How To Polish A Car For Beginners - First Time Guide to Paint Correction

Рет қаралды 390,244

Күн бұрын

How To Polish A Car For Beginners - First Time Guide to Paint Correction. If your a beginner looking to polish a car then this guide should help you. Polishing a car can be daunting and complicated for beginners or first time polishers.
Learn to polish you car here.
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
Products used
Cheap wash mitts
amzn.to/2CeF96S
Sealey LED360CM from £45
amzn.to/2xjAmhf
79p ZOOMABLE LED Flashlight Torch
amzn.to/2xuV2C2
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
(try discount code "forensic" for 10%)
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Пікірлер: 534

@yogibreen 3 ай бұрын

Careful, comprehensive and personal. A joy to watch and a go-to channel for this subject. A great help. Thanks John.

@ForensicDetailing 3 ай бұрын

I appreciate that thx you sir

@simonw2189 4 жыл бұрын

I have recently started watching your videos, the research and details you go into in your videos is amazing. You are extremely passionate and very knowledgeable about your job. A credit to the industry.

@douglaslippertindy 5 жыл бұрын

One of the best "intro to polishing" videos on KZfaq. Thanks so much for sharing your experience and knowledge with all of us.

@rdnews5245 3 жыл бұрын

les-ag-svvñzgñ

@tauren224 4 жыл бұрын

Polished for the first time this weekend, thank you for the confidence!

@FontainMotorsLtd 3 жыл бұрын

A pleasingly plain-english introduction to a field usually completely full of jargon. I found your video really useful, thank you.

@constantdarkfog49 5 жыл бұрын

Very helpful DA polisher demo, great tips, Thanks. I just got my first DA polisher, so your information will really help me get started on my car.

@stuarth902 5 жыл бұрын

Top guide Jon. I also used your original video to guide me thro my first attempt at machine polishing. It was a great myth buster & I'm sure encouraged others like me to just "have a go". This one builds nicely on the original. Cheers

@EazyDuz18 5 жыл бұрын

John its a travesty that you dont have more subs and views. Its clear you have a huge passion for this, and are incredibly thorough in your reviews and instructions. An absolute credit to the detailing community in the UK. I see you mentioned and recommended all the time on Detailing World and its obvious why. Been watching for a long time and enjoy every minute. Keep up the good work

@ForensicDetailing 5 жыл бұрын

cheers mate very kind. the channels always been for the purests and not the wider YT audience. getting views on YT is a dirty business. could write you an essay on that. I respect channels that hold back from playing that game, not many do.

@steverabbits 4 жыл бұрын

I could not agree more, what a star this guy is!

@spilsuk 4 жыл бұрын

Yep couldn't agree more - hes been my daily watch during lockdown. This channel has certainly helped over the last 8 weeks , great information, without any of the rubbish. Love the unbiased views and no over the top delivery of information. I can just leave John on in the background whilst I'm working from home and absorb his knowledge. I feel John has become my best friend during Lockdown. I think my girlfriend is worried I'm spending more time with John than I am with her :D

@allywndavies5531 4 жыл бұрын

The more detailing channels I watch the more I realise where they get their information from. They all using glossmeters and test panels and doing tilt tests and chemical resistance tests. This is where it all started.

@Orchy500 5 жыл бұрын

Awesome video John. I'm a complete novice and not yet delved into machine polishing. Your videos are just brilliant, a great level of detail and honesty. Will probably wait until spring before i get my first DA but will do so much more confidently with your advice to refer to. Thanks for all your hard work. In the meantime, think I'm going to grab some TAC Systems moonlight to see me through the winter.

@abuhamza1970 5 жыл бұрын

Amazing video Jon, thanks for your no-nonsense straight talking approach to demystify what can be sometimes a very confusing subject. Might be worth you chatting to some of your suppliers to package up a bundle of starter products for us novices to get us started. Thanks again

@3261carl 4 жыл бұрын

Great advice, I went out and bought everything in this video upon your recommendation. I’ve never done a machine polish before but this single stage with the Shcoll S20 the results I achieved are better than I could every of imagined far superior to that of a hand polish. The paint now looks like new again. Thank you 😊

@Hornihorse456 5 жыл бұрын

everything you need to know. great content. as an amateur enthusiast these are my go to vids.

