Do we even know if it’s a true Fiber laser or just a glorified 20W IR? XTool refuses to answer that question.
@JoeyMcNew-Drummer14 сағат бұрын
These people wecreat keep announcing new products for sale, once we buy them they don't ship them. It feels like another Kickstarter campaign when you buy something from wecreat
@antoniopuerto8563Күн бұрын
Just adquired a rotary tool, have no idea what to do with it, but I was confident and your video helped so much. Too many crafts to discover.
@bigmacboneyКүн бұрын
Thanks Jared Goff big brother!!! Very helpful vid
@janisb13392 күн бұрын
I have a lot of different sharpening systems, most of them are from Worksharp, including Precision Adjust. But this one is one of the most versatile, it gives the easiest and fastest sharpening result for me. Love it! 👍
@sagegamer8502 күн бұрын
Welp. I failed on the #1 😅😂
@LenCanter2 күн бұрын
Thank you for the video ! Just spent 2 days cleaning/polishing my guitar, using Brasso, Gibson Guitar. Cleaner/ Polish, Lemon Oil, a polishing cloth, and a whole lot of elbow grease. Figured that there’s got to be an easier & quicker way to do it. The result for my guitar was excellent: However, I still have 21 guitars to do. Thanks Again, Len, Arecibo, Puerto Rico. 😁🌴🌴🎸🇵🇷
@relevation03 күн бұрын
Should I just buy the Roly? 😂
@voodoo2u4u3 күн бұрын
What if you needed something bigger
@LivinginTHog3 күн бұрын
It’s pretty clear all of the reviewers that received the ultra to review were bound not to physically provide a review until a set date. All the reviewers state the same similar thing. ‘I’ll test this in the coming weeks “ or “in my next video I can’t wait to get using this”. What maker, laser nut, general interest influencer would not immediately not stay up all night and produce even a rudimentary initial use video. They are all under some restriction. Ok. I’m not bashing any of the reviewers. Really. I’m not. I just think it should be clear that there is a reason xtools put this restriction in place. Either they fear a let down on the hype or this is simply the hype mechanism or something else. It should just be obvious that there is a play here.
@kevinrich46373 күн бұрын
I agree and I sent questions to XTool and said this type of campaign really isn’t the best. I was ready to pull the trigger but I’m not spending that kind of money without seeing it actually function. I even asked XTool when the information will be released the only answer I get is “you will have to wait for for the live event”. When is the the live event? “Not long”. What I wish they will do is allow these creators to show the unit functionality and then have a restriction of when it will be released (ie it will be announced at the live event on X date) this type of campaign pisses me off more than makes me want it.
@Benjamin-vx2ot3 күн бұрын
@@kevinrich4637for me its exactly the same! this makes me question even more if that is just a hype and that product may be not as good as they say 🤷♂️🤷♂️
@kevinb.74914 күн бұрын
You always do a great job on your videos bro. Keep up the great job :)
@CorneliusCreations4 күн бұрын
Thank you for the kind words, Kevin!
@kevinb.74914 күн бұрын
@@CorneliusCreations you bet Cornelius
@ShyneflowLC4 күн бұрын
Regarding the fiber power... i for sure think it was a missed opportunity going with 20w... especially because the 30...50...and 60w+ machines can be operated at a lower power if need be. Had this been a 50w machine... it would be a hands down no brianer. Great video as always brother!
@CorneliusCreations4 күн бұрын
I appreciate your valuable input my friend! I wonder how much more the machine be if it were let say being a 50W?
@ShyneflowLC4 күн бұрын
@CorneliusCreations I would hope it workshop be astronomically more. To be finest is expect that to be more what their "original price" on this laser is... maybe slightly higher. That's just me
@Staren014 күн бұрын
The reason I decided to put the deposit down was all of the convenance features. Yes there are more powerful fiber lasers, but the comparison to Apple is spot on. You're paying for the fit and finish, and the nice to have features that are going to make the user experience smoother. Sometimes you want Android because you can tinker and see what you can do. Sometimes you want Apple because it will just work. It may not work exactly the way you want it to, but it's going to work. Do you want to tinker, or do you want to make stuff? If you want to tinker, that's fine. I've built all of my own computers for a decade because I enjoy the process and picking out exactly what I want, but you have to know what your goals are going in. I'm a leatherworker. I like what I'm seeing in the F1 Ultra because it has a big enough work area to cut leather parts for pocket items like wallets, notebook covers, belt pouches, but it can also engrave hardware like the heads of snaps, chunkier zipper pulls, and D-rings.
