How To Make Your Own RUST KILLER.... STOP RUST FAST! BoomZilla Video Series #4
Рет қаралды 1,290,586
3 жыл бұрынHow To Save Money making your own RUST STOPPER we have found nothing else that works this well. This SPC Special Concoction Mix not only works better than any store-bought but also loosens rust on rusty bolts, nuts, and all-metal connections saving you time when you have to replace parts. This mix can even be painted over when you are ready to do so.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
Prior Videos in the SERIES:
1st • How To ReConditioning ... Overview of Project
2nd • How To STOP Wheel RUST... Tire and Wheel Reconditioning
3rd • How To SHINE The WORST... Paint Refurbing
USA TOOLS:
Dawn UL PLAT amzn.to/37wpgrf
Trans Fluid amzn.to/3aBGlBS
Blaster amzn.to/2OTeLYF
Spray Bottles amzn.to/3axb7vV
Sprayer Wand amzn.to/37rTnQM
Air Compressor amzn.to/2Zueeyb
Airline amzn.to/3qC95jM
_________________________________________________________
UK TOOLS:
Dawn amzn.to/3dsLZbv
Trans Fluid amzn.to/3pxWHzP
Blaster amzn.to/3uPypV7
Spray Bottles amzn.to/2ZyESpY
Spray Wand amzn.to/3qDc9Mi
Air Compressor amzn.to/3qBLzU0
______________________________________________
Australia Tools
Dawn amzn.to/3r3pnCe
Blaster amzn.to/2MdA9H8
The extremely small compensation we receive from these amazon links helps to keep our channel
available to you all for FREE!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZfaq channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
@SweetProjectCars 3 жыл бұрын
Hello to all of our Great Subscribers!! *** Here is another restoration video on BoomZilla. Make sure you are always checking the new videos that are coming out. This rust stop mix will blow your mind we promise that. ***ALSO, DONT FORGET OUR SWEET SUNDAY REVIEWS ARE COMING BACK TOMORROW! Quote of the Day: If we did all the things we are capable of doing, we would literally astound ourselves.*** Thomas E,
@swm122758 3 жыл бұрын
Have you tried this with a garden sprayer? I'm thinking of the added reach and angled sprayer tip..?
@filmmaker1films374 3 жыл бұрын
Hi I live in Pensacola fl on barancas next to the golf course where y’all shop located so I can get my vehicle cerimic coated message me plz . 19 Audi A4
@muppetmorales8436 3 жыл бұрын
Yeah keep this good stuff coming my man great job
@SweetProjectCars 3 жыл бұрын
Thank you very much my friend! We appreciate your view and comment. Hope you have a great evening. mad Mike the hammer SPC
@icanfartloud 3 жыл бұрын
@@SweetProjectCars You didn't show the "after".....disappointing
@gatornation3889 3 жыл бұрын
Transmission fluid also is great on wood trailer boards. I learned this trick from a national park ranger. Spray the wood with a mix of diesel fuel and transmission fluid, let it dry for a few days and boom, wood is basically sealed and will last for years
@SweetProjectCars 3 жыл бұрын
Thank you for watching and sharing my friend! Hope you have a great day. mad Mike the hammer SPC
@pearlperlitavenegas2023 2 жыл бұрын
Does it add color?
@louisetrimble3490 Жыл бұрын
,another amazing wood preserver/ hardener is the toxic (pink)kind of antifreeze. It actually bonds wuth the wood fibers.
@pamparker4047 Жыл бұрын
What the ratio?
@feetfats1 9 ай бұрын
I've used motor oil with good results
@silverfox-59 Ай бұрын
What is your Blaster?
@Sheeeeeeeeeeeeiiitt 2 жыл бұрын
Started with the AC video, worked over to the leather cleaning, watched the boom truck operation and now on rust prevention….it’s become evident that this channel has everything but the kitchen sink. Swiss pocketknife of KZfaq diy and resourcefulness. Thank you!
@SweetProjectCars 2 жыл бұрын
Glad to help JP! Thank you for watching, we truly appreciate it my friend. Have a fantastic weekend. mad Mike the hammer SPC
@Choober65 Жыл бұрын
If it's a SPC video, you can stake your life whatever it is about, it WORKS. PERIOD. I've used a lot of ideas from this channel and never been let down.
@SweetProjectCars Жыл бұрын
Thank you so much Irish Viking! We truly appreciate the view and comment my friend, comments like yours make all we do worth it! Thanks again, have a fantastic rest of your week. mad Mike the hammer SPC & team
@ronaho8940 Жыл бұрын
Just want to thank you again,watched your video a year ago,and put it on my rusty tundra frame that was almost recalled,but the dealer sprayed it instead.dealer did a horrible job and it fell off a year later.i love that combination of fluids 😅and it works good has stop the rust from spreading and the wicking is unbelievable,spayed it on one spot in middle of frame came back a day later and was wrapped from top to bottom.im so glad you posted this video keep it up I’ll be watching for new great ideas.2008 rusty tundra guy..
@SweetProjectCars Жыл бұрын
Glad we could help, rusty tundra guy :) LOL Thank you for watching and sharing your awesome results, we really appreciate it, hope you have a great week Ron. mad Mike the hammer SPC
@jeffreykbevins7116 2 жыл бұрын
I want to thank you for sharing this with us on how to make the rust killer . You all always have great content on your videos. I found you all back several months ago, but I had sort of lost touch with all till I just found this a few minutes ago . I will be watching for more videos, so you all be careful and stay safe and keep on working and being helpful to viewers out here. As always, Jeffrey !!!
@SweetProjectCars 2 жыл бұрын
We appreciate that Jeffrey! Thank you for watching and sharing, it makes all we do worth it when we have great viewers like you! Have a fantastic week my friend. mad Mike the hammer SPC
@wildbillhackett 3 жыл бұрын
Finally, a cure for car cancer. Your Nobel prize money is in the mail.
