BOOK HERE www.fly747.de/
✈️FUTURE PILTOS MASTERCLASS✈️ bit.ly/4bnceeW
📗📗📗GET MY NEW BOOK amzn.to/32TH4x7 📗📗📗
INSTAGRAM FLYWITHCAPTAINJOE: goo.gl/TToDlg
MY WEBSITE: goo.gl/KGTSWK
-----► MERCHANDISE CJ SHOP goo.gl/Svrqmx ◄ ------
NEW FACEBOOK PAGE: goo.gl/heUKGb
----------------------------------
00:00 Intro
00:56 What is the FMA
01:51 Autothrottle and Thrust REF
04:19 HOLD mode
05:20 80 knots Callout
06:27 100 Knots
07:07 V1 Callout
08:06 V Rotate
10:01 Airbourne 50 feet LNAV engaged
11:38 400 feet VNAV engaged and Thrust REF
12:35 1500 feet thrust reduction and acceleration
13:59 Retracting Flaps
14:47 After take-off checklist
15:42 Outro
Preparation:
Preflight Inspection: Prior to initiating the takeoff procedure, the flight crew conducts a thorough preflight inspection of the aircraft. This includes checking all systems, control surfaces, engines, and ensuring the aircraft is in airworthy condition.
Cockpit Setup: The pilots enter the cockpit and prepare for the flight. This involves setting up the flight management system (FMS), programming the route into the navigation system, and configuring the autopilot and other flight instruments.
Briefing: The flight crew conducts a pre-takeoff briefing, discussing the departure procedure, runway, weather conditions, and any other pertinent information relevant to the flight.
Takeoff Procedure:
Taxiing: The aircraft is pushed back from the gate or starts its engines at the parking stand and taxi to the assigned runway. The pilots communicate with air traffic control (ATC) for taxi instructions.
Pre-Takeoff Checklist: Prior to entering the runway, the pilots run through a pre-takeoff checklist, which includes items such as setting the flaps to the appropriate takeoff position, verifying engine parameters, ensuring flight controls are free and correct, and setting the autothrottle.
Lineup: Upon reaching the runway threshold, the aircraft stops and lines up with the centerline. The pilots verify the runway is clear and obtain clearance from ATC for takeoff.
Thrust Application: The pilots advance the throttles to initiate takeoff thrust. In the case of the Boeing 747, which typically has four engines, the throttles are advanced simultaneously or sequentially to achieve takeoff power.
Acceleration: As the engines spool up and produce thrust, the aircraft begins to accelerate down the runway. The pilots monitor engine parameters and ensure the aircraft is tracking straight along the runway centerline.
Rotation: At a predetermined airspeed known as rotation speed (Vr), the pilot flying (PF) gently pulls back on the control column to raise the nose of the aircraft. This action initiates the transition from ground roll to flight.
Liftoff: As the nose is raised, the wings generate sufficient lift, and the aircraft becomes airborne. The main landing gear leaves the ground, and the aircraft climbs away from the runway.
Climbout: After becoming airborne, the pilots retract the landing gear and continue climbing away from the airport. They follow the departure procedure as instructed by ATC and navigate towards their planned destination.
Conclusion:
Performing a successful takeoff in a Boeing 747 requires precise coordination between the flight crew, adherence to standard procedures, and meticulous attention to detail. From preflight preparations to liftoff, each step in the takeoff procedure is critical to ensuring a safe and efficient departure.
Thank you very much for your time! I hope you enjoy this video!
Wishing you all the best!
Your "Captain" Joe
Intro Song:
Lounge - Ehrling: www.youtube.com/watch?v=a5ImN...
Outro Song:
Joakim Karud & Dyalla - Wish you were here www.youtube.com/watch?v=UXrxB...
ALL COPYRIGHTS TO THIS VIDEO ARE OWNED BY FLYWITHCAPTAINJOE.COM ANY COPYING OR ILLEGALLY DOWNLOADING AND PUBLISHING ON OTHER PLATFORMS WILL FOLLOW LEGAL CONSEQUENCES