100% worth building these tires. They work great on ice and in snow. Just insane

You need to make more how too's. Love your delivery! Too entertaining!

Dude... Your voice and way you talk: "You should be a commentator on a radio station!" :D

ive made a couple of different ice tires for my XR650 and DRZ400, and have had various results, but i really like this one. it seems like the amount of time to build the tire was worthit for the end result, and durability looks better than my screw-tire, but faster & cheaper to make than my snowmobile-stud tire. i think ill try this, good upload!

less screws on the front tire, good tip. I'm gunna try that setup this winter.

I'm sharing this with the Citreon 2CV OffRoadClub , High rating the voice over also, much respect . Cheers for the tutorial Zach .

done this many of times works pretty good, I remember seeing a video a lo g time ago they called it "the meat grinder"

Glad i saw this, over the winter i tried riding in the snow without any studs , and got stuck in a foot of snow.

i like the way how you scream instead of talk normally to your audience !!!!!!

omg voice is great. id love to know how you picked up on such a specific pitch/ tone and overall word placement just so on point hilarious. i think you spent alot of time in the car with your dad playing AM radio? awesome video

Is it just me, but I loved ur screaming! Very good video

I really like his enthusiasm :D

Great so theres 150 screws now laying around for riders to poke holes in their tires. Awesome

Why Are you screaming?

Excellent Video!

love this idea! sharing it to the world. thanks!

ZachAtk1 is a beast all the haters should shutup and learn to appreciate the commentary, especially in the badass dirtbike videos

Thanks for posting this zach

Ive done it using about 375 tapcon screw (same as video) Its awsome soooo much traction and they barely used at all while riding on the lac and enduro , fireroad too with snow / ice. 100% best way to get into snow riding for cheap dont use a back tire that is too much used like i did other wise you wont like when the snow get too much deep!=) Also ... Use a new tire with the biggest knob you find in the front ..... Those screw in the front will last forever but they are sticking out way to much of a used front tire.. Use a new one it will last year and works better

If they ever make a movie of my life. It'll be a lot more exciting if this guy narrates.

I like when you talk so entertaining hahaha Good Work

Good vid, good idea. I liked the commentary as well.

Y the fuck am I watching this I live in sunny Queensland oz and don't ride a dirt bike

We do an Elephant Ride here in Colorado. It's a blast...I think I will take an old tire and do this for next years ride.

Great video. I was wondering if it realy matters if I use an old tire with still at least 50% left?

those tires look extremely violent! you could easily kill a crowd of a hundred people by running them over with those tires on

amazing broseph! i'll be doing this for sure.

This looks badass!!!

I'm thinking about two things that I want your opinion on: 1- should I tac weld each nut on screw? 2- should I use short screws on the outermost knobs and put them into the tire? like towards the inner tube ( ensuring they are short enough not to go all the way through).

I clicked on this video and got excited when I realized it was ZackAtk lol

You have great modulation in your voice. You should be a teacher!

looks like you might live in Utah. not sure if you have heard of the herrriman enduro race in may. you might be interested in it. i did it and loved it

"you're not done yet!" why the hell not?! it looks awesome

I'm a fan of your vids. I am from nh. I just did this to my rear tire. How did it work for you? I was nervous that they were too long? Can you please let me know how it worked out and how many should I out in the front tire. I'm on my way to do my buddy's tire now

Aw god! Do more videoes with that voice! :D I liked it hahah

Awesome video and thanks for the shout out

do you think you could spray flex seal on the inside of the tire to prevent the screws from puncturing the inner tube

Sweet!...thanks for posting this vid :)

Damn! Nice work. !

Wish we had snow races here in minnisota!

cool vid, sound like the kid from the polar express movie the one with the glasses lol

I just push thumb tacks through the bottem. i climbed mount evrest with them.

thanks for the info really nice tutoral

I plan on following your instructions . Why no studs on the outside knobs?

Its good idea and its really have good performance

laughed like hell ! love it !

You should post a video for the front tire as well. What was your pattern for the front?

Good Video!

