This guy is seriously one of the best people in the business, i called to get a custom paint in cans a few years back which no other shop could do, not only did he get the exact colour but also sent me photos as he was mixing to make sure he was spot on. I wish you all the best in this build and will be following this the whole way though. Thanks again for your amazing work!

really don’t get why you aren’t 10x as popular, you put a ton of effort into these videos & you captivate the watcher the whole time

Not gonna lie when I read the title expected the usual bodge "painted on the car" type job. But just goes to show you put the time and effort into removing the brakes, prepping and masking correctly you can achieve good results even with a set of aerosol cans. Excellent job.

Those calipers look beauoooootiful! Outstanding job. Now I'm off to tackle this all by myself. Wish me luck.

Thank god finally someone who uses the stickers as a masking tape rather than leaving them on there to get burnt off.

Great video on painting, just one important thing to note as a mechanic to never paint mating surfaces like on the face of the brake disc or surface for caliper bolts. The paint will collapse over time and cause the part to become loose (wheel or brake caliper). Actually very important, however many repair shops still paint them, we just have to buff it off.

One of the thing that just blew my mind away that tricky thing with the stickers... u just give me a lot of ideas my friend..... love your video....

It's the attention to the smallest details that have the greatest effect. Those calipers and rotors look superb! Good on ya mate! 👍

Congrats on the new car. Best looking STI made. Cant wait to see more videos on it.

Those rotors and calipers look amazing. I honestly didn’t think they would look that good!

Very professional work, thanks for the video.

FInally someone who uses the good shit instead of autozone specials. Thank you a ton for this!

Nice choice of STi,Dave! Love the calipers too.Welcome back!

Awesome paint job on brakes and rotors!!!!

Great job, and lovely colors. Keep it up!

Was really confused by paint over sticker. after finish, wow! This is how it’s done properly.

Wow, love the color of the brake calipers. Great video! Thanks!!!

Hi Dave, watched lots of your videos, all have great content! This is the best one yet! Can't wait to see the next instalment!😀

Nice car new project can't wait to see more you did a great job on the calipers and disc thank you for the video

Wow a beautiful job. Well done!

That is a beautiful job on those calipers!!

I’ve just used VG paints to paint up my brake calipers on my Mazda RX-7. The Brembo red is fantastic and it’s completely transformed the brakes. First time painting with 2k clear and I love the shiny result. Will be purchasing more stuff from these guys in the future. Might even give that colour shift stuff a go on some radio control gliders that need refinishing 👍 Thanks for making this stuff available in Australia.

Awesome video and new car. My favourite model of sti too! ❤️

Great vide calipers look awsome great colour

Great to have you back Dave!!

Very good job..... They look fantastic..

Great finish 👍

Man O Man" those Calipers look fantastic, in that tangerine candy 💥 Gheeesh🤗

very like this paint job.

Thank you very much for your video sharing, which allowed us to get to know and learn more！

Glad to find a video that is a proper job removing the calipers. I want to color match my calipers the Honda Milano Red. That red is available from DupliColor Perfect Match which is an acrylic lacquer. I was thinking I could possibly get that paint to hold up to the heat if I used specific for calipers primer and clear… but those are all enamels and was worried about putting acrylic lacquer on enamel. I might just be over thinking things… but this video made me feel I can just use an etching primer and 2K clear… so going to give it a shot. The car is just a weekend cruiser… not getting to extreme braking temperatures.

That turned out amazing! Also, sweet car man. Now I really want to redo my calipers!

Nice car and nice job man. Didn't even like the color choice at first and then when I saw them on the car, I was like .... I need this in my life!

Looks great sir 👍👍👍

Looks great!

You sir are a pro and a joy to watch!

Amazing man will be doing my car aswel. It will be a slow restore but it will get there. Wish I had more room tho. Home restores are a pain lol

Fantastic you took all steps didn’t cut corners

That came out 🔥🔥🔥🔥 af!!! Nice!!

Love the blobeye STI. I have one myself. Don't have the space to spraypaint my calipers myself - apartment life sucks - but someday I will take them off and get them powdercoated. Deciding between STI cherry blossom candy red, or just a more pearly/candy stock gold color. Looks absolutely killer - that black pearl was crazy.

Great job bro!

Awesome work ✨👍👍👍🇦🇺🇦🇺

Thanks for the video Dave. It's been too long since your last video.

These came out sick bro

That typo at the end had me rollin. Bloody great job!

U did a great job

Great video! I'm looking to do the same!

Great video Dave, just remember to never paint on mounting surfaces. It's dangerous to paint any mounting surface for wheels or brakes etc as the parts can not be tensioned correctly. The paint will not give a perfectly flat surface and can cause the parts to lose tension as the paint wears from contact. If these surfaces are painted then you simply need to sand them back to bare metal. If you look at factory painted calipers and discs you'll find these mounting surfaces bare or possibly with a strong bonded coating eg on discs. As a mechanic though, I love your customising videos.

