How to paint a car at home and get clean results with minimal dirt nibs and high gloss

Рет қаралды 8,137

Speedokote refinish network

4 ай бұрын

Пікірлер: 70

@walterwitt1383 4 ай бұрын

Garage... Booth... Close your eyes couldn't tell where this one came from... Nice work. 😀

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks bud!

@hanknipper3921 4 ай бұрын

Another great video from the master! Great job Marco

@speedokoterefinishnetwork4937 4 ай бұрын

Appreciate it!

@fredc8618 4 ай бұрын

The hose wipe tip is great!! I never thought of that thanks again brother

@speedokoterefinishnetwork4937 4 ай бұрын

Yes! Helps a lot!

@deliveryguyrx 4 ай бұрын

Hell to the yeah! Another home run!!

@speedokoterefinishnetwork4937 4 ай бұрын

I try!

@angelmorales220 4 ай бұрын

Amazing job Marco.

@speedokoterefinishnetwork4937 4 ай бұрын

Much appreciated man!

@JohnWD40TC02 4 ай бұрын

Great job as always Marco, it came out really nice considering the conditions you are working in it looks very clean and the gloss is spot on👏👌👍John UK

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks for watching John!

@fredc8618 4 ай бұрын

amazing work as always

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks bud!

@mississippiwrenches295 4 ай бұрын

Nice one it’s definitely slick for sure and I do be forgetting sometimes to wipe that hose the smallest details are the most important part 👍🏾👍🏾🔥🔥

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks man!

@tonychristiano 3 ай бұрын

Ill give it to ya you can pull that trigger pretty damn good . Looks nice . Some painters dont understand when mixing paint that picking the right hardeners and reducers for the surounding temperatures is so critical . Good to see you make that a point in the video . BTW i subscribed

@speedokoterefinishnetwork4937 3 ай бұрын

I try man and thank you ! Remember it's make cars GREAT again not make cars perfect again 🤣🤣 we show real world results on this channel

@tonychristiano 3 ай бұрын

@@speedokoterefinishnetwork4937 How long you been painting ?? And do you do it for a living and have your own shop or do you work for one ?? Just curious.

@speedokoterefinishnetwork4937 3 ай бұрын

@@tonychristiano I have a mobile repair company.. all of the KZfaq videos are just messing around hobby stuff..I go out and buy cars and paint for fun . Iv been painting a long time if I include my teenage rattle can years about 20 years

@tonychristiano 3 ай бұрын

@@speedokoterefinishnetwork4937 I did mobile repair / car lot stuff 25 years ago we used a turbine paint setup . they work great . they use kinda like a shop vacuum for air no compressor needed . kzfaq.info/get/bejne/bduHeLShqs61dnk.html

@debcolbert3543 4 ай бұрын

Nice job!!

@speedokoterefinishnetwork4937 4 ай бұрын

😎😎😎😎😎

@itzmejav995 4 ай бұрын

Speedio at it AGAIN !!!! with my favourite colour!!!! Hope all is well going to spray a silver tommarow...❤❤❤❤ nuff love bro

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks man

@seanfalter9903 4 ай бұрын

Nice work my man! Nothing wrong with some bondo, always works in a pinch 💪👊

@speedokoterefinishnetwork4937 4 ай бұрын

Yes hey fixed is fixed 😂😂😂

@michaelmason5136 4 ай бұрын

Like always Great job

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks!

@danielmcqueen1024 4 ай бұрын

Marko, that mirror shine is The Bee's Dee's :) Love seeing the wet floor which here in the Northern Rio Grande Valley is a must! Even water down my walls and floor, dust happens all over in hours!

@speedokoterefinishnetwork4937 4 ай бұрын

Wet floor really helps a lot! IMO

@diamonddetails9445 4 ай бұрын

Like you said before, Boss, use this on VERTICAL PANELS, and the HS CLEAR on hood, roof n trunk. Makes sense 😮 TYVM as always 🙏

@speedokoterefinishnetwork4937 4 ай бұрын

Yup not a bad idea! This stuff is great for vertical panels cause it sets up quick does not run almost ever

@jamesquinnie7573 4 ай бұрын

Excellent Job ❤💪👏👍🏻👌💯

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks brah!

@clean24v 4 ай бұрын

Clean job

@speedokoterefinishnetwork4937 4 ай бұрын

Thanks!

