How to pass a Large Re-Anchor WITH a Casualty

How to pass a Large Re-Anchor WITH a Casualty - IRATA Rope Access Level 3

Рет қаралды 11,538

Күн бұрын

Building on the gained skills from the last couple of video's we are slowly getting out of the standard exercises and into the Level 3 territory. Today I will show you one method of passing a large Re-Anchor with a casualty or the Large Re-Anchor Rescue. The challenge we face here is that we need to ascend a bit with a casualty attached to us.
Have a look and tell me what you think 😃
Video's referenced to:
Rapid Ascent Descent System: • Rapid Ascent Descent S...
Rescue from Ascent: • How To Pass and Rescue...
Large Rope to Rope with a Casualty: • Rope to Rope Transfer ...
The HIDDEN danger of passing a Re-Anchor: • The Hidden DANGER of a...
Thanks to Peter for hanging around🙏🏼🙏🏼
Check out his Instagram and firefighting shenanigans here:
/ peter_03_86
Like and SUBSCRIBE. Turn on notifications to never miss a new upload!
If you have any questions and/or suggestions, ask away in the COMMENTS :-)
This video is sponsored by:
Industrieel Klimmen - bit.ly/3uomQr4
Your one stop shop for all things rope access.
Use coupon code: TRAC at checkout for a €20,- discount with any purchase of over €100,-
Connect on:
Patreon: bit.ly/3K6Qc1u
Website: www.theropeaccesschannel.com
Email: connect@theropeaccesschannel.com
Instagram: / theropeaccesschannel
Twitter: / theropeaccessc
Facebook: / theropeaccesschannel
Dapro Safety 10% Discount:
For almost 10 years I have been using Dapro Safety Workwear. They were the first company I encountered who made coveralls specifically designed for rope access. Pockets in all the right places, longer than standard legs and more room to move you arms. Great quality and durability too.
If you follos this link and use code " RopeAccess10 " You get 10% discount
bit.ly/dapro-trac
lineGrip lineScale 3
www.linegrip.com/?ref=TRAC
A revolutionary digital all-in-one bluetooth dyno / load cell. PPE certified, 1280Hz fast, 30kN WLL, and unique onboard-logging of up to 50 hours. The huge load eyes and 90kN breaking strength make it perfectly suited as a generous master point for any type of rigging challenge.
LS3 Affiliate discount code:
Use code TRAC-w22-XuV on checkout to get 2,5% discount!!
Use for any purchase on Linegrip and support the channel
My favorite software to create images of my rigging to support in training, web, video and work method statements:
VRigger!
vRigger.com/?RC=RC0135
Use code TRAC10 for a 10% discount! :-)
Make sure you enable cookies!This code changes every month so if it does not work for you, shoot me an email or DM on IG/FB/Twitter and I'll send you the correct one
I use Tubebuddy to manage this channel:
www.tubebuddy.com/LXB
Chapters
0:00 Introduction to the Large Re-Anchor with a Casualty
0:15 Large Re-Anchor situation explained
1:10 Starting with the backups
3:07 System explained
5:03 What kind of pulley system?
5:30 Moving to the Re-Anchor
8:20 Part 1 done and rope management
10:00 Rope to Rope Transfer
11:27 Sponsored Message

Пікірлер: 32

@academiadeacessopordacordas 4 ай бұрын

Muito bom! Excelente técnica. Obrigado pelo vídeo.

@TheRopeAccessChannel 4 ай бұрын

🙏🏼🙏🏼

@Gogubutelie Жыл бұрын

Thanks!

@TheRopeAccessChannel Жыл бұрын

Thank you!!! I really appreciate this!🙏🙏🙏🙏

@A-Randomer Жыл бұрын

I'm glad I'm not the only one who does that when you end up using an old style ID having used the newer version or a new style RIG for a while. It's an interesting training issue especially when using one to ascend its very easy to forget to lock it off. I know you should always check it has actually locked off with any device but it's very easy to forget when you are used to the newer devices.

@TheRopeAccessChannel Жыл бұрын

You are absolutely right. It is an interesting issue indeed. It is a good thing that forgetting to unlock it is less danger than forgetting to lock it. I have seen people who were trained with the new ID's only never locking of theirs because they were never taught. That is why I find it good to train with the older ones. Same goes for the asaps.In the real world I encounter a LOT of old ones instead of the Lock version. And the same people struggling with older ID's struggle with the old ASAPs..

