Thank you for the video. I have always what to know how to do that with that 90 min. Hot mud. I'm going to try it now on jobs I do. Also, I have pick up on lot of your videos. That has made my jobs go very well. I've in the building and remolding business for 45 years now. Always learning new ways. Thank You again your videos have always been helpful and to the point.

I've been spilling water on the floor for years. But I always learn something new from your videos. Great tips!

With this particular brand you use, put your knife (the one you used to open the bag) vertically in the bucket, and pour water into the bucket around an inch under the handle. That is around the amount of water needed for a full bag of quick set.

Thanks for the videos from Upland California.

I love Vancouver Carpenter! super helpful !!! from South Korea.

I've always found a 2 parts powder to 1 part water a pretty good mix, little thick but for most applications it works well and it's easy to have a couple a cups of any size to measure with, just depends on how much you want per batch.

Perfect timing! I have 1500 sq foot basement to pre-fill and a bag of pro-set 90!!! Always great videos!!!

now that i have learned how to spill water on the floor, i feel ready to tape ! XD

Thank you for your videos. I have been a carpenter for over 20 years and I have avoided taping and mudding as much as I can, until.........well, now, when I don't really have a choice. The remodel requires quite a bit of new drywall furred out to meet old plaster, new gang boxes, closets, pantries, etc....It was time to tackle my "fear" and hesitation to tape and mud significant amounts of drywall. I came across your videos and I I can't thank you enough for your transperancy, honesty, sharing of your skills, and taking the time to make these videos. I am much more confident in my skills and I have to say that after watching your videos and putting the tips and tricks to work, and by just doing the work, it looks better thank I could have imagined. THANK YOU!!!!!!!

Great video! Whale tail is nice too for camera work

Good job this work i have experience 5years All roundr from 🇮🇳🇮🇳 Indian

for any home owner/diyer's like myself, you can get a 2 gallon bucket for mixing small batches (less waste/more working time) and they are easier to clean out when you are done. the ones from the premixed mud work great.

My favorite channel! Keep up the great work!!!

Pretty good and quick tutorial and this works good with 90 minute in that amount, but I usually prefer just to tape and bed with 20 minute in small batches, mix with hot water if possible and you’ll be able to finish coat with some nice thinned down bucket mud same day. Or 20 all the way if you’re doing small repair jobs, learn how to “wet sand” with a good smooth rag and you can knock out a decent size repair and have it painted same day $$$

You'd think, with 4 kids I wouldn't need a video on how to spill water on the floor, but alas, here I am. Lol! Thanks! This helped so much maybe I can finally finish my boys' room with a minecraft block wall.

I believe the correct word is slake, which is to quench a thirst. After mixing you let the mud sit for a while (5-10 minutes) while it continues to absorb water until its capacity to do so is slaked. I've heard masons and others use the word "slack" for almost 50 years but I think this is a case of learning by rote (the guy who taught me said slack, so that must be right).

Thanks for the video, what’s the elmers glue for?

The drill has survived possibly thousands of mixes and keeps right on ticking. Dewalt makes a perfect mixer even if caked all over with drywall mud.

Awesome i started mudding my house. first time. If I can give a tip bud.. I had a water hose setup outside with a nozzle..so that when I ran out of mud in the bucket..i rinsed it out and cleaned my knives.. TIME SAVER..!!! Went back in and mixed another batch of 90 minute.. REPEAT.

Good video brother blessing

Good video

Love my 5 minute mud 😎😍😎😍😎

Can you use hot mud to skim walls and ceilings.

@Vancouver Carpenter at least it wasn't 20 min mud you were mixing this time as you were talking to the camera for 5 mins.😉

Please do an overview of the types to use, for example quickset to tape so one can 2nd coat the same day, vs taping mud. Also a comment below suggests quickset for fiberglass and mesh tape, is this your experience? Thanks as always for another great video!

If you mix it too thick it will set faster. I've had a clean batch of 90 minute become unusable in 10 minutes just because it was to thick.

help, what do you do with the cleaning bucket of water? It has harden compound pieces etc. so probably not down the drain.

Director, can I use 90 to apply some thickness? Is it solid? Can I mix colors with it or on top of it? I want a material close to Venetian plaster. What do you advise me? Thank you for everything you provide.

Or does the TDS give measurements to mix this stuff. I’ve never bothered to looked. 😝

I wish my mud came out this smooth. I do exactly what you do and I always have the chunky clumpy runner special. So annoying…

I've found the 90 not great for taping,you talked muds and adhesive properties, so now I ad a splash of weldbond into the mix and have excellent results.

Please do wear a mask; we want to see more videos from you :-)

does lemon juice slow down setting with out causing harm???

rollin in vancouver

👍

Why are those hung vertically?

Nice

Have you ever tried mixing topping compound with 5 minute mud? Sands easy and sets up fast. About a 60/40 mix ratio. 60 being topping compound.

Different types of mud confuse me so much. I've heard so many people , I think including you, say that you tape with all purpose mud or a taping mud. And this is the first I've seen somebody mention taping with quickset. So now I'm just even more confused 🙃

How do you dispose of the mix water used to clean tools? ...down the drain?

ben, not even using the contractor's mask right below his chin! ;)

VC... Please explain why you are using 90 min mud now verse 20min mud verses regular mud for taping?? Just trying understand when & where & timing for using the different types of mud!! Thank you for your Videos. Waiting for your new carpentry Video in the future..Keep up the good work. See you on your next video!!

Feather the right amount of mud mix into the bucket......

I already know homeboy.

I thought you had to add glue to quickset for taping.

term is slake it rhymes with rake

Slake not slack, but close lol.

Why is he a carpenter if all he does is drywall?

Its slake, and that little tab thingie is actually a little spout. If you unfold the upper corner of the bag just so, you can pull out the little spout. But truthfully...its pretty useless....always gets clogged!

Slake, pronounced slayk.

An "actual" bucket.

First

If you’re gonna make a tutorial you really should be wearing a mask when you mix dry ingredients.

This channel has ZERO editing skill.