How to make this Beautiful Hammer? Making your Own Tools is Rewarding!

Рет қаралды 183,469

Жыл бұрын

Limited run Brass Hammer paskmakes.com/the-pask-makes-...
I always enjoy making tools and I reckon this one came out awesome. It was an interesting project from designing it to working out how to make it.
DFM Toolworks: dfmtoolworks.com/
Hoffman Blacksmithing: www.hoffmanblacksmithing.com/
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Пікірлер: 266

@PaskMakes Жыл бұрын

Limited run Brass Hammer paskmakes.com/the-pask-makes-brass-hammer/ I always enjoy making tools and I reckon this one came out awesome. It was an interesting project from designing it to working out how to make it. I also figured what I did wrong on the etching. Even though I know better I forgot to etch in a plastic container inside of a pan of water, I reckon this caused a galvanic reaction. DFM Toolworks: dfmtoolworks.com/ Hoffman Blacksmithing: www.hoffmanblacksmithing.com/

@rexanguis214 Жыл бұрын

Love your work……kayaks were cool…..hey you ever think about some tutorials…..explaining techniques, phraseology, tools/machines for novices……gods bless

@jamesbrown99991 Жыл бұрын

A few drops of ferric chloride on a piece of sponge works really well for easily and controllably etching copper (and presumably brass). It should take a few minutes of light dabbing/rubbing at room temperature. I've used both ammonium persulphate and ferric chloride for etching PCBs, with the latter being much faster, better and easier to use.

@davidblalock9945 Жыл бұрын

Nope, you’re not allowed to say that. No patting yourself on the back. Arms weren’t designed to flex that direction. Patting back is the job of your audience. Please don’t take our jobs, thank you very kindly. Now, Bravo! Amazing work! By the way, handles in your wood of choice would be much more premium here in North America, where hickory handles are as common as sin.

@youtukang Жыл бұрын

@@davidblalock9945thank you sir

@projetotrebuchet7862 Жыл бұрын

Amazing work mate!!! Would love to have one of those… but sadly it says it doesn’t ships to Brazil : ( it looks amazing! Still want a pask tool to have here… cheers!

@bokkenka Жыл бұрын

I'm not falling for another April Fools' Day sale.

@Vickie-Bligh Жыл бұрын

What a gorgeous hammer. My absolute favorite, functional art. "I did it by eye". Mate, your 'by eye' is better than most folk's measurements. This was a joy to watch, Neil. Thanks for sharing.

@PaskMakes Жыл бұрын

Thanks very much Vickie - glad you enjoyed the video! :)

@carsonwells1785 Жыл бұрын

A truly beautiful tool. I could spend hours just dreaming about how jow joyful it would be to smash my thumb with such a creation, but with the current state of my finances I'm afraid I'm stuck with the smooth sea stone that I bound into the crotch of a tree for fifteen years until it had grown in place. But I did subscribe just so I can torture myself with future temptations.

@georgecunningham9175 Жыл бұрын

I have absolutely no need for a hammer such as this - so why is the urge top own one so overpowering??? Seriously, your design sensibility and your craftsmanship still fascinate me, and I look forward to each video. They are all so well produced, informative, and amusing - a standard for other creators to strive for.

@I_SuperHiro_I Жыл бұрын

We’re men, and it’s a beautiful, handmade tool. That’s why lol.

@joebonomono5078 Жыл бұрын

It could have been anything, a paperweight maybe. I don't think it's the hammer you want posses, it's the time, skill, craftsmanship, design, effort, etc that went into the hammer. You appreciate what it took to make the hammer. This says much about you as a person and it's good.

@PaskMakes Жыл бұрын

Thanks very much George! Glad you appreciate the design and enjoy the videos! :)

@cquiles386 Жыл бұрын

Watching your videos makes me feel like a kid sitting in the workshop with his kindly, hardworking dad entranced by what he's making. I've enjoyed the calm, positive demeanor you bring to your videos. You're not just passing on knowledge or entertainment through these videos; you are also passing on life lessons in planning, flexibility, persistence, and taking pride in ones work. It's been really fantastic being subscribed to your channel and I've enjoyed the sentimentality that your videos bring. Been sitting on letting you know this for a while as I don't tend to write comments but in the end it felt important to let you know.

@larrybud Жыл бұрын

I actually like the pitting in the logo. If you hadn't said otherwise, I would have thought it was deliberate. If you don't like it, you could always do a paint fill with enamel. It would level right out, and really make the logo pop.

@RichardMerrill3Hawk Жыл бұрын

I was going to say fill with black epoxy, but either would work. I love the hammer.

@PaskMakes Жыл бұрын

I reckon pitting can look great on an etch. I liked the etch I did on my brass padlock where I stippled the background. I did think about painting the logo but I wanted it to be more subtle and not stand out too much. :)

@milesparris4045 Жыл бұрын

@@PaskMakes I like the deep pitting, makes it look like hand stippling.