@Ffish69 5 жыл бұрын

Subb'ed, added to favourites, and will probably return several times to remind myself how to do things properly! Excellent, informative, and easy to follow - top stuff!

@rosc4321 4 жыл бұрын

Super vid, thinking about buying some kit to start looking after my weekend toys. A lot of really great information. Thanks for taking the time!

@martinharman574 5 жыл бұрын

What a great video, one of your best. Im thinking of going through the process with my X3 M40i but may leave it until spring as it has been well waxed since new back in March

@73kokitch 5 жыл бұрын

I’m interested in getting into car detailing as a hobby and I’ve watched many videos, but your videos were the most interesting and detailed i saw so far. And on the top of all that it seems that you’re BMW fan. So thanks for all the effort you put in your videos!

@zaink7037 5 жыл бұрын

You should go for it 👍. The reason I went into car detailing was when I used to take my first car to a hand car wash once a month and seeing the paint badly swirled. Jon's videos helped me chose the best products and how to clean a car properly and safely. Then went into machine polishing which was scary but the results were really good. BMWs have hardly any plastics exposed which is great as there's nothing for waxes and polishes to stain into.

@SuperPramFace 5 жыл бұрын

Fantastic video Jon! Thanks for the time and effort, really enjoyed it

@TheRhodes76 4 жыл бұрын

Awesome thanks John, I'm really enjoying all your informative videos👍 I'm really getting into detailing more and more to the point I want to do a detailing course so learning as much as possible 👍👍 Keep the videos coming buddy 👌

@xraylax 5 жыл бұрын

Doing your utmost to keep as much abrasives away from the paintwork as humanly possible. Then i noticed the Dartboard! LOL Great vid Jon

@ScrappersDetailing Жыл бұрын

Very nice detailed video. Super helpful to someone like me who is suffering analysis-paralysis trying to pick the "perfect" tools to paint correct my car....

@Playingbyear 4 жыл бұрын

A masterclass in getting your paintwork tip top. I feel inspired to buy myself a DA polisher and buff up the old truck. Many thanks 👍🏻

@chriscoralAloha 3 жыл бұрын

Yup. Did it. Used all I learned here. My 2000 astro panel van work Truck looks tip top. I definitely recommend it.

@chriscoralAloha 3 жыл бұрын

I have been channel surfing for a good car Polish and detail tutorial. You do a great job. Very descriptive with many tips. Thank you for sharing your experience with us. Very educational.

@ForensicDetailing 3 жыл бұрын

Glad you liked it

@andras19821982 3 жыл бұрын

Just bought a 2 year old Audi which I would like to take care off but just can’t stop watching your videos, would love to have your knowledge of detailing

@markhodgkinson8431 Жыл бұрын

Brilliant video learnt so much every video I learn more and more, the videos are shot really well , keep up the good work

@kgotlaetsilemodieginyane7491 3 жыл бұрын

This was a great tutorial / lesson. I like how you explain specific aspects of products and tools that you recommend. I relay admire your teaching. Thank you.

@ForensicDetailing 3 жыл бұрын

thank you sir for the kind words means a lot to me.

@obsidiandetails4105 5 жыл бұрын

Really comprehensive. Love your videos and the effort you go to in order to provide good quality info. I am a fan of Bilt Hamber and Koch Chemie products also. Thanks John

@ForensicDetailing 5 жыл бұрын

thanks for the kind words really apprecaite it

@anthonyfairthorne380 5 жыл бұрын

Funnily enough i re-watched your original version last night. Now watched this one too. Thanks for taking the time to share this information!

@Jahmed5635 4 жыл бұрын

Would love to see more videos like this John, they’re brilliant

@coolhandxxx 4 жыл бұрын

Top banana, so as an amateur I have been using Meguiars ultimate compound, polish and wax and there was never a mention of degreasing after the polish so thank you for the top tip. 🙏🤓

@garrytalbot3456 5 жыл бұрын

Well this is one worth watching a few times. Great stuff once again.

@huthmanjagun2639 11 ай бұрын

Awesome, my first time to try machine polish, tons of information!

@robtweed1596 4 жыл бұрын

Brilliant video and covering so much....just great...thank you 👍

@thomj32 2 жыл бұрын

Great information, as I will be doing this on my own I think offering just a stage one for now as I imagine most customers will want car back after one day

@ASCarvings 5 жыл бұрын

Another great vid jam packed with useful information. Well done Sir.