@CorneliusCreations4 күн бұрын
Very well put! I appreciate your comment giving me your thought process on why you are buying. I know it is super hard without seeing reviews yet.
@CorneliusCreations4 күн бұрын
Mike Smerka's Photo Engraving Course I Recommend: www.diodedesignsllc.com/product/PhotoEngraving4232024/43?cp=true&sa=false&sbp=false&q=false&category_id=B56ZPZIQIDPBUJTA2LATZUW5
@CorneliusCreations4 күн бұрын
Mike Smerka's P2 Rotary Course I recommend: www.diodedesignsllc.com/product/p2-tumbler-education-pre-recorded/54?cs=true&cst=popular
@DanH37ww4 күн бұрын
Your excitement shows for sure!
@CorneliusCreations4 күн бұрын
You have no idea haha
@DanH37ww4 күн бұрын
@@CorneliusCreations I'm a little excited too. Those challenge coins look sweet!
@CorneliusCreations4 күн бұрын
Yes they do!
@mikec81014 күн бұрын
Do you know if/how the XCS ‘curve process’ mode ‘curve-measure’ works with the F1 Ultra?
@CorneliusCreations4 күн бұрын
Not yet, but I will have it in my review… I am SO excited for it!
@arthurtotherow82084 күн бұрын
I know you are not allowed to show anything yet from your testing but when can we expect to see some of it?
@CorneliusCreations4 күн бұрын
Towards the end of the month :)
@Staren013 күн бұрын
Translation, either right after the deposit period ends or maybe a day before for a last push for deposits. I'm not bashing XTool or anyone who is part of the review program, those are just the logical options.
@the1knifepro1694 күн бұрын
Can it engrave steel on knives or firearms to .005 - .008 ? Thank you for making this and all of your other videos!
@CorneliusCreations4 күн бұрын
I can’t accurately say yet on firearm steel, but I’m sure it will be very good. I will let you know in my review! Thank you for the kind words!
@the1knifepro1694 күн бұрын
@@CorneliusCreations Thank you for the response and I'll look forward to your review.
@CorneliusCreations4 күн бұрын
Save $1,000 NOW Before May 28, 2024 👇 - Preorder US: bit.ly/F1UltraUSA - Preorder EU: bit.ly/F1UltraEU - Preorder UK: bit.ly/UltraF1UK
@MatthewRyan19964 күн бұрын
What is crazy to me is no one is allowed to show it in actual, but they have a deal if you pre order it you get a 1000 off but you really don’t even know what you’re buying since we can’t see what it can do.
@CorneliusCreations4 күн бұрын
The reviews should be here soon. I just now got my software to start using it :)
@lasermasterclass4 күн бұрын
Hustle
@CorneliusCreations4 күн бұрын
For sure!
@user-ve8ne6uy2w4 күн бұрын
I have had my X Tool D1 20W almost two years and I know its a great unit. But the enclosure and camera are big Deals as they were not standard when the D-1 came out. Thanks for a great review.
@CorneliusCreations4 күн бұрын
I appreciate you taking time to write this! Glad you enjoyed it!
@atleather4 күн бұрын
Thanks for the video. When will you have the review videos coming out? I need more info before I pull the trigger on $3800.
@CorneliusCreations4 күн бұрын
I understand. Hopefully by the end of the month!
@user-wo6nb5vo5q4 күн бұрын
Very nice work
@CorneliusCreations4 күн бұрын
Thank you! Cheers!
@tonihuff70825 күн бұрын
I would love this to help make money for the VFW that I'm a member of.
@TheSimplyNaderShow5 күн бұрын
Super cool
@CorneliusCreations5 күн бұрын
Thank you bro! Hope you have been well dude!