@UnwelcomeGuestVideos Жыл бұрын

@@PaskMakes just a thought here, but would it be possible to fill it with solder and then sand it flat? Might be a more subtle than paint.

@liamfoxy Жыл бұрын

I really like the look of the logo. It looks like a stipple/ hammered engraved background, which is an effect I love on things.

@PaskMakes Жыл бұрын

Glad you liked it Liam! :)

@michaeltreadwell777 Жыл бұрын

Whoever thought 'I'd like a Brass Hammer - I know, I'll make one' ! Neil, you are a true craftsman, be it in wood or metal. Amazing and mesmerizing to watch ! Thank you for sharing your many skills with us - quite captivating ! Take care 🙂

@tinkeringinthailand8147 Жыл бұрын

"Crude Drive Dog" Perfect in my book 🙏

@pmdinaz Жыл бұрын

Your workflow always holds my attention Neil. Thanks for being such a good teacher and creator!

@chewychop Жыл бұрын

I cannot WAIT for it to arrive and have it hanging next to my Hand Tool Rescue screwdrivers and wrenches.

@Lukas-sv1rp Жыл бұрын

The pitting actually looks great, it almost looks like it was peened on. Thumbs up 😀

@kusler67 Жыл бұрын

That is one fine thumb detector! Sure to blacken a nail with plenty of style! Your videos are a genuine treat! Thank you!

@PaskMakes Жыл бұрын

Glad you enjoyed it Trevor! :)

@SceneArtisan Жыл бұрын

NGL, I like the hammer with the 'accidental' patina. Nice work, Neil!

@I_SuperHiro_I Жыл бұрын

Honestly, the pitted logo is a unique look. I kinda like it.

@CraigsWorkshop Жыл бұрын

That hammer is simply gorgeous. I'm envious! It's great to see you doing more machining on the channel. Your filming is always so well lit, so crisp and nicely framed. The small, tasteful amounts of camera movement are perfect. Awesome result with both the hammer and the video.

@PaskMakes Жыл бұрын

Thanks very much Craig! I'm really enjoying machining even though I'm still learning, I think that's why I like it so much. :)

@caesar2164 Жыл бұрын

To get the lathe turning to be less grabby with brass: lower your flat top (which is normal to the surface if at the correct z-height for facing, which gives it zero rake) HSS tool in your tool post so you make your tool have effective "negative" rake (ie not normal to the contact point)

@PaskMakes Жыл бұрын

Thanks of that, I'll keep it in mind for next time. :)

@axialmount5571 Жыл бұрын

excatly or you can grind a negative rake in the tool

@cassidionline2002 Жыл бұрын

I could watch you make mallets all day long. Top notch work, sir.

@gonegliding2966 Жыл бұрын

The hammered copper look in the logo looks great and gives it the Pask Makes uniqueness! Nice work!

@PaskMakes Жыл бұрын

Glad you liked it even if it wasn't planned. :)

@milesparris4045 Жыл бұрын

No, you're not allowed to say it's pretty cool looking, because it's very cool looking.

@Captainwonderlad Жыл бұрын

The addition of machining makes your content all the more enjoyable for me

@PaskMakes Жыл бұрын

I'm really enjoying machining at the moment - glad you're enjoying it too! :)

@Druforithe Жыл бұрын

This is so pretty! Always love watching Pask making tools with his hand tools.

@PaskMakes Жыл бұрын

Thanks very much! :)

@CATANOVA Жыл бұрын

When you put the effort in the results speak for themselves 👍

@PaskMakes Жыл бұрын

Thanks very much! :)

@CATANOVA Жыл бұрын

@@PaskMakes Credit where it is due.

@therealemmpunkt Жыл бұрын

Cutting wide grooves: It helps if you move the form tool slightly left-right while cutting, so you are not cutting with the whole diameter at once. Makes the groove a bit wider and the radius at the end is not really a radius anymore, but in this case i don´t see a need for precision... Another beautyful project👍

@PaskMakes Жыл бұрын

Thanks very much! That makes sense as it would be halving the area being cut. :)

@JessWLStuart Жыл бұрын

I think the pitting in the letters looks awesome!

@corinkayaker Жыл бұрын

Great video mate! Fantastic Brass Knockometer! One of the most beautiful I have seen! Just a little chuffed to see one I made in your lineup too! Great idea turning between centres with removable sacrificial discs! Very cool. The drive dog looks everything but crude!

@corinkayaker Жыл бұрын

Actually I think there was two there I made?

@PaskMakes Жыл бұрын

Thanks mate! You're right there is two Niroc hammers you've made in that line up. I reckon turning between centers was definitely the go on this project, worked out great. :)

@dieterjosef Жыл бұрын

I do not like throwing around the biggest praise easily but I found myself more than one time during the video to hit the like-button seeing that I already done it. Thank you for this video.