@davidhammond3738 3 жыл бұрын

Hello John... well.... what can I say. I love car detailing. I’ve got my little pride and joy in the garage. I had it all booked in for a machine polish, but with lockdown 2 and plenty of time on my hands, I’m going to take your advice, get on line and go for it myself. Thankyou for your inspiration, advice and of course your time for passing over this valuable information. All the best. Stay safe.

@ForensicDetailing 3 жыл бұрын

good luck dave you will do a great job mate take your time and enjoy it.

@steverabbits 4 жыл бұрын

What a brilliant video! First time I've come across your KZfaq channel and I am immediately impressed. At last, a proper Brit telling it as it really is. I'm fed up listening to Americans shouting at the top of their voices and talking at a million miles an hour! They have good videos but ruin them by never taking a breath 😂 I have only discovered the joys of detailing my own cars in this last year and this information is EXACTLY what I needed to encourage me to go further so thank you VERY MUCH John, great job, I will be watching every single one of your videos from today onwards, epic job mate!

@ForensicDetailing 4 жыл бұрын

thank you steve welcome aboard mate.

@waynedunne4838 5 жыл бұрын

As always brilliant video, very informative and helpful mate 🙂

@SSS1k26 5 жыл бұрын

Thorough thorough thorough video. A very easy watch!

@MP-dq7wb 4 жыл бұрын

What a fantastic and informative video. I'm new to the detailing world and have watched many vids now but none as complete and concise as this one. Thank you John. Your presentation, knowledge, and enthusiasm are great! i'm a subscriber now and Forensic Detailing is my 'go to' source for information. Well done for producing and taking the time to pass this on. All the best, Mark

@oleglvl 4 жыл бұрын

Thank you, sir. Wish you all the best. Cool and useful video.

@brianiswrong 4 жыл бұрын

Just found this. Thankyou for a master class aimed at average individuals,rather than a bunch of nerds or people who choose fairy liquid over happy shopper washing up liquid for a " well shiney finish".

@hypojames 5 жыл бұрын

I use fairy liquid / dish soap on the decontamination wash with Menzerna 3 in 1 on the cheap dual action. Works a treat on the old bangers I've been bringing back to life. Not perfect results but so effective for time, cost and effort put in.

@glenpeters2261 5 жыл бұрын

very honest and informative as ever john, just wondering if you have thought of updating your winter prep video on the back of this with any recommendations on new products for the winter months

@ForensicDetailing 5 жыл бұрын

I just have not really got any new recomendations really glen. theres some specific products I want to check out very soon and will be going into detail on some sealant products very soon.

@guyapps6463 3 ай бұрын

Outstanding, thanks for the great advice

@SteveE293 5 жыл бұрын

Why would anyone dislike this video . The time, effort and honesty invested to make this is epic

@ForensicDetailing 5 жыл бұрын

part of the deal with YT :) 4 dislikes for 15,000 views is pretty good strike rate though :) not that uncommen to get more dislikes than likes on YT.

@eddiejoseph9062 3 жыл бұрын

What a wonderful tutorial! Thanks so much, John.

@ForensicDetailing 3 жыл бұрын

You're very welcome

@Ian-ky6hm 4 жыл бұрын

Hi Jon, great video as usual. I'm thinking of getting myself my first da polisher. I've watched all your videos covering the das6 pro das6 pro plus etc but what would you recommend a good machine would be for a newbie? Many thanks and stay safe 👍🏻

@andrewstamps2806 3 жыл бұрын

Sir you are a star!!! The best no messing but incredibly factual master of detailing out there. Thankyou buddy such a brilliant channel 😊🌈

@ForensicDetailing 3 жыл бұрын

Wow, thanks andrew appreciate it

@andrewstamps2806 3 жыл бұрын

No worries buddy its great the time you give and put into your channel plus its interesting too, great luck to you and Cheers!! Andrew 😊🌈

@rossmorrow3013 4 жыл бұрын

Dear Sirs, THANK YOU SO MUCH for such a superfast, and also most helpful and informative reply. I’ll follow your advice to the letter. Again, please accept my sincerest thanks. Yours truly, ross

@richardseem7948 5 жыл бұрын

truly nice to listen to some1 who knows what he's talkn about...great video u would love Brian at apex detailing on utube. another top notice detailer and great friend..

