Go from bare aluminum to a mirror finish with the Restorer, WD40, 120/240/600 grit polishing drums and aluminum polishing compound. See more at restorertools.com
Пікірлер: 31
@user-tv6mt7di3xАй бұрын
Thanks for the informative video.
@Demonoid199010 ай бұрын
I just got done hand sanding and polishing the big aluminum utility box on my semi. It was an old one the company put on, heavily oxidized and a lot of pitting. Cleaned to whole thing off with some brake cleaner. After that I sprayed it down in WD-40 and knocked off all the oxidized layer with a 240 grit scotchbrite ball, then hand sanded working my way all the way up to 2000 grit, using WD-40 and wiping it down between grit changes. Finished off with some Mothers Mag & Aluminum polish and now I can see my reflection. Still quite a bit pitted and dinged up in areas, but it certainly looks a lot better all shined up.
@KundelCrane10 ай бұрын
That is awesome!!
@Norbicsek842 жыл бұрын
Üdv ez nagyon szép lehet. Gratulálok Feliratkoztam. 🤝👍✌
@22josta4 ай бұрын
not bad at all! I have a Pontoon boat, and when we acid wash the toons, they lose their milled or grained look to em... Nobody has ever shown how to get that look back. Closest I've seen is the Shark Hide guy doing a Grained or hand rubbed finish with some different grade scotchbrite pads.. But i bet this would be so much better!! I believe I heard some where that the finish on pontoons from stock is 600 grit ???
@KundelCrane4 ай бұрын
We have a 400/600 grit scotchbrite drum 👍🏼
@johanneslebrecht309710 ай бұрын
It’s not going to get you the most perfect looking finish but it does the trick.
@itawad Жыл бұрын
Great Video, I am polishing a plane nose to use indoors for mancave. After polishing, do I need to seal it? if yes with what ?
@KundelCrane Жыл бұрын
Great question. There are clear coating products on the market that can help with this.
@deejaydjan1080 Жыл бұрын
How much rpm is the best to brush aluminum? Thanks!
@KundelCrane Жыл бұрын
This was 3,200 rpm
@dennisfly13 жыл бұрын
Nice tool for flat surface
@KundelCrane3 жыл бұрын
Also have sandpaper profile flap wheels for any curved or contoured Surface
@adam42842 жыл бұрын
Hi, could you tell me the name of this bundle please. I'm not sure which 1 it is on your site 👍🏻
@KundelCrane2 жыл бұрын
Aluminum/Stainless Refinishing kit
@notaloneintokyo2 жыл бұрын
Rip headphone users
@KundelCrane2 жыл бұрын
sorry brother
@tirathnagda83392 жыл бұрын
What is this machine used? Name & model?
@KundelCrane2 жыл бұрын
www.restorertools.com
@invetech16 ай бұрын
Maybe don't put mic right next to Restorer?
@KundelCrane6 ай бұрын
😆
@amichael40522 жыл бұрын
you should do a sound check before you post videos man.
@KundelCrane2 жыл бұрын
Thanks. Just recording quick stories for IG with my phone and ended up uploading this one.
@MAGAMAN2 жыл бұрын
All you really need it wD-40 and steel wool. That machine is useless on anything that isn't flat.
@KundelCrane2 жыл бұрын
Actually it works really well on irregular surfaces with our nylon brushes, sandpaper and scotchbrite flap wheels. Thanks for the feedback!
@ronmcintyre9290 Жыл бұрын
Use a DA and sand paper
@KundelCrane Жыл бұрын
thanks for the feedback. The Restorer is a linear polisher so you won't have to worry about swirl marks on the surface :-)
@Marksmith-it2xy2 жыл бұрын
Damn dude speak into the freaking microphone so people can hear you
@KundelCrane2 жыл бұрын
Great point
@MAGAMAN2 жыл бұрын
Every video I have watched on restoring aluminum has been like this.