How to Print with Bambu PETG-CF Filament on a Bambu Labs X1 Carbon 3D Printer

No video

How to Print with Bambu PETG-CF Filament on a Bambu Labs X1 Carbon 3D Printer

Рет қаралды 23,994

Күн бұрын

In this video, I'll guide you through the process of 3D printing with Bambu PETG-CF filament on a Bambu Labs X1 Carbon 3D Printer. Learn how to achieve strong, sleek, and shiny prints like drone frames and other functional parts using this advanced composite material. Discover the proper drying techniques and optimal slicing settings to make the most of your Bambu PETG-CF prints. Don't forget to like, comment, and subscribe for more 3D printing tutorials and tips! #BambuPETGCF #BambuLabsX1Carbon #3dprinting
/ lendizzleprintz
Link to drone frame stl:
www.printables...
DJI FPV Drone
amzn.to/43Anwc6
Support the channel and buy a shirt:
www.lendizzlepr...
Filament I recommend:
eSUN PLA+ Filament - amzn.to/41YCnMl
Paramount PLA - amzn.to/3JuyfLI
Maker Space Stuff:
Sewing/ Cutting Mat- amzn.to/3najNkv
Steel Rulers- amzn.to/3K89Ddn
Digital Caliper- amzn.to/40CyF9I
Nut Drivers- amzn.to/3LVb2oP
Hex driver- amzn.to/3zcuJkg
Tekton Screwdriver set- amzn.to/3FNfhiv
Sharpie - amzn.to/3ZUg4Fv
Video Equipment:
Canon EOS R7 - amzn.to/40iHuFQ
Canon M50 - amzn.to/3ZUJKmx
Canon EOS R7 RF-S18-150mm F3.5-6.3 - amzn.to/3T3BKx3
Canon RF50mm F1.8 STM - amzn.to/3T0Shlj
Canon EF-S 24mm - amzn.to/3FwTtHR
SmallRig Cage Canon EOS R7 - amzn.to/3JNLAQA
SmallRig Cage Canon M50 - amzn.to/3LxfXMH
Label Maker:
Brother P-Touch Cube Smartphone Label Maker - amzn.to/3l3Q5gD
Refill - amzn.to/3JLUdvc
Lights:
Octagon Softbox - amzn.to/3YQB7Iw
As an Amazon Associate, I earn from qualifying purchases.

Пікірлер: 51

@cluberic 11 ай бұрын

didnt learn anything from this, what temps did you use?

@illmatik0ne241 Жыл бұрын

Thank you for the video. My first ever 3D printer may be this printer so I know so little in the field. This video was very helpful and made me feel like I could start printing more advanced materials like this.

@lendizzle77 Жыл бұрын

Glad it was helpful! The Bambu X1C would make a great 1st printer! I had a creality and hated it; almost gave up on 3D printing.

@adriandolha9582 7 ай бұрын

hello sir ! what settings do you use for carbon fiber? bed and nozzel?

@randystevens2710 Жыл бұрын

Great Video, Thank You

@lendizzle77 Жыл бұрын

Thanks for watching!

@heroflying Жыл бұрын

Just fair warning: if you're building a quad for flight performance with like a Betaflight/Kiss/Emuflight type flight controller, no carbon fiber infused filament is going to replace carbon fiber plates for the frame. It's just not gonna happen. Another thing to be aware of with CF infused filaments - they're not all created equal. I dunno about Bambu's, but there's a big difference between having ground up CF powder and actual CF strands. 3dxtech has actual CF strands in it, and it is MUCH stiffer than others I've tried.

@lendizzle77 Жыл бұрын

I have a tiny drone with a broken frame. Hopes are not high and I am not using it to qualify for DRL. lol Others can learn from me either way.

@kazikoFPV Жыл бұрын

I worked for NikkoRC and designed the DRL toy racing drone with Betaflight. Frame vibrations can ALWAYS be tuned out. You can make a drone out of Popsicle sticks if you wanted to.

@heroflying Жыл бұрын

@@kazikoFPV Yeah, you can apply tons of filtering and what not to make it flyable. That doesn't mean it will fly remotely as well as a quad with drastically less resonance. The flight characteristics of a carbon fiber frame vs a carbon fiber infused filament printed frame won't be remotely the same was all I was saying, and just making sure there was a reasonable expectation of that.

@alexfeatherstone6676 Жыл бұрын

@@kazikoFPVyes but that is done with additional filtering, too much and the latency results in bad propwash and horrendous pid Latency.

@dtdionne Жыл бұрын

Dude, great video!

@lendizzle77 Жыл бұрын

Glad you liked it!

@ColoradoAdventureClub Жыл бұрын

So thats how the dry filament works! I saw the option never looked any further.

@lendizzle77 Жыл бұрын

kinda easy right?

@bigj-yn3tf 4 ай бұрын

My rfid does not read PLA CF at all. I tried different spots in AMS. The only thing I have different than you is a 0.4 nozzle, would that be the reason it does not read CF?