@michael-james1970 Жыл бұрын

Crude drive dog ? That's one fo the best drive dogs I've seen in a while.

@Typersx1 Жыл бұрын

Lucky enough to order one! 🎉🎉🎉🎉

@Durfboard Жыл бұрын

Coming from someone who has used a lathe by hand, you are extremely talented.

@negotiableaffections Жыл бұрын

You are a true craftsman, Neil. All your fabricating techniques are a joy to watch. And I personally like that 'rustic' logo, it gives the hammer the handmade-ness that makes it special.

@youtukang Жыл бұрын

Hello sir

@Billy_Dino Жыл бұрын

Quite charming the logo to be honest...I liked that way!

@carolburns8667 Жыл бұрын

Really appreciate your craftsmanship 🇨🇦

@threeriversforge1997 Жыл бұрын

Looks fantastic. If anything, a dab of Cold Blue in the lettering will just speed up the patination process and give the logo more of a black color that stands out from the rest of the brass. I love how the pitting looks, honestly. It really looks like something that was made in the early 1900s.

@PaskMakes Жыл бұрын

Glad you like it Vaughn! I did think about cold blue as well as painting it but I really wanted it to be more subtle. I was disappointed with the pitting as it wasn't planned but I'm still happy enough with it. :)

@Pedro_Sanglard Жыл бұрын

Unmatched skills...Gorgeous work.

@cerberus2881 Жыл бұрын

The saw rasp may be my favorite, most satisfying to use hand tool.

@AW-pz3qc Жыл бұрын

I quite like the hammered appearance of the logo and noticed your etch pan wasn't plastic, because many moons ago when I did etching, I remember lining a tray with thick black plastic. Just gives other options for varied finishes, not a mistake at all, imho! Love the hammer.

@PaskMakes Жыл бұрын

Thanks very much - glad you like the hammer! I realised just after editing the video what I'd one with the etch (directly in the pan), I knew better but just switched off when setting up to etch. It wasn't too disastrous though. :)

@thermion7869 Жыл бұрын

What fine craftsmanship, top marks!

@BAILEYWOODWORKS Жыл бұрын

I love your brass work! beautiful result and great planning!

@Goalsplus Жыл бұрын

I like the texture of your logo that you did on purpose.

@joewhitney4097 Жыл бұрын

Beautiful Hammer, great design and video. Love your work. Thanks for sharing.

@Rubbernecker Жыл бұрын

Great job Neil, absolutely beautiful.

@PaskMakes Жыл бұрын

Thanks - glad you like it! :)

@Verificador119 Жыл бұрын

Very nice hammer,well done!! Thanks for showing your art

@homemadetools 10 ай бұрын

Beautiful hammer. We shared this video on our homemade tools forum this week 😎

@classicbandgeek Жыл бұрын

As an April Fool's gag you could have mentioned you forgot to program the Z depth stop on your etching solution 😄

@samanthadean1083 Жыл бұрын

Very cool hammer, Neil!!! 👍🏻👍🏻👍🏻❤️❤️❤️

@andrewknots Жыл бұрын

Beautiful work

@TheDivasoprano Жыл бұрын

Always such a pleasure to watch you work.

@PaskMakes Жыл бұрын

Thanks very much Heather! :)

@SquishyThing 10 ай бұрын

A tip for brass, it work hardens so you want to take off quite a lot at a time. If you cut too shallow the tool just pushes the brass out of the way and hardens it, turning it brittle and ruining surface finish.

@bell_nz8008 Жыл бұрын

Awesome job. Looks fantastic

@mumblbeebee6546 Жыл бұрын

A thing of beauty!

@keithgoldston2859 Жыл бұрын

Great video thanks for showing us your methods

@yeagerxp Жыл бұрын

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself 🇨🇦

@Shae_Sandybanks Жыл бұрын

Looks awesome! The pitting looks quite cool once the patina changed the colour

@DaleDix Жыл бұрын

Very nice. Everything you make comes out well done!

@octaviasaenz6666 10 ай бұрын

Lovely machining. That parallel gadget is cool!

@bummer6 Жыл бұрын

I like the pitting in the logo. Looks like it's been stippled by hand.

@seansysig Жыл бұрын

Beautiful and nice design choices.

@arfamortis1 Жыл бұрын

@Pask an easy way to reduce chatter in brass is lower the tool, making the cutter run negative rake. I'm a retired instrument makers, 50 years in trade.

@danpinto1322 Жыл бұрын

What about shiming the rear of the cutter up to create a negative Rake? Wouldn't going lower have a variable Rake based on depth and work radius?