@deanbennett5343 5 жыл бұрын

Yet another very informative video. Great work.

@mercmush 4 жыл бұрын

You could offer a GCSE in this area ! Thank you for the upload and all the carefully thought out advice.

@paddymcgrath605 2 ай бұрын

Great video. Never tried Quantum pads, ordered some today.. unfortunately white is out of stock.. butnlooking forward to giving them a go.

@ddk4664 4 жыл бұрын

Cant stop watching these vids you make sense !

@fiouable 3 жыл бұрын

Thank you. Very informative. And entertaining. Stay safe.

@ddeyong 2 жыл бұрын

love your videos John, greta great advice :)

@rickreese4188 5 жыл бұрын

Thank you for another fine learning experience.

@billcairns7613 4 жыл бұрын

HI John, have admired your vids and tech info for some time, excellent presentation especially for novices. For some reason this year in our part of Aberdeen, we've had some plant debris that came from tree buds I think. Having not cleaned them off the car quickly enough, they have left a sticky residue from the bud, which having washed and now used a clay bar on, are proving difficult to shift by hand. There are without exception up to around 100 - 200 of these marks particularly on the bonnet and roof. I have a white car, and the marks being a brown, orange colour, it stands out like a sore thumb. I'm thinking to invest in a DA polisher and wonder if you could recommend a suitable combo of pad and polish. I should have mentioned that the sticky residue, has now over time become hard and solid.

@sukhsahota9855 5 жыл бұрын

great timing of this video.... new to all this and this defo helps. Thanks for the email info!!

@prf76 3 жыл бұрын

Great video Jon, I may give the Scholl Concepts Polish a try. I was impressed with Meguiar’s ultimate compound and ultimate polish but want to expand my product range. Menzerna polishes are good, apart from the fact they dust up badly. Don’t know if it’s me that’s over worked them, got them too hot or what.

@johndoyle7726 5 жыл бұрын

Question for anyone with classic car experience, my friend owns an MG y from 1950 and wants to know what is a good polish to use its painted with stove enamel

@1BenjaP 4 жыл бұрын

Great all round insight Jon, wish I'd found you sooner. I've been using a lot of Poorboys compounding and polishing products and am pretty happy with them, but as I dont have much experience I wanted to know what you thought of them in general?.. should I put them to the back of the shelf and get in some Scholl instead?

@simonkennedy4881 3 жыл бұрын

Great tutorial this stumbled on your chanel when i was looking for a DA and im totally hooked to the reviews ( the wife thinks ive left her :-) ). Ive just got my Das 6 Pro+ and i was wondering which small plate you'd recommend please?

@JDM_MSK 3 жыл бұрын

this a fantastic tutorial, thanks !

@jasonmjonesuk 5 жыл бұрын

Nice updated video John 👍 I was originally going to go with S20 black as my one step solution from your original video, but after seeing your “clash of the titans” video I’ve gone for the Sonax PF - looking forward to trying it with my DAS6P and HexLogic greens 😎

@ForensicDetailing 5 жыл бұрын

let me know how you get on with it Jason, use less product than you normally would and really clean the pad out well. its good stuff Im just not sure if I will buy more PF due to the cost but I do like it.

@owensteele1274 4 жыл бұрын

@@ForensicDetailing I'd just buy the smaller bottles and re-order when they're done.

@ashbyts3900 3 жыл бұрын

A big thankyou Jon!! My DA12 works a treat and the Koch Chem is just simply amazing!! Spent my NYE day on my motorbike and it looks a treat!! Happy New Year Jon and keep the videos coming

@ForensicDetailing 3 жыл бұрын

Great to hear Ash happy new year to you and the family mate all the best.

@ashbyts3900 3 жыл бұрын

Jon a quick one - completed a 2 stage polish and wax. How often do you treat the paint again?? Like polishing or waxing?? ?? Now the paints corrected and waxed is there a product you would use after a wash until it’s due a wax again?? Also how often would you wax??

@chriswilson4381 4 жыл бұрын

Absolute legend. Love the videos

@Starmixologist 5 жыл бұрын

Dont forget to include Menzerna Power Lock in your sealent review :D Love when you do longer videos, keep up the good work!