@itzmejav995 4 ай бұрын

I know that should not be a issue i used a single stage to base a new bumber... going flat the area and put a base coat. Is 600 grit okay.. dont want any scratch mark showing in the clear

@speedokoterefinishnetwork4937 4 ай бұрын

600 is great

@itsturbinetime 4 ай бұрын

Yo Marco! I must have missed it in the video. Did you use a fast activator during this session? I was thinking medium with a splash of slow activator would help me wet out these budget jobs. Having some minor issues with chasing that wet line when using medium activator with smr1150. Doing full paint jobs.

@speedokoterefinishnetwork4937 4 ай бұрын

Fast activator for cold weather, Medium and slow for hotter temps

@itsturbinetime 4 ай бұрын

Can the Slow Urethan Grade Reducer be used with smr 1150 clear coat? Just wondering how wet I can get it. Just a splash, or am I smoking that crack again? @@speedokoterefinishnetwork4937

@TheIrvingsylva 4 ай бұрын

I’m an at home DIY kinda guy and unfortunately having a HVLP set up isn’t feasible and wish there was more content that addressed using LVLP usage….Thanks for all the content you do give us tho

@speedokoterefinishnetwork4937 4 ай бұрын

I can do more lvlp stuff in the future if you like!

@speedokoterefinishnetwork4937 4 ай бұрын

Subscribe to my page and I'll do a lvlp video in the next 8 weeks deal?

@scottiencali 4 ай бұрын

How soon after you painted did you do the clear? I missed it.

@speedokoterefinishnetwork4937 4 ай бұрын

Honestly not long about 10 min.

@jmsxmedia1364 4 ай бұрын

What air pressure do you have set on your compressor sir and also on the gun? I am currently using Eastwood lt100 but will be investing on the new Blackwidow HTE gun from Harbor Freight for the next project. Thank you.

@speedokoterefinishnetwork4937 4 ай бұрын

I have a gun coming out that is going to be the exact same in quality but less $ .. I sell my own brand of guns.

@speedokoterefinishnetwork4937 4 ай бұрын

Also I was spraying at about 23-24 psi

@lal6390 4 ай бұрын

@@speedokoterefinishnetwork4937sorry to jump in , but when do you think you’ll have gun out by?

@speedokoterefinishnetwork4937 4 ай бұрын

@@lal6390 spring 🙂 you guys will all be super happy

@robertjaramillo144 4 ай бұрын

does this clear coat hold up over time?

@speedokoterefinishnetwork4937 4 ай бұрын

Very durable to UV sun rays!! 3 coats for maximum protection bud

@D4x4Bronc 4 ай бұрын

How much was that base paint per gallon

@speedokoterefinishnetwork4937 4 ай бұрын

This base per gallon is pretty expensive. Around 600-800 through SPEEDOKOTE, and 400-500 using Axalta. Both good stuff but SPEEDOKOTE out edges the completion as always. I'll put that stuff against any base coat in the world

@oby-1607 4 ай бұрын

Looks great to me. That clear sure laid flat.

@speedokoterefinishnetwork4937 4 ай бұрын

It lays real nice

@joshr3687 4 ай бұрын

sounds like its raining , marco

@speedokoterefinishnetwork4937 4 ай бұрын

No runs this time 🤣🤣🥴🥴

@stevenpignataro7991 4 ай бұрын

Is it an overall clear or spot clear?

@speedokoterefinishnetwork4937 4 ай бұрын

Actually both depending on the activator you get. Multi purpose.

@3rekoatskustoms929 4 ай бұрын

Look dang gone good to me

@speedokoterefinishnetwork4937 4 ай бұрын

Hey not bad right 🤣

@stevec5657 4 ай бұрын

Hey Marco. I've had good luck doing blends, but did a metallic silver one yesterday and dusted the base too close to the tape line. The lighting wasn't the best at the time, so I didn't catch it until after clearing and I now have an old to new color line. Any suggestions (or do a video?) on how to fix this? Thanks!

@speedokoterefinishnetwork4937 4 ай бұрын

Scuff door down real fast gray scuff and blend into next panel that might help

@stevec5657 4 ай бұрын

Ok, thanks 👍

@johnbrigman8444 4 ай бұрын

I use the SMR-42 on all my clients cars. Wanted a more budget friendly clear. Debating on what speedokote to use. What do you think? I even thought about the fast clear on overalls. Btw Mark what pressure and gun settings are you using on the 1150.

@speedokoterefinishnetwork4937 4 ай бұрын

@@johnbrigman8444 smr 1150 requires less pressure because it's lower solids so around 16-21 psi. But I really don't pay to much attention to pressure these days