@SweetProjectCars 3 жыл бұрын
Thank you very much Will, we will be watching out for it LOL :) Thank you for the view my friend. Hope you have a fantastic day. mad Mike the hammer SPC
@OOICU812 3 жыл бұрын
More like car cancer 'treatment'.
@moonolyth 2 жыл бұрын
Great information for us welders and wood workers too!!! So happy you are sharing secret formula. I have many wood tools this should work just as a wipe-on. I also have lots of scrap metal I keep for projects. Really great!
@SweetProjectCars 2 жыл бұрын
Glad to help! Thank you for watching and sharing, we really appreciate it, have a fantastic day my friend. mad Mike the hammer SPC
@josephpuchel6497 3 жыл бұрын
Hello You are correct transmission fluid mist definitely stops rust even before it starts. Bought a 89 K5 Blazer. The rear trans seal had a slight leak and coated the underneath of the blazer which were areas that they rusted out. Due to this leak when I purchased it I found truck was preserved No Rust. Excellent video
@SweetProjectCars 3 жыл бұрын
Nice!! Thank you for watching and sharing Joseph, we appreciate it. Have a great day. mad Mike the hammer SPC
@Leonardokite 3 жыл бұрын
My old Toyota truck needs a little bit of this tender love. Sounds like a great project for once the snow melts and warms up a bit. Of course you don't know what snow is anymore. Old memories LOL
@SweetProjectCars 3 жыл бұрын
Sounds great! And I gotta tell you Leonard, I will never miss that snow :) Those are old memories and we are thankful for that :) Have a great day. mad Mike the hammer SPC
@shawnmckenzie1786 3 жыл бұрын
Thank you again for being amazing. Hope all is going well for you and your family.
@SweetProjectCars 3 жыл бұрын
Thank you very much Shawn, we truly appreciate it my friend. Hoping all is well with you and yours also, have a great evening. mad Mike the hammer SPC
@sonyasimkin522 3 жыл бұрын
Impressive. First timer, here. I’ve subscribed. TU so much. What a blessing!
@SweetProjectCars 3 жыл бұрын
Welcome aboard! Thanks for joining us, we appreciate it. Have a fantastic evening. mad Mike the hammer SPC
@traumahawk517 3 жыл бұрын
As always I love your video's.......your video's are a real time & money saver...Thank You!! for all of the hard work,time you put into your video's to share with your viewers !!
@SweetProjectCars 3 жыл бұрын
Glad to help Frederick, it's our pleasure. Thank you so much for watching and for your kind words, we really appreciate it, it makes all we do worth it. Hope your day is the best. mad Mike the hammer SPC
@markallison8108 3 жыл бұрын
I can vouch for the power of ATF because my old Mustang had a transmission leak on the right side and it would run down and get on the bottom of the floor pans. And those floor pans still look like new where the ATF sat on them and soaked in.
@SweetProjectCars 3 жыл бұрын
Nice! Thanks for watching and sharing Mark, we really appreciate it. Have a great day. mad Mike the hammer SPC
@josepeixoto3384 2 жыл бұрын
Any kind of oil mixed with the road dirt will prevent rust well; cars that have engine oil leaks never rust on that side, or on all sides if it's the oil pan gasket,had a Camaro like that, needed half a quart every 300 miles.
@brickbreaker9581 3 жыл бұрын
SPCs always has great DIY videos. I truly appreciate your videos sir !!!
@SweetProjectCars 3 жыл бұрын
So nice of you, thank you very much, we truly appreciate it my friend. Thanks for watching. Hope your day is fantastic. mad Mike the hammer SPC
@billyetris 2 ай бұрын
😊😊¼0@😊SweetProjectCars
@TrojanHorse1959 3 жыл бұрын
Great video and tips, I can use this one for sure, thank you!
@SweetProjectCars 3 жыл бұрын
Glad it was helpful!
@enriquemejia6697 6 ай бұрын
Hey Jerry! Made your rust killer formula on my 68 El Camino that's been sitting at the beach for about 25years. This stuff kicks ass, and will trim a lot of hours off the restoration of my 1968 El Camino restoration. Geezers like me appreciate your great tricks you share with us!!!
@SweetProjectCars 6 ай бұрын
Glad we could help Enrique!!! That is great to hear! Thank you for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team
@SweetProjectCars 6 ай бұрын
Glad we could help Enrique!! Thank you so much for watching and sharing your stupendous results, hope you have a sweeeeet week and a Happy Thanksgiving my friend. mad Mike & team
@beauglenn2204 Ай бұрын
What is blaster?
@richardworks481 Ай бұрын
Pb blaster
@gerrykeane4532 7 күн бұрын
How did you figure out the blaster formula it seems to be a mystery
@mrgoodtimes05 3 жыл бұрын
Dawn (most dish soap/liquid detergent) is a excellent surfactant. Makes the chemical wetter, tends to cover more area. We put soap in weed killer when spraying the pastures.
@SweetProjectCars 3 жыл бұрын
Yes it's good, thanks for sharing and watching mr good times :) Hope you have a great day. mad Mike the hammer SPC
@seeer3240 Жыл бұрын
Spraying poison in pastures?? Where our food animals eat? Please explain why that is a healthy smart idea? I must be missing something? Do you work for Monsanto?
@mrgoodtimes05 Жыл бұрын
@@seeer3240 it's called 2-4-D look it up. And I'm pretty sure your animals don't eat on these pastures.
@raytycker1656 Жыл бұрын
@@seeer3240 If you do not kill weeds on pasture land the weeds kill out the grass. The live stock cannot eat some types of weeds so they will have less food to eat each year.
@mikew5988 3 жыл бұрын
Thanks for the tip. I'm always looking for a rust killer. Great video!!
@SweetProjectCars 3 жыл бұрын
You will love this mixture Mike! Thank you for watching, we truly appreciate it. Hope you have a great day. mad Mike the hammer SPC
@harimadhavan1712 3 жыл бұрын
Great Mike. Take care and look after yourself and family etc in these difficult times.