@edsmachine93 Жыл бұрын

Very nice work. Great idea. Thanks for sharing. 👍

@alexxustube Жыл бұрын

Great work, Pask! 👍👍👍

@elisabethreeves1786 Жыл бұрын

Oh! Did you notice the reflection in the saw blade when he was cutting the slot for the wedge? Really excellent shot!

@errolpoxleitner9586 Жыл бұрын

Beautiful job building this hammer.

@ianvicedomini2648 Жыл бұрын

That's a beautiful looking hammer Neil really nicely crafted. You're definitely aloud to praise mate your videos are outstanding and thoroughly enjoyable indeed 👌👍🏽👏

@PaskMakes Жыл бұрын

Thanks Ian! :)

@sapelesteve Жыл бұрын

Amazing build Neil! I must admit that I really enjoyed watching you hammer your way through that one! 👍👍🔨🔨

@PaskMakes Жыл бұрын

Haha! Thanks very much Steve! :)

@R.Craig.Collins Жыл бұрын

As always, a great video

@jewdd1989 Жыл бұрын

It’s absolutely beautiful

@terminalpsychosis8022 Жыл бұрын

The depth and spacing of the central lines, looks like the golden ratio. Fibonacci would smile.

@_zhawkeye_9808 Жыл бұрын

...probably the nicest attitude adjuster I've ever seen!...fortunately, my wife doesn't need another in her toolbox...😉 Very well done...👍 Matt

@deeiks12 Жыл бұрын

Using the adjustable parallel to get the cheeks parallel to each other is a smart technique. And of course the hammer is gorgeous, as always.

@PaskMakes Жыл бұрын

Thanks very much!! :)

@youtukang Жыл бұрын

Thank you sir for sharing

@keeganlarock8490 Жыл бұрын

Negative rake for tooling for soft metals. Grinding the round insert slightly tapered down at the front will help a bit over the 0° rake you uses. Hope it helps! Keep up the great content. I always love watching!

@PaskMakes Жыл бұрын

Thanks Keegan - I'll remember that for next time. :)

@AlwaysCensored-xp1be Жыл бұрын

I always been using zero rake HSS. A touch of diamond hone makes a difference.

@lancemillward2462 Жыл бұрын

these look awesome

@tonyalvarez486 Жыл бұрын

Great work buddy - love the content.

@lester44444 Жыл бұрын

Can't wait to see it get some good use, and a possible refurbishing video from you :) such a great tool!

@bushratbeachbum Жыл бұрын

Beautiful.

@deanhall4069 Жыл бұрын

That is a beautiful Hammer.You have a huge skill set.

@PaskMakes Жыл бұрын

Glad you like it Dean! :)

@williamkerr3350 Жыл бұрын

Great work ,it looks salubrious.

@jerryjohnsonii4181 Жыл бұрын

Fantastic Brass Hammer !!!!!!!!!!!!!!!

@TheBrianDotson Жыл бұрын

I hope you have another run of making these when I can save for because I would love one for my brother! These are beautiful

@PaskMakes Жыл бұрын

Thanks very much Brian! I'm not sure but you never know. :)

@juanvicenteruiz4669 Жыл бұрын

Siempre disfrutamos de tús vídeo. Abrazos

@dragade101 Жыл бұрын

Sooo shinny!!

@54mgtf22 Жыл бұрын

Love your work 👍

@kmherethere Жыл бұрын

Ordered mine!

@jimphubar Жыл бұрын

Pretty fine looking hammer Dude.

@ahac2128 Жыл бұрын

great job

@wickdghost3639 Жыл бұрын

I love the Shinto rasp. Best thing I ever did was buy one of those. I use it for all kinds of stuff. Most recently I took a factory motorcycle seat and cut down the foam to make us a custom size and shape and I used it to level everything off and make it uniform. Worked soo much better than I could of ever imagined it too

@PaskMakes Жыл бұрын

They really are a great tool, they work well and a pleasure to use. :)

@AlwaysCensored-xp1be Жыл бұрын

@@PaskMakes Carbatec?

@MASI_forging Жыл бұрын

This looks so beautiful 👍👍

@mickwilson127 Жыл бұрын

Lovely job z Neil!

@Gus0046 Жыл бұрын

Muy bonito y buen trabajo 👍

@maxyudin Жыл бұрын

I think all the decorations are superfluous. A simple barrel with rounded grooves is much prettier.

@rainynight9926 Жыл бұрын

Nice work 👍

@zakmikati Жыл бұрын

Amazing.. Just amazing.........

@darrylbuckett5380 Жыл бұрын

I reckon Thor would like to add one of those to his collection. Cheers

@stuartthoms8393 3 ай бұрын

Its a shame, im 11 months too late to party 😮 for such an amazing tool. I dont need one, nor have the use. For one. It just draws you in. Brass and gold fever lol☺️. I give it to yous guys have skills and a great craft.😮 Keep it,it up and amazing things you make. Loving watching your channel. 😃😊