My god those are gorgeous

Just amazed! :D

Man those look good!!!

This is a awesome video dude! Your jacked btw! Keep it up your a amazing content creator

Cant wait for more videos on this car

Excellent 👍 👏

Damn good work 👍

That color is sick

Wow amazing 😲😲😲

You can now buy Car-Rep 2K clear in Australia. It has unlimited shelf life and activates as it leaves the nozzle and not in the can.

You can also use compressed air to pop the pistons out of the caliper

Yeah the skids. Just like the original Custom Spray Mods videos. Brakes look awesome.

damn that blobeye looking good on black

Damn they look killer!🤜🏻🤛🏻 another way to paint the slots. You can grab a touch up paint pen and clear coat pen ( sold in pairs most times ) and just draw a line in the slot with the pen then go over it with the clear pen when dried. But still leave you with the hubs face n outer vents to deal with.🤷🏼‍♂️ either way killer job man 👌🏻👏🏻

Can you do a follow up video on this on how well your paint method has held up after a year or so?

Clean work . fo sho

Looks great! I have the same DBA rotors too! But I was wondering, are the rotors/disc brakes the same dimensions for the 2004 WRX to the STI? I'm asking because i think one caliper is seizing and trashed that one rotor. I went ahead and ordered some gold Brembos brake kit and comes with regular slotted rotors. I want to maybe replace it with DBA ones again if the dimensions are the same

lovely!!

Man, if the slots on the rotors had that same tangerine color to match the calibers. Whoa!

Keep up the vids bro 👌💯

Thank you ! I learned more from your video than i have searching all over the web on painting my brembos. Like what clear coat and primer to use for adhesion and durability. Etch primer sounds very promising and 2k clear sounds just like what i need for high use high temp resistant with solvent protection. Would you know if 2k holds up against brake fluid ? I dont plan on being haphazard when bleeding my brakes, but I've heard that if so much as a drop gets on a painted caliper, it would eat through its paint immediately like acid. I think im just going to go with the kit on the linked site in your description. To take out all the hunting and guesswork.

Great video, amazing results. Can we get this paint in the USA? If not, what would you use instead?

Beautiful. Wish they made a true fluorescent yellow /green. Can find powder but none in a spray can.

kinda cool.... ! not sure why you would replace stuff after you painted it ? seems back wards ?

We missed you, man.

I have the power. Became the 1000th person to like this video haha. Great job on the caliper respray too. Silly question btw, why didn't you use a paint stripper?

Nice👍

Dave, its nearly been a year since you posted this video. Can you give us an update on the disc paint? Cracking, embedded brake dust, rust? Thank you for your tutorial.

Awesome color!! Great video. Does the one kit cover both the front and rear callipers?

Love the color! What is the color name /code?

Look amazing dave! is there a lazy way to paint the calipers without removing them?

it is a beautiful car

Wow looks gr8! How many cans u need for all cars rotor and calipers

Nice job!!! Question: is the Miracle Paint similar to POR-15?

Nice job. Did you flush the brake fluid out completely?

Nice job.

You should of showed how to bleed the calipers so that juice doesn't get on all your beautiful work! I use clear tubing to bleed them and keep the juice off anything i don't want destroyed. Just a thought.

Sexy paint job man 👌👍🔥

Hi bro u recommend power coating better then paint cans

You should have left the mating surfaces clean. Now the paint wil wear on those surfaces that might loosen the wheel bolts/ nuts.

Won't those brake calipers get red hot when doing hard braking on a hot day? Did you need to use a high heat paint so it does not bubble or peel away from high heat?

Hey bro you must know alot about rotors so here's my question lol what cause grooves on the rotors and a lil bit of shaking while braking I have the r1 concepts with the ceramic pads ...

Looks awesome brother, little spell check error @ 3:24 mins with " 3 coats Silver BaseCOATS" not Baseoats! Keep the vids happening mate, I miss the tips and tricks!

How long before you add the clear to prevent wrinkles?

Curious, wouldn't leaving black paint on the disc slots eventually peel off from heat and adhere/contaminate the brake pads?

Hey mate, can these kits be used to paint rocker covers and other high heat engine parts as well, or is there another kit for something like that? Cheers mate, love the vids.

Wowowiwa

👌👌👌

Does this last longer than powdercoating. Coz honestly the calipers can get really hot and start to chip off!!

Missed you, please do leather seat painting again, maybe there’s a newer method or something

So I want to paint my calipers a certain color and they don’t offer it as a high heat paint. So my question is can I use a high heat primer and clear but use a regular dupli color spray.

Do yuo remeber how lon time it took to paint them?