@SweetProjectCars 3 жыл бұрын
Thanks, you too! All is well here at SPC, thank you for watching Hari! Hope you have a great day my friend. mad Mike the hammer SPC
@brianbond8669 3 жыл бұрын
THANK YOU, THANK YOU, THANK YOU!!! Gonna try this on my '76 El Camino.
@SweetProjectCars 3 жыл бұрын
You're welcome Brian! You will love the results my friend. Have a fantastic day. mad Mike the hammer SPC
@beniesenobs 3 жыл бұрын
Me too I'll definitely do this on my 96 Ford Bronco, thank you very much Sir for sharing this on your KZfaq ....
@wonl2 2 жыл бұрын
Thanks for the great video!! I have just one question: What is this thing called Blaster? Sorry, wrong question. My real question is: Is this spray just for surface rust? Ok one more question: Should the rusty area be hit with a wire brush to remove scale and/or paint bubbles to allow the fluid to reach all areas? Thanks in advance for your responses. Thanks for making great instructional videos!!
@SweetProjectCars 2 жыл бұрын
You answered your own question, perfectly, yes, it needs to be touching the rust, so a wire brush is an excellent way to remove those scales/bubbles. Thank you so much for watching, we appreciate it. Hope you have a great evening my friend. mad Mike the hammer SPC
@racerrr2231 3 жыл бұрын
WOW THANK YOU THIS IS SO FANTASTIC 💯🇬🇧
@SweetProjectCars 3 жыл бұрын
Glad you enjoyed it Racer! Thank you for watching and for your comment, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC
@jimjones2086 3 жыл бұрын
Dawn is also the best glass cleaner you will ever use. Mix up a bit in a bucket, like you are washing dishes. Dunk a terrycloth towel in the bucket. Ring it out. Clean your glass with your damp terry towel. Dry and buff with a soft microfiber towel... Scary clean.
@SweetProjectCars 3 жыл бұрын
Thanks for sharing and watching Jim. Have a great day. mad Mike the hammer SPC
@waterloo123100 3 жыл бұрын
Palmolive is better on glass then dawn and it’s cheaper.
@justinpennington7682 3 жыл бұрын
I use motor oil
@nealhead7673 3 жыл бұрын
@@waterloo123100 Madge ,also, has been recommending it for years because it keeps your hands looking young. 😁 "you're soaking in it "
@jdisdetermined 3 жыл бұрын
"Sippin' cyanide and Kool-Aid with Jim Jones." 😎✌ I like CarPro Eraser and a squeegee for glass. 👍
@bfelder8853 3 жыл бұрын
I desperately needed this
@SweetProjectCars 3 жыл бұрын
Glad we could help! Thank you for the view and comment, we really appreciate it. Have a great day. mad Mike the hammer SPC
@edwardsj0 2 жыл бұрын
I used this on my f150 2013 on the rusty spots on the frame. It looks great and I think it’s going to be very worth while.
@SweetProjectCars 2 жыл бұрын
Awesome Jimmy! Glad we could help, thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
@trollbane66 Жыл бұрын
I have used just ATF for years on bare metal. I have never found anything better. I never thought of adding PB Blaster and Dawn to it, but I am definitely going to try it.
@SweetProjectCars Жыл бұрын
You will love it Hubba! :) Thanks for watching and sharing, hope you have a fantastic day my friend. mad Mike the hammer SPC
@pierrejoly9094 Жыл бұрын
@@SweetProjectCars hello, just found your video on the rust killer, I was wondering what is the product you use (4on of the yellows stuff), we live in Canada and rust is part of our live, too much salt on the winter icy roads to make our lives better but hell for our cars and trucks. Thank you very much.
@russellstewart5414 10 ай бұрын
@@pierrejoly9094 PB Blaster. Ne’er to find it in a bulk container not the little spray cans
@Donna777 3 жыл бұрын
Thanks for the great tip! I have a bit of rust under the fuel door of my car. I'm going to do this before it gets any worse!
@SweetProjectCars 3 жыл бұрын
Absolutely Donna! Thank you for watching and sharing, we truly appreciate it. Hope your day is the best! mad Mike the hammer SPC
@captainmorgan6035 2 жыл бұрын
If you want that spot to last longer without rusting more you need to sand it primer and paint it, or you can use whats on the video but you will have to reapply probably every couple Weeks or months depending on how much it rains I suppose
@ethan-youtubetips5420 3 жыл бұрын
You got me hooked for the whole video. When is it coming out? Thumbs up 👍
@SweetProjectCars 3 жыл бұрын
Our videos are posted every Saturday, so stay tuned my friend! Thank you for watching, we appreciate it. Hope you have a fantastic day. mad Mike the hammer SPC
@Nico_335i_DCT 3 жыл бұрын
Very nice stuff Mike. Thanks for sharing and have a great weekend guys! Dutch regards, Nico
@SweetProjectCars 3 жыл бұрын
Thanks! You too Nico! Take care my friend. Hope you have a great evening. mad Mike the hammer SPC
@johnt890 3 жыл бұрын
Thanks for sharing your tips and tricks!
@SweetProjectCars 3 жыл бұрын
Glad you like them! It's our pleasure. Thank you for watching. Have a great day John! mad Mike the hammer SPC
@flattopalpha5316 3 жыл бұрын
Great mix. Went back through vid and got exact mix. Confused about only one thing, when you mixed it up you ended up with 1/2 of a bottle. Then on the rear bumper of Zilla, you had a bottle that was full. Since I didn’t see a ton of bubbles in it I’m assuming you didn’t top it off with water. Did you just double all of the original mix you quoted to get a full spray bottle?
@SweetProjectCars 3 жыл бұрын
You are correct! You can mix up a whole batch of this concoction if you want to :) Thank you for watching my friend, we appreciate it! Hope your day is the best. mad Mike the hammer SPC
@sean4586 2 жыл бұрын
You are a genius! I used to work on a golf course and when we needed to keep moisture on the greens we would add Dawn to the sprayer. It would bind the water molecules to the plant. Thanks again!