@ForensicDetailing 5 жыл бұрын

on the list starm :)

@faisalmahmooduk 3 жыл бұрын

Great video, thanks !!

@shanomak39 4 жыл бұрын

best video ive seen. nice work.

@PaulDoldenDetails 5 жыл бұрын

Still got moonlight on my shelf Rob haven’t tried it yet now looking at getting a force drive polisher vertool hope your well my friend

@S40TBS 4 жыл бұрын

Great information 👍

@waheex 2 жыл бұрын

brilliant video. I'm a noob who usually just plasters wax on a car. So I think I have got a sort of order. 1.Wash and detail small areas 2. Claybar 3. S20 Medium cut with yellow pad on rotary polisher 4. Super finish plus with light white pad on rotary polisher and inspect 5. panel wipe 6. good quality wax (or sealer etc )

@rickh1634 4 жыл бұрын

Hi, great video mate. Is this for flattening orange peel (terrible on my Audi) or more for light swirls? Cheers (doesn’t have to be done in a day)

@col72 5 жыл бұрын

Cheers I think I'll just go for the s20 black as I have never machine polished before .

@Kennyde 2 жыл бұрын

Cheers mate, great video.

@ryanspalding9150 4 жыл бұрын

Great video, been struggling to find the blue Das 6 pro in stock anywhere, Slims detailing have a similar looking red and black one that is called Kestrel (Das6pro) is this essentially the same machine polisher?

@Love500 4 жыл бұрын

Very useful and informative, thank you

@DhesiWorld 2 жыл бұрын

Watched plenty of your videos, now finally braving myself to do some machine cut and polishing. Only very light swirls on my car, any recommendations for an all In one product? And which pad? Again, it's only very light swirls.

@Retset 5 жыл бұрын

Fantastic video. I have done some correction with my DAS 6 Pro but it turns out there was stuff I didn't know. For a start, I can buy a 3.5" backing plate and 4" pads - fantastic! I had been toying with the idea of a 3" DA but could never justify it. As for detail brushing trim edges during the wash process ... well, I haven't been but will now! This is a must watch video for anybody new (or not so new) to machine polishing.

@neilnash5214 4 жыл бұрын

Hi John, I’m going to attempt my first da polish, my car is a 15 plate Peugeot 308 sw gt line, paint is in pretty good condition apart from swirl marks and a few light scratches. What compound would you recommend me to use for a first timer? I have got some meguiars ultimate compound would that do? If not would you kindly recommend what I need as you seem to know your stuff. 👍🏻

@iSleepDoc 2 жыл бұрын

Very nice tutorial!!! Thanks!!!

@DaiPad881 3 жыл бұрын

Hi John, Firstly your channel is awesome, I have a BMW 1 series which i bought back in february and it has seen more than a few £5 car washes, It is very swirled up but has no deep scratches, I have never machined BMW paint, I am used to soft Mazda paint, I have a Rupes Duetto and i have some Scholl S20 with their purple spider pads as well as some lake country orange cutting discs, With the polish/pads mentioned have i any hope of removing the swirls or could you suggest something better? Best Regards Stew

@Timmo821 4 жыл бұрын

Question on panel wipe, can IPA be used exclusively as a panel wipe or do you need to use a mineral spirit based product after the correction stage? or is it dependent on how well it removes polish residue?

@GH3_Posh 5 жыл бұрын

Jon. As a newbie to the detailing scene, I just wanted to say thank you for your videos. They're really helping me out without the sales bull.... I struggled with your videos to start with as they were so factual and "basic" so tended to veer off toward the likes of Ammo, Pan, etc. That lasted a month. Now it's Forensic Detailing and a few other UK tubes that I watch and that's it. Thank you dude, keep up the great work.

@ForensicDetailing 5 жыл бұрын

I think I understand what your getting at.. its nice to get comments like this thanks Jon.

@GH3_Posh 5 жыл бұрын

@@ForensicDetailing Yeah, I meant no disrespect. The simplicity of the videos, combined with the actual factual information is what I now love. No frills. And as you're not trying to sell a product of your own you are impartial. I love that. Again, thanks dude. Just off to watch your latest video. 👌🏻👌🏻

@SuggyRacing 5 жыл бұрын

Hi. Will this technique/demo work on motorbikes too? I tend to find on the tank when your knees grip the bike, it tends to leave rub marks. Would you use a compound first then polish with the machine? Followed by a good wax? Do you have any videos for bikes at all?