@pierrete84495 күн бұрын
Super nice videos, you help me a lot ! I would like your advice for wired one : I've only had the dremel 4250 for two months and it's already broken. I've tried to repair it but it's not possible. i'm asking myself to buy new one (or different model and which one ?) but after this 1st experience i'm not confident. I work mainly with solid wood, only on small pieces like dry flowers vases, plates, spoon and contemporary sculpture.
@pierrete84495 күн бұрын
Hi! I've only had the dremel 4250 for two months and it's already broken. I've tried to repair it but it's not possible. i'm asking myself to buy new one (or different model and which one ?) but after this 1st experience i'm not confident. What do you think/any advice for wired one ? 🙏🙏 I work mainly with solid wood, only on small pieces like dry flowers vases, plates, spoon and contemporary sculpture.
@0LUV1A6 күн бұрын
Why my Cricut won’t connect
@kevinrich46376 күн бұрын
Click bait! Idk who came up with this marketing idea this is about sending out these ‘units’ but NO ONE shows it being used. I am about to say screw it what are they hiding and what’s wrong with them. Xtool if you’re reading this either put up or shut up. This marketing is beginning to piss me off.
@CorneliusCreations5 күн бұрын
Hey Kevin, Let me explain my friend, It isn't clickbait. Let me help you understand. (Many many companies do this) This is a "First look". None of the people who received their machine at the time of the video has even RECEIVED the software to run it at the time of the videos... So we CANT show you. (Or at least I didn't receive the software loaded on). No one is allowed to show the machine running until xTool does the official release. There are many reasons for this, but the business model for these tools is influencer marketing and such. Many companies will promote a product and wait for the release of it. I am sorry if it sounds click bait, but first looks are information videos, not tutorials or demo videos. However, The review should be out soon! I hope this clears things up for you man.
@kevinrich46375 күн бұрын
@@CorneliusCreations thank you for your response. I apologize if seemed like I was directing my frustration at you as that was not my intention. I understand what you’re saying but not the best marketing model. I wrote Xtools with questions and I get hang tight it will be answered at the live unveiling, but they won’t tell me when that is. Seems to me if you’re going to toss the carrot out you need to put it close enough for a bite or it will be ignored. BUT that means. I’m not spending that amount of money without seeing it working live and getting some different opinions. In the end I’ll high five ya go down with you for a Diet Coke. Have a good day.
@CorneliusCreations5 күн бұрын
No problem, Kevin! I understand how it can be sometimes bro! When new products are released the suspense can be overwhelming, especially when you spend a lot of money! I looked forward to seeing you around here man! If you don't mind, I will skip the diet coke and take you up on some coffee haha! Cheers, Kevin!
@Benjamin-vx2ot6 күн бұрын
thx!! do u konw if there comes accesories with it? prob. we have to buy it separate 😅
@irelandtheemeraldisle45486 күн бұрын
Wats the wood used for relief carving commonly,sir?!!
@MaryDeanDotCom6 күн бұрын
Cool! I'm going to shine up the metal parts of my wine-barrel table.
@bryanhembree836 күн бұрын
Did he change knives?
@houstonfirefox6 күн бұрын
I put my deposit down but am still not sure if it comes with the accessories such as the conveyor
@ronaldlittle24085 күн бұрын
I called them today it does not come with coveyer
@houstonfirefox5 күн бұрын
@@ronaldlittle2408 Thanks. I wonder if early adopters get ANY accessories
@UTINNIDESIGNS6 күн бұрын
Can’t wait to see this in action.. I wonder if it can cut clear acrylic for bases and trophies as well as engrave them..
@beamituplaserworks6 күн бұрын
Unfortunately, 1064 (fiber) and 455 (blue diode) aren't good for absorbing into clear acrylic. For that you really need the 10,600 wavelength which is the CO2 laser.
@CorneliusCreations5 күн бұрын
You will need a C02 for cutting clear acrylic. Diodes or Fibers can't.
@BORICUACHANNEL6 күн бұрын
a lot of videos of the F1 Ultra but no one's is showing video's using it 😂
@CorneliusCreations6 күн бұрын
😁 It is first look, we are not allowed to show anything yet.
@beamituplaserworks6 күн бұрын
@@CorneliusCreations thanks for your transparency about that! Most of the videos I've seen on the Ultra haven't been as open about why they haven't shown the machine at work and it's been confusing to a lot of viewers as to why, based on the comments sections.