@MarkRouleau Жыл бұрын

Was that a printed spool in your AMS? If so, can you link it? I have tried a few so far and not happy with them.

@lendizzle77 Жыл бұрын

It came with the filament. All of the CF filaments come with the high temp spool. I haven’t seen a refill option for them yet. I printed one from the preloaded files on the printer and it worked fine for a refill of the PLA Basic. Have you tried that one?

@MarkRouleau Жыл бұрын

@@lendizzle77 Ah ok. Yeah that grey one with the blue filament just looked printed and different from any that i printed. The one i found from Bambu was solid. i didn't like that. So I have been printing others that I find.

@lendizzle77 Жыл бұрын

let me know if you find a good one.

@cbking95 Жыл бұрын

@@MarkRouleau there's one with hexagon holes remixed on printables. I have had good luck with it.

@dannyboy8231995 Жыл бұрын

Bambu Labs says you shouldnt use carbon fiber in the AMS. learned this that hard way the day after I printed with CF the first time, the released that statement.

@stephenlougee5266 Жыл бұрын

They sell CF filament…..are you sure they didn’t say TPU or not you use Cardboard spools. I’ve heard info about those. I printed PLA-CF today with no issues.

@christopherarendt3531 10 ай бұрын

pla-cf comes with the x1c..

@ARouser15 Жыл бұрын

printing petg cf on my p1p right now, and its coming out pretty rough. I tried some nylon cf pa12 about a week ago, and it was amazing. I'm not sure I like petg cf now... nylon is superior....

@dsemolian3071 Жыл бұрын

🤘BITCHIN🤘 Didn't know you're a pilot, I fly as well... but not well🤦‍♂️I tried printing frames back when the "toothpick" quads started, using nylon on my pimped out old school original ender3, with poor results. Used petg also, then just bought one🤷‍♂️ My BLX1CC will do the job, maybe I'll get back onto flying again! I have some wicked birds on the shelf. I think i have some vids on my channel showing some of my toys.

@lendizzle77 Жыл бұрын

I have an old iFlight A85 with a busted frame. Figure I'll just print a frame of each material and see which one is the best; if it works at all. lol My hopes are not high.

@heroflying Жыл бұрын

Us FPV pilots gotta stick together, amirite? *high five*

@exiledwithfabianvacca3890 9 ай бұрын

I don't seem to have ANY luck with PETG-CF. I get constant buildup filament on the nozzle which ruins lengthy prints. I have dried it and tried hours of settings from reddit and youtube to no avail

@lendizzle77 9 ай бұрын

.6mm nozzle?

@cameronheinricks8571 5 ай бұрын

I have the same issue, 0.4mm nozzle, tried reducing flow to 93% as support suggested, tried lowering print temp by 5f as suggested, dried to RH 5%, i will admit it lowered the size of the blob but it still builds and any print over a few hours is problematic. I asked another P1P user and they said go way lower like 230f instead of 255 profile or 250 according to the wiki, he also suggested making sure the side fan is off, and the door is open for more ventilation, going to try this next. I will say I am disappointment in support and bambu for not having a closer tuned profile, having to spend $ on filament to basically remake a profile from scratch is terrible cost wise and time wise not to mention the user experience thats supposed to be so fine tuned.... I found Crealitys profiles to be much closer and easier to figure out for everything from pla and petg to ASA and ABS, on my k1 max, and ender 3 sonic pad.

@chromamaster6147 Жыл бұрын

My experience printing with PETG-CF, a number of years ago, was that it was very stiff. Could your stiffness be related to fast printing speeds?

@lendizzle77 Жыл бұрын

I'm not sure how those are related.

@skyrider4789 Жыл бұрын

I think you're saying this because faster speeds sometimes = weaker bond of layers, maybe causing more flex?

@dowowens6214 Жыл бұрын

How many times do you have to dry the filament?

@lendizzle77 Жыл бұрын

Once before you print but if the filament has been left out for a period of time, you will need to dry it again

@bigj-yn3tf 4 ай бұрын

What if you live in AZ and its bone dry? I havent done it yet

@RumourHasitYT Жыл бұрын

Bambu advise not to use the AMS for CF material. You should only use the single spool holder on the back

@lendizzle77 Жыл бұрын

Please see product pages. Not all CF filaments have that recommendation.

@juventinoaparis 14 күн бұрын

8 hours!?!!

@rexxx927 Жыл бұрын

IMO PETGCF is not choice for drones its better to use PA6-PA12 CF these guys making EZPC are not 100% pc but a blend of PC same for PETG modifiers and other additives are also used to aide the process in FDM thus why your "old petg" is stiffer but is way more fragile under splits and fractures over others just like pc a real roll of PC CF like lexan by sabic is 250$/kg but is 3x over the wanna be PC or EZPC in most areas. the only thing CF or GF does is increase the Z layer adhesion and improve the weight and stiffness while decreasing the x and y strength with composites