@SweetProjectCars 2 жыл бұрын
Glad it was helpful Sean! Thank you so much for watching and sharing, we really appreciate it. Hope you have a fantastic weekend my friend. mad Mike the hammer SPC
@solarsynapse 2 жыл бұрын
Interesting. Usually soap will kill plants in the sun.
@lowspeed2000 Жыл бұрын
I don't get it, water is bad for metal
@digitalbreakthroughs Жыл бұрын
I have no need for this but just enjoy watching videos from people who know stuff. This was so interesting.
@SweetProjectCars Жыл бұрын
Thank you very much Peggy, we appreciate the view, hope you have a great week my friend. mad Mike the hammer SPC
@1232bluejays 3 жыл бұрын
Used your trick of baby oil covered by garbage bag for floor pans. This looks good too. Say hola to Julio for me
@SweetProjectCars 3 жыл бұрын
Will do dave! Thanks for watching and sharing, we truly appreciate it my friend! Hope you have a stupendous day. mad Mike the hammer SPC
@scubbarookie 3 жыл бұрын
Love your channel! Your always giving us some of the best advice I've ever heard of, and product advice as well! Thank you so much for keeping a good thing going!
@SweetProjectCars 3 жыл бұрын
Thanks so much! We really appreciate the view and kind comment my friend. Have a fantastic day. mad Mike the hammer SPC
@harvestmaid5669 3 жыл бұрын
I'm so impressed!
@SweetProjectCars 3 жыл бұрын
Thank you very much, we appreciate your view and comment. Have a fantastic day. mad Mike the hammer SPC
@zippydewdawg5162 3 жыл бұрын
Great video ! Thx for helping me put my rusty fiat back on the road🤠
@SweetProjectCars 3 жыл бұрын
Thank you very much, it's our pleasure Zippy! Thank you so much for watching and sharing, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
@laschell59 3 жыл бұрын
Thank you. What is Blaster? Is it a brand name? I need to use this on my brothers Chevy truck . Its sat for years and only start the engine time to time to keep it new. Yes its a 350 out of a z camero 69 I did see that the engine that came out is a large nickel block. I never seen one until the rebuild. Now, I want to protect the body..of the truck. So thank you very much.
@SweetProjectCars 3 жыл бұрын
It's this amzn.to/2OTeLYF Thank you for watching and sharing, we really appreciate it! Hope you have a great day my friend. mad Mike the hammer SPC
@jimsmith8817 2 жыл бұрын
I made some using your formula and it works great. I’ve had a spray bottle on my shelf for about three mounts and I’ve noticed the blaster seem to form a sludge like material at the bottom. Sometimes if I shake it really hard some of it will remix partially. Have you experienced any thing like that. Thanks Excellent video.
@SweetProjectCars 2 жыл бұрын
Hello Jim, just shake it up good before you use it, everything will be ok. Also, try to use up what you mix within a couple of weeks as the shelf life isn't very good. Thanks for watching, have a great day my friend. mad Mike the hammer SPC
@mannysoto7643 2 жыл бұрын
It's the dawn that does that just take out the clumps and and fresh dawn
@davidfuller764 Жыл бұрын
@@mannysoto7643 thanks!
@elppedro77 2 жыл бұрын
Thanks for the tips!! Looks like 4oz of Blaster, 12oz trans fluid and 1oz of Dawn.
@SweetProjectCars 2 жыл бұрын
Our pleasure my friend. Thank you for watching, have a great day. mad Mike the hammer SPC
@microgreensgrower3946 2 жыл бұрын
@@SweetProjectCars He said this makes a total of 16 oz so since he makes it clear there is 4 oz of Blaster and 1 oz of Dawn there must be 11 oz of transmission fluid?
@Gretzky2857 Жыл бұрын
@@microgreensgrower3946 it has 12 oz ATF so it makes 17oz total👍🏼
@Mytwocentsisallicanafford 6 ай бұрын
What is blaster
@mrfxr1695 2 ай бұрын
@@SweetProjectCarsI apologise for asking, probably too obvious in US, but what is a blaster? I'm in UK and never heard about it, thanks
@charger19691 3 жыл бұрын
This is truly Sweeeeeeet! Thanks for sharing!
@SweetProjectCars 3 жыл бұрын
Glad you liked it! Thank you very much for the view and comment Danny! Hope you have a great week. mad Mike the hammer SPC
@3257bm 2 жыл бұрын
Love your videos! Thanks!
@SweetProjectCars 2 жыл бұрын
Glad you like them! Thank you for watching Michael, have a fantastic weekend my friend. mad Mike the hammer SPC
@Jeff_Seely 2 жыл бұрын
WTF? I'm genuinely impressed! I've used ATF and acetone mixed in equal parts before to free up bolts and it dissolves the hell out of rust! So I believe that it does work. It's the soap component that has got me blown away. I have to give this stuff a try.
@SweetProjectCars 2 жыл бұрын
You will love it, Jeff! Thank you for watching and sharing, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
@Robio1971 11 ай бұрын
I have been using ATF allot. I will try your trick out. I have also used chainsaw bar oil. I found the chainsaw bar oil to stick well.
@SweetProjectCars 11 ай бұрын
Thanks for watching and sharing Robio! Hope you have a fantastic day my friend. mad Mike the hammer SPC
@s.o.c_914 2 жыл бұрын
Thanks for this. Its going to work amazing in my toranardo gun..between your concoction and the way the Toranardo applys the chemical
@SweetProjectCars 2 жыл бұрын
Glad to help! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC
@MultiTaha007 2 жыл бұрын
How is it holding now ? Also did you undercoat?
@1flashlite1 3 жыл бұрын
I used a lawn sprayer and thank you!! How does transmission fluid affect the car's paint?
