How To Make Your Own Rolling Double Kayak Stand! Cheap And Easy DIY!!

No video

How To Make Your Own Rolling Double Kayak Stand! Cheap And Easy DIY!!

Рет қаралды 22,987

Күн бұрын

This Hobie Kayak stand worked out great! The Kayak stand is mobile and sturdy, so it should hold up for a long time. Plus it's super convenient because I can roll it right up to my truck and slide the boat onto the bed with ease!
If you are looking for a cheap and simple solution for your kayak, I highly recommend this build.
Parts:
2 - 3 to 4 in Diameter x 10 ft PVC
16 - 2x4x8
16 - 1/4 in washers For Caster Wheels attachment
16 - 1.5 in x #10-14 Screw For Caster Wheels attachment
8 - 1.5 in x 5/16 lag screws
8 - 5/16 washers
4 - Caster wheels
1 lb of 2 1/2 in construction screws
Drill and Miter saw
Subscribe to my channel: / @aaanglers
Facebook: / burlyfishing
My Reviews and unboxings: • Reviews and Unboxings
My Fishing Videos: • On The Water Tackle Re...
Music Credit: Royalty Free Music from Ben Sound at www.bensound.com
Song: Summer
#hobieproangler #kayakrack #kayakcart #diy #kayakstorage #kayak

Пікірлер: 75

@aaanglers 4 жыл бұрын

Cheap, Sturdy, Mobile! What do you guys think I should build next?

@thebeardedpaddler Жыл бұрын

Any concerns about Hobie saying not to store on PVC? They say it can cause the scupper tubes to puck through.

@aaanglers Жыл бұрын

@@thebeardedpaddler I've used it for 3 years now with 0 issues. Every place I've seen a Hobie on display, it's on pvc or metal pipes.

@thebeardedpaddler Жыл бұрын

@@aaanglers I work at a Hobie dealer and I agree. I built a cart similar to yours and put the video up on my channel. I love it but get a lot of questions about Hobies policy on it. Maybe they want to sell the $300 PA cradle I dunno lol

@jerzdev 4 жыл бұрын

I just put one together Saturday morning, took under four hours, just have to add the pvc piping. Came out great, this was exactly what I was looking for.

@aaanglers 4 жыл бұрын

Glad this helped

@Captain03Carlos 2 жыл бұрын

Man these dudes really ask a ton of questions lol …. Watch the video, pause and replay if you have to, Great Design bud … I copied this but added some plywood to the bottom to make a shelf for gear since I only have 1 kayak (PA14)

@vxmine 2 жыл бұрын

Nice. I should be picking my yak up this week and this will be my first project next weekend. Thanks for taking the time to share this with us!

@suburbancowboy1139 2 жыл бұрын

Great video. Glad I found your channel. So much useful info. Just bought a Hobie. Built this last night … it works great for my Ascend kayak and my PA 14.

@pitchkapizda8355 2 жыл бұрын

Bloody genius mate definitely make life easier I have a PA14 and loading and unloading,s always a struggle 👍🏼

@downsouthanglersbayouscreo9347 2 жыл бұрын

Great video! I used your video today to build my own, came out nice and sturdy! Thanks again!!

@aaanglers 2 жыл бұрын

🙌

@christopherhague2329 4 жыл бұрын

Thanks for the video, it was a great help. I watched a bunch of these type of vids and ended up making my kayak stand very similar to yours. Jackson Big Rig HDFD on top and an Old Town Predator PDL on the bottom rack. It is really a difference maker in my garage and for loading and unloading the heavy Jackson.

@aaanglers 4 жыл бұрын

Glad it worked out for you! I agree, this thing was a game changer!

@robbie.a.mfishing2567 Жыл бұрын

Great video dude I am definitely going to build one asap

@scuba6797 4 жыл бұрын

Great video, this idea for a stand was better than I could have imagined. Thanks! I hope to make one soon.

@aaanglers 4 жыл бұрын

Glad this helped!

@jeanwilson1197 Жыл бұрын

Thanks for this great video! 👍🏽👍🏽

@nelsonfelixoutdoors6095 Жыл бұрын

Very nice. Similar to the one I built but much better explanation lol

@iballification 4 жыл бұрын

Thanks for the build video. This is perfect. Definitely gonna copy this design. 👍🏻

@aaanglers 4 жыл бұрын

No problem 👍

@PondsSoloFishing 4 жыл бұрын

Easy but good looking kayak stand.

@aaanglers 4 жыл бұрын

Ponds Solo Fishing thanks brother!

@chaditudefitness5075 4 жыл бұрын

True Michigander. It’s freakin cold. Hour later. It’s freakin hot. Opens garage door.

@aaanglers 4 жыл бұрын

+Chad McTaggart facts

@tresdoobies6581 Жыл бұрын

This is an interesting build... Similar to others on KZfaq that show PVC as the method of support. I was about to build one for my new Outback but decided to check with Hobie for their take on it. First I read my owner's manual and lo and behold there is a section on storage and transport and they have a diagram and describe this PVC method and strongly discourage it. As a matter of fact they say that if their recommendations aren't followed it could void the warranty. I decided to follow up with a call to their corporate office in Oceanside to speak to a technical specialist. The person I talked to described this as a "tragic situation". They explained that there had been a number of issues with cracks particularly around the scupper holes that they determined were caused from storage and transport on PVC bunks. They went on to explain that it would sometimes take a year or more for the cracks to develop. Long story short, they strongly recommend against it! Needless to say I'm looking for an alternative method.

@aaanglers Жыл бұрын

K, no issues here in over 3 years but sure

@tresdoobies6581 Жыл бұрын

@@aaanglers I'm glad to hear that you haven't had any problems

@edelryleite1272 3 жыл бұрын

Excelente job! Congratulations.

