i almost forgot about mopeds!!!!! thank god your back

I'm so glad I re-discovered this channel! I used to ride everywhere on my old smokey Tomos (even crossed the border with Belgium, was an 8 hour round trip!). Really feel like giving the old moped some deserved maintenance now

Exellent, it reminds me of the last fender I hand-cut at my Jawa CZ in the previous century. Nice to hear from you again.

Oh baby a bullet headlight!! You're talking my love language. 😍

Rear fender looks great. Really nice job.

Great job Pete!

Cool stuff!! Keep uploading :)

I love a good looking Tomos upgrade. My dad has a Tomos..... and a minivan.

Fantastic video! 🤩

Dang Pete I thought you forgot about mopeds! Glad to catch a vid.

Great to see your face! Good job

Awesome stuff !!! Had one in high school /college I’m 35 now looking to get another one. I missing fucking around with them so much potential!!!!!

Thanks for posting moped vids, getting me mopedivated again.

I'm in the middle of something similar on my Maxi/magnum Hybrid.just chopped the rear fender. put the Magnum front forks on and the magnum swing arm on the maxi frame about a 1 3/4 inch lift over the maxi height... engine rebuilt 64cc polini/Biturbo exhaust.Now for the electrics replaced the 6V lighting coil with a 12 volt coil. tore out the original wiring harness and am building a new harness for 12 volts DC with a Rectifier/Regulator no battery. all LED lighting with a LED directional circuit. Similar drectionals like you have, brought my LED brake light up higher right under the rack.lowered the seat 1 3/8ths inches to hug the rack.LED H4 headlight super bright with a high beam. speedo light changed to LED.Yamaha dirt bike bars just about a inch taller than yours.new brackets for a Cafe racer type fairing with wind screen.I'm thinking of shortening my front fender as well make it look more like yours.going to blackout all the chrome the rack under the seat, foot bars, and front fender all black. it should look nice against the bright Yellow frame.

exellent love the content like this-ajusting old w/shop machinery not so much cheers.

Awesome

Glad to see you back, Love the Fender bracket, I have been wanting to do the fender swap. I don't see the brackets on your site though are they sold out?

Very Nice!!¡¡¡!!

Links for the parts used in the video? Would love to find that headlight for my 2001 Targa restoration project!

Great video! I have recently begun to try and service my Tomos A35. And i need to get the left engine cover off, it seems that i have remove the tubes from the oil pump, since the tubes go through a small hole into the behind of the left engine cover. I can't put the engine cover back on now anymore, because the flywheel is not alligned, so i gotta have it off. Also i would like to clean it up in there. If u ever see this, would u consider making a vid about how to remove the oil pump correctly without deleting it? xD Or just a helpful article, i would like to try to go about it myself. I think my biggest challenge is the clamps that holds the tubes on the oil pump. I would like to service the oil pump as well. Hope hearing from you! Currently no vids about servicing the oil injection can be found and information is scarse. :(

Finally looking at mopeds and I am aiming for a Tomos. It's nice to see the video's are still as good as ever. I'd love to see rack options for the Tomos which allows it to carry delivery cooler box bags for Uber Eats. When I think of commuting, I think of packability.

Bonjour,bravo d aimer autant la moped👌👊🏻💪🏻🙏🇫🇷

ICE COLD BABY

Hey! What headlight was used. Want one for my Tomos in the UK 🇬🇧

With gas prices so high and my commute being 43 miles there and back I really could use one of these brand new

Hi, thanks for the video/info. I looked on your website for the taillight you used in this video, but only found the Sprint taillight holder. Is that what you used, along with a sprint light assembly? I can’t find anything smaller with that fender angle on bottom. I want to shorten my rear fender and do what you did here. Please let me know, thanks

Hello! I was wondering if you could make a video about what to look for when trying to purchase an old moped? If not not, that’s fine.

Any tips on setting up turn signals? I bought a tomos that was optimized for racing so only the headlight and tail light works. Would love some advice so it's a bit less illegal come summer.

great look i did that looks great im new to this moped thing lol ni have a question i start it runs then it dies i need to adjust the throgt . n i got leds turn lights 3 out 4 the left light dont work! can you help thank you lm donnie from pittsburgh pa

Great videos just found you

I'm surprised this guy did not have a 'Big Reveal'. He didn't even give you a good look at the finished product

Big lights save lives...embrace them.

Where did you get that tail light/bracket?

We just got this same moped for the kid. It has the pedal conversion already on it but he does not like it and want to go back to kickstart. Is it an easy process

Hello from NYC. You should visit...

Those turn signals can work on a tomos targa lx a35?

TOMOS 💕

Man, the biturbo Chrome, my childhood

where did you get that headlamp? Thanks for the video!

Hey guys. I’ve got an old tomos targa lx, I love it but it is incredibly loud. Is there a way to silence this thing as much as possible?

Where can I buy the fender and rear light

Hey, nice video! What’s the tire size?

And here i thought you were going to show me how to Cheech & Chong my moped up... Hey did you know plastic can be made from hemp? I don't know if you can even find any, but it would be cool to see what it would do in your vacuum mold.

Have you ever done a thumb throttle conversion on a tomos just wondering where to start

Does anyone know where I can order this light from ? I don't see the link

Do you still have mopeds for sale ? I'm in Harford county Maryland and would be interested in buying one . Thanks

If you ever get a 1983 5-Star General, with the Sachs motor let me know please.

I'm a bit late to the party, but could you tell me how you fastened the speedometer in the lamp? I have the same one, but no way to fasten the thing inside of it. The bracket that came with it doesn't do anything to keep it in place.

where did you get the headlamp?

I love your website, I love Benji from Treats. Can I buy a tomos with pedals from you? Robert

Hey Pete! I think I've told ya before, but im a daily rider. Summer winter rain snow idgaf...everyday! Well i got hit by another reckless driver. This guy really messed me up, almost got my leg amputated!

I had to run short bars, they suck for long term stock moped use, cause they make you hunch over

Can you make a video how to clean a moped? How do i clean the chain?? lol idk anything mechanical

I've changed my bars but can't get my throttle to spring back did you change the cable

Bars and seating pos??

where did you bought this handle bar?

Where did you buy the headlight

i took my 2015 Revival to a shop they want $1500 dollar to rewire it, is that normal?

Lin manual miranda???

Necesito una de esas xD

Where did you go? Are you coming back?

I think the old side covers or whatever they are called are better looking

Mehr Mofa!

can anyone pls help me find the link for the website

Fuckin Titanium Dave, lmfaooooo. R.I.P STINKI

Pete, did you forget about mopeds?

all that fendering--over and over-- for a sec I thought I was at Guitar center buying a Fender Guitar--maybe a Strat or Tele--gee I can't decide--maybe I'll watch the video again--LOL

The original headlight and fearing are definitely better

Man, with your passion, I wished you were a billionaire and could have bought up the bankrupt Tomos factory :) To keep the dream alive for low cost, reliable transportation vehicles. I am so disappointed with the current market offerings :(

Slovenien moped.

You have to be related to John Lovitz

Super Puch 2.0?

The grandma handlebars look so much better

Buy An apn 6, don't be afraid of manual

MAKE NEW VIDEOS!!!!!!!!!!!!!!!

Stock bars are best bars. Fuck those back breaking low bars.

1 step: get a moped :'-|

Only real men and fine women ride mopeds...

And here i thought you were going to show me how to Cheech & Chong my moped up... Hey did you know plastic can be made from hemp? I don't know if you can even find any, but it would be cool to see what it would do in your vacuum mold.