@SweetProjectCars 3 жыл бұрын
Watch this kzfaq.info/get/bejne/prN3e8Z8u9WWiZ8.html Thank you for your view and comment Rich, we truly appreciate it. Have a great weekend. mad Mike the hammer SPC
@MIKEYSREVIEWS 3 жыл бұрын
Goodbye Krown! Nice. Can't wait for the snow to melt.
@SweetProjectCars 3 жыл бұрын
Thank you for watching Mikey! Sorry about the snow :( Hope you have a great day. mad Mike the hammer SPC
@kylemlm 3 жыл бұрын
Mike, I wish I had this formula 30 years ago..Boat trailers showed the age. I was using Boeing T-9 and that stuff cost $$$. ..Thank you..
@SweetProjectCars 3 жыл бұрын
Thanks Kyle! Appreciate your view and comment! Hope your day is the best my friend. mad Mike the hammer SPC
@davetoth9767 2 жыл бұрын
This is terrific! Thanks so much fellas.
@SweetProjectCars 2 жыл бұрын
Our pleasure Dave! Thank you for watching and sharing, we really appreciate it, have a fantastic week my friend. mad Mike the hammer SPC
@h.d.mech.mortenson2098 3 жыл бұрын
Thanks for the video. Transmission fluid contains detergents which is why it’s used in a transmission.
@SweetProjectCars 3 жыл бұрын
Thanks for watching and sharing. Have a great day. mad Mike the hammer SPC
@h.d.mech.mortenson2098 3 жыл бұрын
@@SweetProjectCars welcome. Thanks for the great videos and tips !
@nabob14 3 жыл бұрын
The dish soap works because it breaks the surface tension allowing the fluid to lay flat and not bead up... works for almost anything you want to spray for coverage... even homemade herbicides like vinegar and salt... add dish soap and it keeps the solution from 'beading up'
@SweetProjectCars 3 жыл бұрын
Thanks for the info! Hope you have a great day! mad Mike the hammer SPC
@mikeyd717 Жыл бұрын
It's like flux for solder. Break the tension and allow it to pool
@Leatherstockingfella 9 ай бұрын
Surfactant
@whatsit2ya247 6 ай бұрын
@@Leatherstockingfella that's what she said 😅
@williamcharles9480 3 жыл бұрын
I used to work on those Altec boom trucks for the Jacksonville Electric Authority. They're quite an interesting and well designed piece of equipment, it should serve its ownership well if maintained properly. SPC: Thanks for another video that shows us how to make life a little easier and our battle against rust more easily accomplished.
@SweetProjectCars 3 жыл бұрын
It's our pleasure William! Thank you so much for watching and sharing your interesting info, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
@JimmySmith-xu5ot Жыл бұрын
What is
@JimmySmith-xu5ot Жыл бұрын
What did you say the orange one is n Smith 🇺🇸
@saber5010 2 жыл бұрын
After making the mixture you describe in this video, I realized that most of the rust on my car, which is above my windshield and roof is under bubbled paint. I watched another video you did where you injected PB Blaster into bubbled paint with a needled syringe. Can I use the mixture to do the same or should I use only PB blaster?
@SweetProjectCars 2 жыл бұрын
I would do the Blaster first, then do this process to keep it from coming back. Thanks for watching and asking Sheila, have a great weekend. mad Mike the hammer SPC
@barry009 3 жыл бұрын
Great video; can you use this mixture for undercoating?
@SweetProjectCars 3 жыл бұрын
You sure can! It's the best undercoating you can use and it's affordable on top of being able to paint after it's been applied unlike many others. Thanks for watching and asking B! Have a great day. mad Mike the hammer SPC
@billballard9685 2 жыл бұрын
Love your videos and watch all of them. For the rust proofing with the dawn, what is the Blaster you refer to? Is it one of your concoctions.? if anyone knows what's in it would you let me know? Thank you.
@SweetProjectCars 2 жыл бұрын
It's this amzn.to/2OTeLYF Thanks for watching and asking Bill, and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. mad Mike the hammer SPC
@billballard9685 2 жыл бұрын
Well I'm totally embarrassed! Turns out Canadian Tire carries PB Blaster. It's similar to WD-40. I tried it on my truck and cars various squeaks and noises, even grinding sounds Etc., and they immediately disappeared. So when it comes to making the rust proofing, it simply consists of transmission fluid, Dawn dishwashing liquid , and PB Blaster. And the blaster sold for Less than WD-40! I'm hooked on it. they also have a lubricant I'm going to try.
@eugg777 3 жыл бұрын
Those Harrison spray bottles work good.
@SweetProjectCars 3 жыл бұрын
We agree with you utuber! Thanks for watching. Have a great day. mad Mike the hammer SPC
@petercan1020 3 жыл бұрын
Ty for sharing all your great ideas
@SweetProjectCars 3 жыл бұрын
It's our pleasure Peter, thank you for watching my friend. Have a fantastic evening. mad Mike the hammer SPC
@capeman10 3 жыл бұрын
Another excellent video, thanks for the info.
@SweetProjectCars 3 жыл бұрын
Glad you enjoyed it, it's our pleasure my friend! Thanks for watching. Have a great evening. mad Mike the hammer SPC
@JasonTylerRicci 3 жыл бұрын
Fluid Film is my go-to. Problem is, it's just so darn expensive for how little you get. And it can take a few cans to do a whole vehicle. Could easily run you $30+ to do the job. Your alternative seems more cost effective. Thanks for sharing
@rolfbjorn9937 3 жыл бұрын
Buy the gallon.
@SweetProjectCars 3 жыл бұрын
Totally agree! Thank you for watching and sharing, we really appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
@jeanine0125 11 ай бұрын
I missed the 3rd ingredient..I got tranny fluid and dawn. What was the 1st?
@Note10plusAura 9 ай бұрын
@@jeanine0125He said "Blaster" ..I assume PB Blaster?