@claytonautomotive9294 5 жыл бұрын

My wife has a 2016 750Li in mineral white. I want to buy a machine to keep it looking good. It’s hard to tell if it has scratches or swirls but I’m sure it does. I was looking at the Torq 15DA. Looking for advice on machine, pads and products. All in one/Polish/Sealant/Wax. Great channel I learn a lot. Thanks!

@julianbarrow455 2 жыл бұрын

Enjoy your videos, thank you. Subscribed

@ForensicDetailing 2 жыл бұрын

Welcome Julian thx you

@polystyrene7921 2 жыл бұрын

Thanks John 👍🏻

@rjmlondon 2 жыл бұрын

Have meguiars compound, prime pad, spread around on panel but after 2 passes the compound is drying in places so its hard to buff off.

@tonylyons9727 5 жыл бұрын

Hi ya John,if i wanted to give my car a good going over with a wash clay cut polish ect,could I do maybe a couple of panels an evening? Maybe both wings 1 night,bonet the next night and so on?

@ImGalilo 4 жыл бұрын

So happy I found your channel, so informative ! I'm taking delivery of my JDM STi 9 which is in a good condition but will need a good polish so i'm learning the theory on KZfaq. Thanks for the advices John!

@Wayne.R 5 жыл бұрын

Good video Jon. Nothing mentioned about micron levels, and paint depth gauges, i noticed, or the issues of polishing in bright sunshine, as opposed to under cover, where you can control things better. Other than that, I thought it was a good starters guide. Nice one mate.

@ForensicDetailing 5 жыл бұрын

true dat Wayne. I was gonna put something in on PDG's but i just thought it was a bridge too far for someone starting out and theres a lot of info for someone to absord here. done a video on it though. ideally all cars would have pretty good surveys done on them before machine polishing.. but reality how many full surveys are being done where say at least 50-100 readings are taken... but yer fair point well made mate.

@samsalmon9800 3 жыл бұрын

Great guy, & very helpful 👍

@AbdulMalik-xy7rd Жыл бұрын

Hi John, thank you for your excellent channel which I have subscribed to. I have decided to give my car a machine polish and am seeking advice. I am comfortable with washing and claying/decontaminating the paint. I am a little confused as to which polisher I should purchase and compound to use. Apologies if this is obvious already. Much appreciated

@ForensicDetailing Жыл бұрын

by the DA8 from in2detailing. Buy Scholl S20 black single stage polish. Use Flex Orange Pads for softer paint, and Flex Purple for harder paints. See description for all the products right down the bottem mate (affiliate links are used)

@stefanimuhlberger82 4 жыл бұрын

Great video!

@adissa8934 9 ай бұрын

Awesome video 👏👏👏👏👏👏👍

@conwah3697 4 жыл бұрын

Nice videos keep up the good work. I was wondering if there is anybody out there that could help me please. Ive got an old Clio Sport 182 in the black gold paint and its looking a bit shite so I decided to buy some gear and have a go at doing it myself. I had a go today with hex pads and Maguires ultimate compound. I tried various pads and a few passes and it looks to of hardly touched it at all no better at all really. What could I be doing wrong? it is still absolutely full of swirls marks even after two passes and two passes with polish, I have been using a DA could it be the compound just isnt coarse enough. Any help greatly appreciated, cheers

@snorris9118 5 жыл бұрын

Excellent guides, thank you! A simple question if I may, is there anything I should use to protect the finish having used a product like S20 Black to polish heavily oxidised paintwork?

@DB71170 4 жыл бұрын

You've refined the paintwork with S20 Black so now it's time to protect your hard work. Wax/Sealeants/ceramic etc

@MrMkariniot 5 жыл бұрын

So you said I do straight lines and after vertical and this one is one step . I have to do that 4 to 6 steps at a part . I would like to ask , I do 4..6 steps , every time I finish each steps do I have to change the powder ? Or keep going with the same compound or I change .? And after every part is finished I clean my pad right .? Sorry but try to understand cause I don’t speak so good English