼❤

@gerardoezequielmizgerfigue3116 Жыл бұрын

Cómo puedo conseguir las herramientas para reparar las baterías de ácido plomo

@rizaldiesimili1630 2 жыл бұрын

Ser how to made the plate do you have videos.. What the engredients..

@omsingharjit 3 жыл бұрын

Which binder material is used ??

@lakmaldeshapriya7635 Жыл бұрын

Please make video on how to make positive and negative plates

@sinahassan5780 2 жыл бұрын

يمكن تعطيني فكره ماهو المعجون الذي يطرح فوق الشبك الرصاص في الخليه الموجبه والخليه السالبه وكيفه الحصول عليه

@qualitymeats3161 8 ай бұрын

Where do I purchase the negative and positive lead acid plates and where do I purchase the forms that I will need for the lead pourings?

@osrickfelicio6920 3 жыл бұрын

Helpful video.what material you use for separator?

@wetwilly66 2 жыл бұрын

Bump

@allendurie5921 2 жыл бұрын

This is pretty frickin incredible. When the world ends now I know how to do this lol

@ElectroniClinic 2 жыл бұрын

hahaha

@Kevin-fn5tk 2 жыл бұрын

@@ElectroniClinic Hi Could I buy to your equipment for the mould of the battery whats your email sir I would need to send it to europe. Also could you sell me a manual plate mould

@bobbybrown6127 3 жыл бұрын

Where do I buy the metal dies from?

@samasami7444 Жыл бұрын

From were we can bay thise important metal daieas please give me answer....

@michaeltopping8227 3 ай бұрын

what are the separators made from

@conceptofeverything8793 Жыл бұрын

I have heard somewhere that if you replace positive plates with thicker ones and overall raise the cells a little bit in the packaging (could use simple plastic bars assembled to a # crate) you will get a much better lasting battery. If youre going through all of that, might as well consider doing that. Also charge the battery if you got time and flush the acid into a container if its possible to desulfate it even slightly.

@luckydubeinrc5165 Жыл бұрын

true, its the sulfphate that drops to the bottom that kills the battery in the end

@conceptofeverything8793 Жыл бұрын

@@luckydubeinrc5165 Well then, might not even have to go through all this hassle and cut out the bottom first.

@brandonmehrabi268 Жыл бұрын

Most lead acid batteries fail because there is so little space beneath the plates. As the cells shed it builds and shorts the plates. If you look up "Delco farm light plant batteries" you will find glass jar cells from the 1900-1920s. You'll see how much space they left beneath the plates, you could observe and replace/repair individual cells

@felixadelioelizechemercado691 3 жыл бұрын

Genios del reciclado....1...Quisiera saber qué material es lo blanco que ponen entre las rejillas de plomo, sí podría decirme qué material es...?(Cartón papel plástico). ,,,,con que reemplazaría en caso que no haya en mi país. 2...Esas rejillas de plomo... se deberían de limpiar...? o se dejan asi como se saco...? explicación por favor

@tecnicsboys 2 жыл бұрын

Es plástico yo también estoy buscando esa info , creo que también se podría usar PVC o tela fibra de vidrio

@montneymon-ta-knee6810 Жыл бұрын

what is the paste mixture of the positive plates

@mckutzy 4 ай бұрын

What exactly is that mold called for making the bus for the internal connections.... Having no luck at finding that mold???

@sufianwarsi3000 5 ай бұрын

Very nice step by step guidance. But why didn't you mention ratio of Electrolyte ( percentage of Sulphuric acid & water ).

@thelifeanddimension 3 жыл бұрын

From where you bought the plates??

@68pishta68 5 ай бұрын

where did you buy the plates? I'm in USA and a 12V car battery is $100-300 US.

@khailenmanghaokipklmanghao6354 Жыл бұрын

I want to buy the materials of this restoration battery where can i get it.

@lucky14397 3 ай бұрын

where to get the battery plates? Can you please mention the contact?

@asifalikhan8677 2 жыл бұрын

Sir please baten plate or die or new battery box kahan say milengy... Please reply

@pronige104 Жыл бұрын

Where do i get the dies in north america? Or if someone has a set can you give me the dimensions to make my own ?

@GEOKONSTRUKTOR 3 жыл бұрын

Super

@allrounder-kn6ye 3 жыл бұрын

NICE VDO

@oussama5597 2 жыл бұрын

what kind of plastic sheets or material are using to sperate the sheets from each other? Thansk

@JonathanH13 Жыл бұрын

A sheet of fibreglass material will work.

@vasuv59 3 жыл бұрын

Positive plate is not applied with Lead peroxide?