@jeanine0125 9 ай бұрын
@@Note10plusAura Thank you. Lol
@christophermuran9487 3 жыл бұрын
The blaster you mention, what exactly is it ? And maybe there is version available. Your vids are well detailed.
@SweetProjectCars 3 жыл бұрын
It's this amzn.to/2OTeLYF Thank you for watching and asking. mad Mike the hammer SPC
@jamesmichael3998 3 жыл бұрын
Nice of you to share these tips I understand the atf and dawn but what product is blaster thank you. Cheers from Jacksonville Florida
@SweetProjectCars 3 жыл бұрын
It's this amzn.to/2OTeLYF Thank you for watching and asking James! Cheers to you as well my friend. Have a great day. mad Mike the hammer SPC
@rpdube1 Жыл бұрын
I'm learning so much keep it up, maybe a stupid question but can this be applied with a sponge and applied to the exhaust and other moving parts/areas that get hot. Also i live in NH does this work as an undercoating? Thank you
@SweetProjectCars Жыл бұрын
Hello Robert, no such thing as a stupid question, yes you can apply it with a sponge, but we suggest keeping it off pipes and exhaust manifolds, and yes, it does work as an undercoating. Hope this helps, thank you for watching and asking, have a great day my friend. mad Mike the hammer SPC
@donjohnson3701 Жыл бұрын
Great info. I plan to make up a batch and use on the inside of my van’s door panels. I use dawn for removing grease before painting and it’s good for washing your greasy hands after working on the car (use something like cornhuskers lotion afterward because it will dry out your hands)
@SweetProjectCars Жыл бұрын
Sounds great! We're with you on the dawn, we do the same thing to wash hands after dirty work! Thank you for watching and sharing Don, hope you have a great week my friend and all the best on your project. mad Mike the hammer SPC
@Susan70003 Жыл бұрын
What's in that Corn Huskers Lotion? I put some of that on my hands right before I went to pick up my little grandson. He slipped right through my hands. I didn't have him that far off the floor yet as I went to lift him so he wasn't hurt but I was shocked that the huskers left my skin with no grip ability. That was the first and the last time I ever used Corn Huskers. Scary stuff.
@rev.w.santos2764 3 жыл бұрын
Yes, I've been using ATF for years on rust! Works well on all rust....
@SweetProjectCars 3 жыл бұрын
Great to hear! Thank you for watching and sharing my friend. Hope your day is the best. mad Mike the hammer SPC
@stevel1475 3 жыл бұрын
Using straight ATF, no mixing? How often do you reapply the ATF?
@rev.w.santos2764 3 жыл бұрын
Once a year!
@jessicac1101 3 жыл бұрын
Does the rust color go away? Or it stays
@davidfuller764 Жыл бұрын
@@rev.w.santos2764 thanks!
@r.perkins2103 5 ай бұрын
Funny thing you may like to investigate - My truck had leaf springs 20+ years old that were covered in Lime. Looked like putty or mud, but was almost white. I scraped all that off and the steel was perfect underneath and could still read the stamped part numbers on them. So does limewash prevent rust?
@spozz6633 3 жыл бұрын
So easy to mix it..full with instructions..but I'm still searching the ingredient to make one..tqvm for sharing mate..hope more useful videos for helping a lot of people like me(poor)😂😂
@SweetProjectCars 3 жыл бұрын
Our pleasure Spozz! Thank you so much for watching and sharing, we truly appreciate it my friend. Hope you have a fantastic day. mad Mike the hammer SPC
@speedy_pit_stop 3 жыл бұрын
Nice recipe. I used half-half ATF and melted petroleum jelly for consistency. Will try yours too.
@SweetProjectCars 3 жыл бұрын
Thanks for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC
@captainmorgan6035 2 жыл бұрын
Anything that will keep the oxygen away from the metal will stop it from rusting keep that in mind oxygen is what makes the metal rust, if only we could wrap a Ziploc baggie Around our vehicles and suck all the oxygen out wouldn’t that be great
@thelazyhandyman8581 3 жыл бұрын
I heard something similar to this works well to loose rusty bolts. Use 50% real acetone and 50% ATF (automatic trans fluid)
@SweetProjectCars 3 жыл бұрын
Thank you for watching and sharing, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
@randydeskins9359 9 ай бұрын
It is great. Only thing is the acetone will evaporate if not in a sealed container. Best penetrating fluid that I have found.
@steve345 3 жыл бұрын
I live in Florida and have been looking for a video on how to remove rust from gel coat on a boat, and prevent the supposedly stainless screws from causing anymore rust issues. Maybe you have done one and I missed it but if not I was curious if you had any idea how to take it remove it?
@SweetProjectCars 3 жыл бұрын
Here's two videos kzfaq.info/get/bejne/jr1npKqgttS-iKc.html & kzfaq.info/get/bejne/bbWqhdhnmq2ueo0.html that if you do either one of them, it will make your hull shine like crazy. Then use this goo.gl/Eqjnp3 to keep it from ever rusting again. Thanks for watching and asking Steve. Hope you have a great evening. mad Mike the hammer SPC
@Nico_335i_DCT 3 жыл бұрын
Thanks for sharing guys. Dutch regards, Nico.
@SweetProjectCars 3 жыл бұрын
Our pleasure! Thank you Nico! Hope your day is the best. mad Mike the hammer SPC
@Mooseracks 10 ай бұрын
The frame on my toyota tacoma was supposed to be replaced...based on Vin and recall notice... When the dealership inspection was completed, the said my frame wash n perfect shape and does not need replacing... Oh, and they asked " who applied the undercoating " I did it myself with a secret formula
@SweetProjectCars 10 ай бұрын
That is sweeeeeeet Mooseracks!! Great work my friend! Thank you for watching and sharing your results, hope you have a fantastic day. mad Mike
@rburns562 3 жыл бұрын
Landscaping tip. Add dawn to roundup. It will make it stick to anything you spray.