@pa1264 3 жыл бұрын

Awesome video great idea

@bigbrownjules 10 ай бұрын

This is an awesome rolling stand! What is the actual width of the cart? I also have a pa12, but the space I have to roll it out is 39” wide. Also, what is the measurement on the inside for the bottom yak. I will be putting a Hobie compass on the bottom. It’s been a little while since this was made, is the pvc affecting the yak at all? The folks at Hobie say don’t rest it on pvc as it could compromise the hull. Not sure if they just want us to buy their $300 yak cradles…

@aaanglers 10 ай бұрын

Total width of mine is 48”, but could be made to fit 39”. Bottom is 38” inside width. Again, you could reconfigure to fit a 32-36” width kayak no problem. No issues with the hull whatsoever.

@rapidsplash9339 4 жыл бұрын

Thanks a ton! It is an amazing video.

@Scottttyboy 3 жыл бұрын

Love the video! bet you answered this a couple of times but in my 360 manual it says do NOT use PVC pipe to store the kayak. Do you know why they recommend not to use PVC pipe and have you noticed any issues using it?

@aaanglers 3 жыл бұрын

No issues. Thats how they display them at dealers so that’s weird

@timdevall5857 3 жыл бұрын

Looked into this on a couple of forums...they want you to purchase the Hobie brand bunks. As unfortunate as it sounds, its the only reason.

@DetroitFishigan 4 жыл бұрын

Good stuff 👍🍻

@aaanglers 4 жыл бұрын

Thanks!

@hobiebassassassin9136 4 жыл бұрын

Awesome Bro, Do you by chance have the measurements of your cuts? Awesome cart, it's going to save me tons of time loading and unloading the Hobie.

@aaanglers 4 жыл бұрын

Hobie Bass Assassin Top and bottom frame were 8 ft x 4 ft. Inner crossmembers were about 45 inches. 4 ft less 3 inches to account for the 2x4 width. Height of the frame varies based on your truck bed. Does that help?

@widowmakericu5705 3 жыл бұрын

@@aaanglers helped me thanks for the info and video!

@CharlesMantia Жыл бұрын

I had to watch the video without sound. So I am wondering why the top cross boards were laid flat instead of upright to prevent warping

@aaanglers Жыл бұрын

Haven’t warped on mine, but you can configure it differently

@kishanramsood734 4 жыл бұрын

great build !! iam copying this design this weekend for my outback . 1 questions thou where did you apply your washers?

@aaanglers 4 жыл бұрын

Thanks! Washers were for the castor wheels or on the lag bolts holding the pvc to the cross beams I believe.

@sp1cyk1mchee 3 жыл бұрын

@@aaanglers thanks for the vid... ok, i assume you used the "8 - 5/16 washers" for the lag bolts holding the pvc, but what about the "16 - 1/4 in washers" listed in your materials list?

@aaanglers 3 жыл бұрын

@@sp1cyk1mchee They were for the castor wheels to keep them on. 4 per wheel

@aaanglers 3 жыл бұрын

@@SFretnchillin updated and added the pvc diameter too. Thanks!

@toddlester8063 3 жыл бұрын

Question for you about this build out. I am getting ready to build something similar for a spot in my garage. I know bigger is better, but what would you say are the smallest dimesion for the cart (LxW) that would still keep the kayak stable? I was thinking of making it 42" wide (36" wide kayak) by 60"-66" long (12ft long kayak). Do you think that is too narrow and short, or would it be ok? Keeping the cart as small as possible will really help with the rest of the stuff I need to store in my garage. Thoughts?

@aaanglers 3 жыл бұрын

I only went this size because there were less cuts. You could definitely shave ove some inches. This thing is ROCK solid.

@n2olowen2olowe35 Жыл бұрын

How did it turn out with those dimensions?

@toddlester8063 Жыл бұрын

@@n2olowen2olowe35 works fine. Honestly could be even narrower if needed.

@thomasharder8254 2 жыл бұрын

I'm a little late in the game, what are the dimensions of the stand? LxWXH, and what measurements do I put on the PVC, Thanks

@aaanglers 2 жыл бұрын

Not exactly sure lol. I took measurements from my tailgate height of my truck. All required parts are in the description

@hobiebassassassin9136 4 жыл бұрын

What was your measurement between the centers of the PVC? I have a PA 14 and I believe they shoud be the same...

@aaanglers 4 жыл бұрын

I can check a little later, BUT, I just laid the boat on top of the PVC on the frame of this build and centered it then marked it and drilled it. I just made sure the PVC was in grooves of the hull. So not sure on EXACT measurement or if the boats would be exactly the same. So I might recommend doing that.

@bigbsince83 4 жыл бұрын

Where did you use the lag screws? I can't see them in the video.

@aaanglers 4 жыл бұрын

They are recessed. So I cut the ends of the pvc at a 45 degree angle and lagged the ends. Then I drilled out the top of the PVC with a 1/2 in bit where it set on the middle cross beems and put the lag screws there.

@karinandlarryathome8711 2 жыл бұрын

Fishing kayaks are heavy so great idea. See my build at Karin and Larry and Home". Take care, LDC

@taggardhecker6380 2 жыл бұрын

How far apart did you place your PVC pipes?

@aaanglers 2 жыл бұрын

Depends on your boat. Just measure the middle underside of the boat beam

@cfrost2096 4 жыл бұрын

What size did you cut those crossmember pieces to?

@aaanglers 4 жыл бұрын

Top and bottom frame were 8 ft x 4 ft. Inner crossmembers were about 45 inches. 4 ft less 3 inches to account for the 2x4 width. Height of the frame varies based on your truck bed.