@CorneliusCreations5 күн бұрын
Yes sir, I completely understand my friend. I didn't even receive software at the time of this video that even supported the ultra. These are first look videos which does not include a demo or testing. We cannot share info until xTool has the official release.
@ShyneflowLC6 күн бұрын
😮😮😮
@CorneliusCreations5 күн бұрын
👊👍
@Graziano-qg7rh7 күн бұрын
Grande spiegazione il coltello mi arriva da Amazon tra 5 giorni modifico il saldatore per le incisioni nel legno poi tratto il legno e aggiungo una vernice per barche speciale per la lama tutto chiaro grande spiegazione 👍👋🇮🇹
@kirtandrews18597 күн бұрын
I use a work 12v multi tool cost me about £40 and ir is fantastic for smaller items engraving spoons. Mugs chopping boards etc. And it has a much smaller handle so it feels more natural in the hand. And WORX build good quality products and 3yr warranty usually. I researched power on dremel and they were all lower than this worx rotary tool I bought myself
@CorneliusCreations7 күн бұрын
Thanks for sharing!
@TriadoMax7 күн бұрын
Great video Matt, looks like a really cool laser!
@CorneliusCreations7 күн бұрын
Thank you, Max!
@mikec81017 күн бұрын
Any word on lightburn compatibility?
@CorneliusCreations7 күн бұрын
I’m sure it will be… but haven’t heard anything yet. But with how intelligent XCS is getting, I would encourage people to use it, especially with the conveyor, batch process etc.
@mikec81017 күн бұрын
@@CorneliusCreations I wouldn’t mind switching to XCS, but ideally I would like a consistent workflow across all my lasers. It would be nice if XCS had paid addons/plugins to support other laser controllers like ezcad, ruida, and trocen controller boards.
@CorneliusCreations7 күн бұрын
I totally get where you are coming from. If you are invested into other lasers i could see where LB would be the way to go.
@beamituplaserworks6 күн бұрын
The down side is that even if it is LB compatible (which I'm sure it will be as it is basically THE Laser Controller Software), all of the cool stuff that most people are buying this laser for will probably only be available for use in XCS. XTool is always pushing the boundaries and really leading the way with their R&D so it's probably impossible for the LB devs to keep up with their innovations. LightBurn is a shockingly small company, especially considering their dominance as essentially the standard of laser controller software.
@CorneliusCreations5 күн бұрын
Very well put sir! I have a video coming out today that will help address this and help people make a decision.
@pacsconsultant12717 күн бұрын
Great intro - Thx. I’m eager to see it actually work. I gave them a $100 deposit day 1 - even though I’m still learning to use my P2.
@CorneliusCreations7 күн бұрын
Thank you sir! The P2 is AMAZING! With this, the capability will be off the charts. I would use your P2 for LARGE projects and this to bulk smaller to medium size projects…
@mikec81017 күн бұрын
I’m surprised they’ve only gotten 260 deposits so far. I guess most are waiting to see it in action.
@relevation03 күн бұрын
@@mikec8101i find their website a pain in the ass
@CorneliusCreations7 күн бұрын
Save $1,000 NOW Before May 28, 2024 👇 - Preorder your F1 ULTRA here - US: bit.ly/F1UltraUSA - Preorder EU: bit.ly/F1UltraEU - Preorder UK: bit.ly/UltraF1UK
@locoxellas9 күн бұрын
i need a cheap business card laser engraver machine, any suggestions?
@CorneliusCreations7 күн бұрын
xtool m1?
@leniekrick48869 күн бұрын
All of them are my favorite! Thanks bubba!
@CorneliusCreations9 күн бұрын
Glad you enjoyed them!
@Jackie_Rosewood9 күн бұрын
Awesome tips! Just purchased a dremel and getting started. Can’t wait to see what I can create! Hope you have a wonderful weekend!!
@CorneliusCreations9 күн бұрын
Thank you! You too!
@fouroakscrafts72409 күн бұрын
Great tips! I have about 3 Dremels, but also like my Strong 202 micro motor. I like you tips on organizing your tools. It is stressful when they don't have a home.