@SweetProjectCars 3 жыл бұрын
Thank you for watching and sharing Ron! Hope you have a great day. mad Mike the hammer SPC
@Marcoosianism 3 жыл бұрын
Roudup is an ecological and biological (including humans) poison. Please find an alternative.
@timothyandrewnielsen 2 жыл бұрын
@@Marcoosianism nah
@channelview8854 Жыл бұрын
Roundup spray adjuvant based on ammonium sulfate will do more good. Even better in drought conditions or on more mature weeds.
@colew.5956 3 жыл бұрын
FANTASTIC INFO! 👏👏👏
@SweetProjectCars 3 жыл бұрын
Thank you very much my friend we appreciate that, mad Mike the hammer SPC
@drywaller12345 3 жыл бұрын
& wishing you a safe & happy time. Thanks Bill
@SweetProjectCars 3 жыл бұрын
Same to you! Thank you for watching Bill, we appreciate it my friend. Have a great day. mad Mike the hammer SPC
@jons5898 3 жыл бұрын
Gracias for your diligence Hoolio with an H !!
@SweetProjectCars 3 жыл бұрын
Our pleasure! Thank you for watching my friend. Have a great day. mad Mike the hammer SPC and Hoolio too :)
@mr.cookie7308 3 жыл бұрын
You mean Julio?......Hoolio is not a name....so is Whoolio lol.
@oxyfee6486 3 жыл бұрын
Mike I am tired of winter here in Canada ,it makes even simple tasks a pain.As i have said before I have painted Timberjack, Skyjacks,John Deere,Caterpillar.I wish I could be there to help you my friend,for all you have taught me it would be a honour.
@SweetProjectCars 3 жыл бұрын
Thank you so much David! We would welcome you here in Florida my friend. The sun is out and it's a beautiful day today :) Take care. mad Mike the hammer SPC
@dmprdctns 3 жыл бұрын
Well done...! Thank you!
@SweetProjectCars 3 жыл бұрын
Our pleasure! Thank you for watching and commenting, we really appreciate it. Have a fantastic day. mad Mike the hammer SPC
@charlesmckinley29 2 жыл бұрын
Thanks, came back to get the amounts.
@SweetProjectCars 2 жыл бұрын
Glad we could help, Charles! Thank you for watching and sharing, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@paulsosa1872 3 жыл бұрын
This is genius great for boat trailers thanks for the tips 👍
@SweetProjectCars 3 жыл бұрын
Glad you like them! Thank you very much, we really appreciate it Paul! Thanks for watching, hope you have a great day. mad Mike the hammer SPC
@theandersons777 3 жыл бұрын
I'll try this. Question. If you've been using this why do you have so much rust ?
@SweetProjectCars 3 жыл бұрын
Answer. We purchased this truck in the condition you see, we are doing a refurb series to show people how to purchase, repair, then sell for profit a vehicle. If you go to the SHOW MORE of the videos description you will find links to all of the videos starting from the beginning, check it out! Have a great day. mad Mike the hammer SPC
@jonathanyates5198 3 жыл бұрын
@hector nadal did you not read his comment, or just wanting to be an ass?
@brianjohnson4616 3 жыл бұрын
brillant! Way to go Julio...
@SweetProjectCars 3 жыл бұрын
Thank you very much Brian! We appreciate the view and comment. Hope you have a fantastic day my friend. mad Mike the hammer SPC
@bobanmilisavljevic7857 3 жыл бұрын
Is there any concerns of the liquid starting on fire if hot spatter from welding hits the concoction? I can't wait to try this out. I have had some success with vinegar but this is really exciting. Thanks for the video
@SweetProjectCars 3 жыл бұрын
You use common sense anytime you are around oils and you're using flame or sparking of any kind. Of course you keep them separated. mad Mike the hammer SPC
@rickowen3860 2 жыл бұрын
@@SweetProjectCars ,can you tell me what is the BLASTER you use in your RUST KILLER mixture ? Thanks, Rich Owen, not able to find commet area on my phone !
@evanchen1124 2 жыл бұрын
There’s a link in the caption info. I didn’t click it yet but it’s there
@That_Handle 3 жыл бұрын
👍 Sounds promising. Look forward to the follow-up vid. [Rewinding to get that mix ratio/additive measure now....]
@SweetProjectCars 3 жыл бұрын
Thank you! Cheers! Hope your day is the best! Thanks for watching my friend. mad Mike the hammer SPC
@kevinshea7260 3 жыл бұрын
How does it dry, does it stay tacky and pick up dirt over time? I’m wondering if I could use this instead of cosmoline as a winter undercoat.
@SweetProjectCars 3 жыл бұрын
You sure can use it, it's the best stuff you will ever use I promise, it will outdo anything on the market. It doesn't do anything like stay tacky and pick up dirt, we only put out videos that really do work, hence our 700 videos. Thanks for watching and asking Kevin, we appreciate it. Have a great evening. mad Mike the hammer SPC
@birdssurfshed 2 жыл бұрын
This is terrific!
@SweetProjectCars 2 жыл бұрын
Glad you liked it my friend! Thank you for watching and sharing, have a great weekend. mad Mike the hammer SPC
@zombieapocalypsecherokee9224 3 жыл бұрын
Wow very cool I have a 03 suburban and there is some serious rust underneath I was going to use Corroseal but now I'm using this method. I really like that you can spray it safely everywhere not so with the Corroseal Thanks for sharing 😁👍
@SweetProjectCars 3 жыл бұрын
Glad we could help! Thank you for watching and commenting! Hope you have a great day my friend. mad Mike the hammer SPC
@zombieapocalypsecherokee9224 3 жыл бұрын
@@SweetProjectCars Yes liked 👍and subbed and saved to my Suburban videos. Can't wait to do this I live in the rust belt and I'm going to be bringing the Suburban on the beach this summer so I want to address the rust issue before hand. Thanks again for sharing this will be a massive help 👍😁✌
@zombieapocalypsecherokee9224 3 жыл бұрын
@@SweetProjectCars Hey Mad Mike I'm getting read to do this to my suburban I just have a question can I spray undercoat over this and if so is there any preparation like drying time for the mix or can I just spray over it ? Thanks in advance 😁✌
@Marcoosianism 3 жыл бұрын
Zombie: Corroseal would work differently ... use it if you want to attack the rust problem and convert the rust to a paintable surface then paint it. If done correctly it should stop any future rust, as long as your surface was prepped right, the corroseal applied right and your finish coat of paint applied right. SPC's concoction is to prevent further rust UNTIL you decide to attack the problem, not INSTEAD of attacking the problem.