WHAT!?!!!? SPEAK!!! UP!!! IN!! YOUR!!! NEXT!!!! VIDEO!!!!!!! Lol your awesome man

Great idea

This guy, has the best voice.

I bet u are not louder then me ... I am not joking ,,, YOU R WORK ,,PURE ART,, ....

cool but yeah they seem to wear super quick and wouldnt be usable on cross terrain like asphalt? And when they were down you'd probably just have to chuck the tire or keep it and have that liner foam to protect itself So how about other solutions like chain?

Dude you are so hyper, chill bro!

hey zachatk2 I know this videos was made a long time ago but how do you clean your dirt bike after riding and prevent your bearing and other components form freezing up after washing, or do you just not wash your bike until the spring time hope this makes cents thanks.

Good idea man perfects

How long do they last before they dull down.... Have you ever had any rip out?

These are the absolute best tires you could build. I ride down pavement to get to the lake

how much does this cost for both tires and is 200 enough for one tire or two?

I tried that but the chain was too short... I added a link to the chain but then the whole wheel moved back so far and ended up all the way against the rear of the swing arm with the chain too loose lol

couldnt you use snowmobile studs that would cost the same amount? or would they not work as well

nice video men

I would put washers in between the screws in the inside of the tires. for saftey, there for I dont want to ruien my tires.

duck tape does work..so does cutting old inner tube

OK THANX FOR THE HELP!!!!!!!!!!!!!

Nice bikes 👍

Your going to want to go to the outside of the tire so you can really lean it over on the ice. Other wise you could lose traction and go down hard. It is ice. Like slippery concrete

Will this work for plain ice? I'm worried the spikes will be too long. I'm planning on taking my 110 out this winter on a pond.

I'm doing this this winter since my knobbies have about 4.5k miles on them and I'll be getting supermoto wheels in the spring

I made them! Great video! Only problem I had was that the 1 1/4 screws were hitting my mud guard/cover thing right if front of the rear shock? Did you have this problem…and if so how did you fix it?

Good video

Thank god I live in Florida

Omg that screaming Hahaha, hilarious!

Will this work on minibike tires??? Changing the screw and nut size of course.

Really helpful!

cool looks good

I have a couple questions, if someone could please answer me here: I want to stud some tires for riding on frozen lakes, not for tracks/frozen ground. I'm wondering if long aggressive studs like these are more for like frozen tracks where they can dig in more, not for solid ice, and shallower screws/studs are more suited for ice riding. I feel like long screws would get flimsy on solid ice. Am I on track here or what? Also, what exactly did you mean when you said crossthread those nuts onto the screws? Do the screw threads not quite match the nuts so they lock together? Do you have exactly what nuts you were using? thanks in advance and great video!!!

Do the tires have to be in good condition?

Would this work for a snowmobile

I'll suggest you to stop shouting.

very good!

Is it good in loose and compact deep snow? Like 9inches?

Do the studs only last one ride? I was talking to a dealer and you don't really want to ride on any non ice or snow surfaces. Also I watched this video on silent due to the fact being at work.

WHY AM I SHOUTING NOW!!!!! Great vid man!

Do you think i can do this on a ktm 125 exc for winter road driving?

how long does it last?

can you do that with a pocket bike with bald tires too?

You don't need the internet, I can hear you without it ))) Still, nicely done there ;-)

So expressive 😁😁

Try flex seal to seal the inside of the tire maybe

Gotta ask, how did they hold up?

I would change the title to "how to prep your bike for zombies"

love your voice :D

Good idea

Please reply! Im interested in your idea but correct me if im wrong but these bolts dont quite fit on these screws and this why you used the impact right? Because i dont own an impact and im planning to do this with wrenches. And if the bolt doesnt fit on the screw and you have to convince it to fit it maybe hard for me to do it

what pattern works best for the front tire?

Can you use these when there isn't snow

Dude your screaming makes this video so amazing lmfao

How has these been working?

Trying this. Did you put screws on the sides in back? I'm thinking of putting swall studs on the sides up front. What do you think? Thx!