@aerialrescuesolutions3277 Жыл бұрын

@@TheRopeAccessChannel Well said. The only infraction I got on my level one test was for leaving the handle unlocked. I have the newer one that auto locks. The instructor told me the same thing you just said about the climbers forgetting to lock the handle. Although I was fully aware of the need to lock the ID, I forgot during the rescue on ascent. Jim

@TheRopeAccessChannel Жыл бұрын

@@aerialrescuesolutions3277 The most important part was you passed 😜.

@andersfrederiksen5811 Жыл бұрын

Great video! Looking forward to bench watch them all when preparing for my L3

@TheRopeAccessChannel Жыл бұрын

By then most of them should up👍🏼👍🏼

@TheRopeAccessChannel Жыл бұрын

If you have any specifics you want to see, you know where to find me👊🏼👊🏼👊🏼

@jgeronimo4051 11 ай бұрын

Awesome 👌 I'm still L1 for 9 years

@TheRopeAccessChannel 10 ай бұрын

🙏🏻🙏🏻 thanks! Best job ever!!

@talltomrich1 Ай бұрын

What kind of pulley system? It’s a theoretical 2:1 with a change of direction. The pulley is at the load so it’s an even system and there is only one moving pulley. But with the friction of the I’D it’s even less than that.

@heliumfreak5364 Жыл бұрын

Those Petzl descenders that dont have a spring loaded handle should all be thrown in the bin :) hate using them, the new ones are so much better.

@TheRopeAccessChannel Жыл бұрын

They are perfect until you need to step of a windturbine or building with 100 mtr of rope beneath you.. The weight of the ropegets pulled through to easy and on the old Rig and I'd, you could easily lock them of..

@heliumfreak5364 Жыл бұрын

@@TheRopeAccessChannel well it's funny you should mention that because I work as a blade technician and on some jobs I have been given the ID without the locking handle which you have to open to ascend. With all your gear on, the stretch on the rope, tools, in a seat and anything else you are carrying trying to climb in the old ID is awful 😅

@TheRopeAccessChannel Жыл бұрын

@@heliumfreak5364 ascending in an id sucks anyway😂. But seriously have you not had issues where the rope just slide through because of the weight. Whereas with the old ones you could just lock it off?

@Porkchop1312 4 ай бұрын

@@heliumfreak5364why would you spend all that effort on climbing on your id unless it's very short distance. But if you're doing blade repairs or installing 3m tape/polytech.. just use the croll and get yourself a foot ascender like a Pantin. Easy peasy and way less hard your the body in the long run

@jlr551cfd 2 ай бұрын

I see you’ve got a Progress Adjust on your handled ascender!!! What do you think about that setup???

@TheRopeAccessChannel 2 ай бұрын

Good?! most of the times. SOmetimes it gets in the way. and sometimes I want that adjust somewhere else

@jlr551cfd 2 ай бұрын

Fair. I just started playing around with that setup… I think it may prove more bulky than useful? I also have another Progress Adjust free on the other side.

@rodolphocunha4695 Жыл бұрын

Very good! could make a rescue on a zipline

@TheRopeAccessChannel Жыл бұрын

Do you mean if I could make a video on Zipline rescues? Or I could have used a Zipline for this rescue?

@rodolphocunha4695 Жыл бұрын

@@TheRopeAccessChannel you can make a zipline rescue video

@TheRopeAccessChannel Жыл бұрын

@@rodolphocunha4695 that is planned for later this year. We will get into all kinds of tensioned lines setups👍🏼

@antonioavilamartin2102 8 ай бұрын

Can you take the ascenct ropes and carrie with you

@TheRopeAccessChannel 7 ай бұрын

Yes, if they are long enough. But why would you want to do that??

@ericwiese Жыл бұрын

3:1 Since you're the load

@TheRopeAccessChannel Жыл бұрын

Thank you 🙏🏼🙏🏼 But if you are the load, aren't you suspended in only 2 ropes (in and out of the descender)... If someone on the ground would pull the tail end is it the same? (asking for a friend😉)👊🏻👊🏻

@ericwiese Жыл бұрын

@@TheRopeAccessChannel I'm late to the party, but your weight is actually suspended on three strands (in and out of the descender and the pull strand coming out of the roll clip.) If your friend is pulling from the ground it would be a 2:1.😉

@TheRopeAccessChannel Жыл бұрын

@@ericwiese exactly👍🏼🤩😃. You got it. The theory of perspective on it is also an interesting way of looking at it