@TheJoeFletch 3 жыл бұрын
Great timing with this video! I've noticed a bit of rust on the undercarriage of my car, so getting right to this! But I have a question. What do I do with the gallon of WD40 that I have? haha
@SweetProjectCars 3 жыл бұрын
Well, you will continue to find areas to use your wd40 :) Thanks for watching. Have a great day. mad Mike the hammer SPC
@garychandler4296 2 жыл бұрын
Just don't start thinking it's a freakin' lubricant, like so many deluded people do. Oh, it almost IS, for 2 days if it doesn't rain!
@superque4 3 жыл бұрын
*A follow-up in a year or so would be greatly appreciated.*
@SweetProjectCars 3 жыл бұрын
We will await your video results! Thanks for watching. mad Mike the hammer SPC
@superque4 3 жыл бұрын
@@SweetProjectCars No. I was hoping YOU would post a follow-up video in a year or so showing how well your rust killer held up.
@Lar_ry 2 жыл бұрын
If this works so well how did it get that bad in the first place? Any follow up video? Thanks in advance!
@marlonalva 3 жыл бұрын
Great video! Hey, question for you, will Gear Lubricant works just like the Transmission fluid? Thanks
@SweetProjectCars 3 жыл бұрын
No it will not Marlon. But you can use whatever you want to use, we are just sharing what we know works after 40 years experience and testing multitudes of different products. Thank you for watching. Have a great day. mad Mike the hammer SPC
@marlonalva 3 жыл бұрын
@@SweetProjectCars Good! Thanks for the great videos! 👍🏼👍🏼
@hitmann8420021 3 жыл бұрын
Really good information
@SweetProjectCars 3 жыл бұрын
Glad it was helpful! Thanks so much for watching and sharing Jeffery, we appreciate it my friend. Hope you have a great day. mad Mike the hammer SPC
@dunnkirke 3 жыл бұрын
You’re talking, I’m staring at the snake.
@SweetProjectCars 3 жыл бұрын
LOL, this made us laugh this morning :) HA! He's a good conversation piece for sure. Thanks for watching (the snake) and being here with us Kirk. Hope you have a great day. mad Mike the hammer SPC
@exibuchay1695 2 жыл бұрын
When I was a kid somebody told me how they did it back then. Way back then. They would use a sprayer and spray the entire under carriage with transmission fluid. And then drive down a Dusty Clay Road. Really fast. And that would coat all of the transmission fluid and hold it in place. Poorman rustproofing right there
@SweetProjectCars 2 жыл бұрын
Thank you for watching and sharing, have a great day. mad Mike the hammer SPC
@ericberg7364 2 жыл бұрын
You can be sure I will be doing this to my daily driver 12yrs old & 66000 miles . On and off road in Wisconsin, still a solid 4×4
@SweetProjectCars 2 жыл бұрын
You'll be glad you did Eric! Thank you for watching and sharing, hope you have a great weekend. mad Mike the hammer SPC
@ronbell802 Жыл бұрын
My daily driver is 20 yes old over 400thousand miles doesn't use oil still going strong
@truthhunter3538 3 жыл бұрын
Thanks Great Video!
@SweetProjectCars 3 жыл бұрын
Glad you liked it! Thank you for watching and for your comment my friend. Hope you have a fantastic evening. mad Mike the hammer SPC
@mattjenkins2362 8 ай бұрын
Zep Acidic Toilet Bowl Cleaner quickly removes rust. Its powerful 10 percent Hydrochloric Acid gel formula enables the cleaner to dissolve the heaviest rust buildup. The thick gel clings to vertical surfaces. I am a Machinist with over 30 years experience and I am super picky, trust me buy a gallon of this for about $13 and you will never use anything else for removing rust again.
@SweetProjectCars 8 ай бұрын
You can use whatever you want to use we are just sharing what we know works and is safe for both you and your vehicle. Have a great day. mad Mike
@MarcussBakerify 3 жыл бұрын
Can this be used as a preventative for rust or just for active rust spots?
@SweetProjectCars 3 жыл бұрын
This stops rust, no matter what the situation is, so Yes to your questions. Thanks for watching and asking, hope you have a great evening. mad Mike the hammer SPC
@jayarnold5727 3 жыл бұрын
This is just what I needed,have 2010 utility body truck,and the bottoms of all the doors are starting to rust . thanks Mike.
@tilowol Жыл бұрын
Thanks for the video I just did on my f150 under the truck corners bumper
@SweetProjectCars Жыл бұрын
Good job! Thank you for watching and sharing, we really appreciate it, have a great day my friend. mad Mike the hammer SPC
@gardenstateflatlandb 28 күн бұрын
Can Liquid Wrench be substituted for the PB Blaster? Asking cuz I have plenty of Liquid Wrench. Got some rist eating at the rear subframe of one of the cars and would like to, at the very least, slow it down.
The Ultimate Expedition
Рет қаралды 1,4 МЛН
Project Farm
Рет қаралды 1,8 МЛН
Sweet Project Cars
Рет қаралды 81 М.
Cafe Racer Garage
Рет қаралды 2,4 МЛН
AC Designs Garage
Рет қаралды 101 М.
The Hamilton Collection
Рет қаралды 1,8 МЛН
Eidan Sanker / Don’t Touch My Car
Рет қаралды 21 МЛН
VOSTOK TRANSIT
Рет қаралды 464 М.