@gsamygsamyngovindasamy9530 9 ай бұрын

I like you welcome iam indian villege citizen and technician ❤

@kumararathnayaka6936 Жыл бұрын

I need buy positive plate and serarate seat how mach 1plate

@MuhammadAli-iy4qn 3 жыл бұрын

bhai 200amp ke battery ke casing kaha sy milay ge????

@BlackAeronaut 2 жыл бұрын

This is a very informative video. That said, though, I really, REALLY wish there was more emphasis placed on safety here. 1) Make sure that what you're doing is in accordance with local environmental protection regulations. In the USA, batteries are treated as hazardous waste - which is not to say you're not allowed to restore a battery, but if you're caught being this careless with lead and electrolytes, you will be certain to get hammered with a hefty fine. 2) Despite being simple, there are very good reasons why lead-acid batteries are as expensive as they are. Look at the PPE and safety equipment lists below to see what I mean. 2) Proper PPE - this is not something you want to be doing while wearing chanklas! --Wear good leather boots designed to keep liquids out (preferably with steel toe protection, because lead is HEAVY and dropping a monster battery this size on your foot is a guaranteed trip to the hospital). --Wear gloves rated for protection against hydrochloric acid. --Use properly rated respirators for lead dust (which can do horrible things to your lungs) and acid vapors (ditto). --Face shields and goggles are an absolute must when cutting lead with a chisel, handling molten lead, and acids as well. --ALWAYS use leather gauntlets when handling molten lead - even if it's "cool" for a molten metal, it's still molten metal. It WILL give you instant 3rd degree burns! (Think: Liquid Branding Iron) 3) Other safety considerations: --Do not do this in an enclosed space! Work in a thoroughly well ventilated area. --Have a neutralizing agent for hydrochloric acid on-hand at all times! And make sure there is plenty of it - better to have too much than not enough! --Emergency Eye Wash Bottles. Do not cheap-out here. You will thank yourself if you ever have to use them. But if you have to go cheap, then a water hose with a ball-valve on the end will work, too. Just make sure the hose has pressure before you start working - you do not want to be fumbling around while acid is eating your eyes. (Hence the ball valve at the end.) And set it up away from where you're melting and handling lead - the last thing you need is to accidentally splash water onto molten metal. --EXPLOSION HAZARD!!! Charging lead-acid batteries can produce hydrogen gas. Hydrogen gas in atmospheric air is EXPLOSIVE. Exercise proper charging procedures to minimize electrical sparks and arcs, and DO NOT have any open flames nearby! --Always have an A-B-C-Rated fire extinguisher on hand. In fact, have two or three on-hand. You can't go wrong with having more than one. Remember: being thrifty is all fine and good, but not at the cost of life and limb. Be sober, be aware, and be safe!

@markshort9098 2 жыл бұрын

It's sulfuric acid that's used in batteries, not hydrochloric acid.. battery acid is only 35% acid when new, it's not going to instantly eat flesh, i recover battery acid and distill it to get 98% acid for lab use and even 98% won't instantly eat flesh at room temperature, you easily have a couple of minutes to wash it off before it starts to burn

@jorgecardoso8913 3 жыл бұрын

Were did you get the plates

@ElectroniClinic 3 жыл бұрын

from q local market here in Pakistan.

@budel1990 2 жыл бұрын

Nice saftey shoes.

@maxschon7709 2 жыл бұрын

In Europe any bureaucratic runs bananas seeing you dumped the old fluids out of the battery.

@rolandoacebuche4057 3 жыл бұрын

what kind of material for separator cell posetive and negative.thank im from philippine

@YKChief 3 жыл бұрын

03351920761

@MrMarin06 2 жыл бұрын

it's fiberglass

@albygivens3367 2 жыл бұрын

Great video on how a battery is built/rebuilt. But there are no details for making or buying the tools, positive plates, ground plates or separators, as he states, "you can start your own business". This video seems to only satisfy the curiosity of how things work and a procedure to accomplish the construction, noting that Replies/comments are not being answered concerning how to get the materials or tools to do the job. Then again, I may be missing something.

@ElectroniClinic 2 жыл бұрын

i tried my best searching for the tools and things but these are not available on Amazon.

@ElectroniClinic 2 жыл бұрын

i am already in contact with someone if he can supply the materials, then i make show you guys how to make these plates at home.

@alexmanouilov9526 2 жыл бұрын

I have a question is a positive plate made out of different materials?ty

@nedlyest 2 жыл бұрын

It's still lead, but they heat them to different temps to get a slightly different lead. I want to say one is lead oxide and the other is lead sulfide.

@he730 Жыл бұрын

@@nedlyest they heated for +400 C to make it pbo2