Super nice!!!! I have a Civic EK I am trying to "restore". The closer I get to the paint process I purposely find another "issue" to fix, before I paint it! It's a daunting process! lol But, I decided on speedokote clear! Now I have to figure what brand paint and primer! lol What do you recommend using as paint and primer to have speedokote go over? Thanks! Charlie-
@speedokoterefinishnetwork49378 сағат бұрын
@@c.a.2227 hey buddy we sell everything you need including paint and primer ! Drop me an email [email protected]
@xpacmaner2322 сағат бұрын
8 litre air compressor can still apply two panel doors? or need 25 litre?
@kirkniles418422 сағат бұрын
I’m planning my first ever paint job on my second gen dodge Got some hail dents on the hood roof and finders… Plus a few years ago I hired the wrong guy to paint it and he sure messed up the whole truck so it’s time to start from bare With bare metal should I use etching primer?
@speedokoterefinishnetwork493721 сағат бұрын
Yes for sure Speedokote selles the smr225 it sprays super super flat and perfect for bare metal applications. If ordering off the site select me as your rep (Marco)
@kirkniles418421 сағат бұрын
@@speedokoterefinishnetwork4937 doing a root beer single stage…what color primer?
@speedokoterefinishnetwork493721 сағат бұрын
@@kirkniles4184 ss2790g speedokote primer apply 3 coats over the smr225 Block flat . Try not to burn through primer anywhere. Block sand primer up to 600 grit Ready for paint
@michaeloflaherty7189Күн бұрын
NOT ONLY THAT!! But you POISONED ALL the land around the area! if you washed this off into your grass area and you have cats or dogs or kids - bad move! that' stuff is TOXIC!! it's better to have stains that that stuff.
@speedokoterefinishnetwork493721 сағат бұрын
So how would you suggest we clean the concrete?.
@lynntankersley4837Күн бұрын
what about clear coat over the single stage black? wouldn't it be deeper black?
@speedokoterefinishnetwork4937Күн бұрын
@@lynntankersley4837 iv seen people do this aswell
@connectedmusic444Күн бұрын
Is they’re a paint code for this? Is this a darker nardo grey to the audi? I’m looking for this exact same dark nardo grey can’t find it anywhere
@BearBudgetTurbineКүн бұрын
Ain't no Hunday or Honday soundin' like that, Bubba!🤠💯🇺🇲🇺🇸
@CAVEENOКүн бұрын
MY MAN WOULD YOU PLEASE TELL ME HOW LONG TO WAIT UNTIL SPRAYING THE CLEAR AFTER PAINTING THE CAR? You da man
@speedokoterefinishnetwork4937Күн бұрын
@@CAVEENO depending on temps 15-30 min
@kq27992 күн бұрын
That banner gonna be flyin' until 2028...
@adriantho65152 күн бұрын
can i do 4 parts acetone and 3 parts paint ? and add hardener?
@johnnycashh71482 күн бұрын
If you didn't drive that on the 4th.... you like Joe Biden!!! 🇺🇸 😅
@JT-yl7my2 күн бұрын
where is this guy located to buy cars?
@ginfizz202 күн бұрын
How did you paint that without masking the headlights??? What kind of gun did you use? HVLP or LVLP?
@speedokoterefinishnetwork4937Күн бұрын
@@ginfizz20 we did mask lights for basecoat stage . Then peeled tape and paper for clear coat stage to clear coat everything in one shot
@deliveryguyrx2 күн бұрын
Hey Marco, how much for the Ford truck?
@LynxAltiar112 күн бұрын
I love so many things about this video. 😂 MAGA
@HarborDavidson2 күн бұрын
That's The Way A Hot Rod Supposed To Sound,,,fk all this computer shit these days.
@davidharrison83972 күн бұрын
Nice....old school is always cool ! Let's go Brandon...FJB !!🇺🇲🇺🇲🇺🇲
@thetrailoutthere2 күн бұрын
Like glass!
@MoparRinagade2 күн бұрын
This car would cure ED in seconds!
@user-mk3gd9cx7n2 күн бұрын
Nothing special here.
@laithbot63182 күн бұрын
I’d rather have the Del Slo 😂 but they both sick
@Davegodfrey032 күн бұрын
The bumper, door and hood lines look like 💩. Seriously, they are horrible.
@MegaGuitarpicker2 күн бұрын
Let’s go Brandon! Love it! Nice ride!
@Denverairsoft68902 күн бұрын
This is music to my ears 🔥🔥🔥
@seanfalter99032 күн бұрын
Let’s do a giant burnout!
