How to Operate The Van Norman Flywheel Grinder.
Рет қаралды 10,070
8 жыл бұрынBasic Operation of a Van Norman Flywheel Grinder. How to Mount, Grind a basic flywheel and a stepped flywheel. The most common way to use a Van Norman Flywheel Grinder. This video is from the Manufacturer of the Van Norman Flywheel Grinders.
@eddiekulp1241 Жыл бұрын
We had a Van Nornan grinder in our shop . Did tool and cutter grinding mostly
@robertemmons2260 4 жыл бұрын
We have this model machine at our shop. At the 3:44 mark it appears that the head locking lever is disengaged, shouldn't the head be locked before setting the depth gauge? The lever on our machine is nearly at a 90 degree angle when locked and vertical when unlocked.
@lynborchert7823 4 жыл бұрын
The head locking is tulock side-to-side motion. The depth gauge is to set the depth of cut on an auto grind unit. For best accuracyit would be best to lock the column first then set your depth of cut however it's not absolutely necessary you can do these in either order and still have a successful grind. Also for best accuracy you should not rely on the
@lynborchert7823 4 жыл бұрын
Machines depth of cut setting. A dial indicator and flat bar are the better way to make your measurements and use the machine settings only to get close to the desired depth.
Immersed
Рет қаралды 119 МЛН
Goodson Shop Supplies
Рет қаралды 1,6 М.
Australian Clutch Services
Рет қаралды 6 М.
Jim's Automotive Machine Shop, Inc.
Рет қаралды 133 М.
Tuyet Quyen
Рет қаралды 10 МЛН
Truck Drive
Рет қаралды 18 МЛН