@scottpetroff57532 күн бұрын
🔥
@contractor5562 күн бұрын
Love every second of the video!
@talpidaesaltatrix48392 күн бұрын
I've been binging your videos and i'm looking forward to the day i get to paint my old pickup, did you ever do a video about small compressors?
@speedokoterefinishnetwork49372 күн бұрын
@@talpidaesaltatrix4839 absolutely. Have a video up painting my old Acura TL with a 6 gallon compressor
@frankjames40542 күн бұрын
Marco, you came through! Nice video man! That car looks great. I remember these from the 90’s for sure. I graduated high school in 97’ and there were plenty of these in the parking lots 👍🤘 You hit every mark 👍💪👍
@speedokoterefinishnetwork49372 күн бұрын
@@frankjames4054 I tried man!!
@darlenedutt50452 күн бұрын
What did you put on before primer
@speedokoterefinishnetwork49372 күн бұрын
@@darlenedutt5045 adhesion promoter
@darlenedutt50452 күн бұрын
What happens when you have like lines like the plastic was scratch after you put coats of primer on it ?
@animefreak.7744Күн бұрын
probably u didn t sand it off well enough
@user-nv8tz5xk1d3 күн бұрын
Im see if i take you my 06 accord to get it done better
@speedokoterefinishnetwork49373 күн бұрын
@@user-nv8tz5xk1d who did it to begin with ?
@user-hz4uu8dh6r3 күн бұрын
Nice video thank you.
@lakepointmachinery19423 күн бұрын
Why did the turning off of the circulation fans and hour after last coat cause runs in the clear?
@speedokoterefinishnetwork49373 күн бұрын
@@lakepointmachinery1942 a lot of paints rely on airflow to dry properly. If paint ain't drying .. it's running One thing iv learned lol
@lakepointmachinery19423 күн бұрын
@@speedokoterefinishnetwork4937 makes sense. Thank you very much for your quick reply. West of Ireland. 👍🏼
@GreekGodEddie3 күн бұрын
i though you needed a smaller grit to get rid of the yellow
@speedokoterefinishnetwork49373 күн бұрын
@@GreekGodEddie nope 1500-2500 usually always does it
@michaelarthur6784 күн бұрын
Looks pretty darn good.
@siliconvalleyengineer58754 күн бұрын
wow fantastic popping paint job, well done sir. your meal choices are worrysome brother.
@Ronco1604 күн бұрын
Beautiful del sol I have a 94 si in black in the garage. I haven’t drove it for 3-4 years. I’m getting the itch to get it back on the road.
@speedokoterefinishnetwork49374 күн бұрын
Do it !
@debcolbert35434 күн бұрын
Nice job! The car looks great 😊
@eastcoastken4 күн бұрын
I just put the T6 Maxspeedingrods in my 07 Civic. Just the rears for now because the shocks were blown out and I need tires & an alignment before I do the fronts. Obviously I'll do the alignment after I install the coilovers tho.
@rhrm17104 күн бұрын
Do you hear any knocking in the rear?
@eastcoastken4 күн бұрын
@rhrm1710 no, been a week now.
@rhrm17104 күн бұрын
@@eastcoastken thank you for the update
@JohnWD40TC024 күн бұрын
Your car is looking really good Marco and the paint has a good finish on it, that's the beauty of flow coating as you now have plenty of clear on there to wet sand and polish it then it will look brand new again👏👌👍John UK
@sinformant4 күн бұрын
I really appreciate you putting all this work into my del sol for me😉
@speedokoterefinishnetwork49374 күн бұрын
@@sinformant 🤣🤣🤣
@hanknipper39214 күн бұрын
It looks pretty damn good Brother!
@speedokoterefinishnetwork49374 күн бұрын
Yea for no wet sand or buff and it's almost half a decade later id say so !
@user-ce8vb1sb6y4 күн бұрын
Car look great.
@speedokoterefinishnetwork49374 күн бұрын
Thanks !
@seanfalter99034 күн бұрын
Nice update, very nice results! Hope you are kicking back a little this evening, happy 4th and TRUMP all the way!
@speedokoterefinishnetwork49374 күн бұрын
Trump 2024 Make America PRO AMERICA AGAIN
@teirahbolden66874 күн бұрын
Just sanded my car to start either painting or wrapping and you drop this? Def a sign
@speedokoterefinishnetwork49374 күн бұрын
Paint! If you order anything off the site select me as your rep (Marco )