Great demonstration . Highly professional . 👏👏

Thats the best demonstration of how to spray doors ive seen.

Thanks for sharing. Nice clean and well-organised set up. Perfect technique and results.

Excellent instructions and advice. Really helpful and you touched on all the questions I had and more. Thanks.

you did a perfect job painting my room.god bless you

Loved this...Doors looking good. Great set up. Thank you for this

I replaced all of my interior doors. I used a paint sprayer to paint them. After the prepping and masking the areas off, I was able to get the doors done quickly. I was pleasantly surprised at the results. I couldn’t have done it without your helpful instructions!!

Thank you so much for the tips. I am not a pro but I am going to tackle some big home projects.You make it look so easy breezy which comes from much practice and having a great system.

Thank you for the tips. I feel more confident now to spray my cabinets.

Beautiful results with the spray painting technique.

So satisfying to watch.

Awesome love your assembly line approach it's massive time saver

Thanks for the video, the best airless sprayer instructions I have watched for doors. Very real time savings

excellent work thank you from California

Great Job with the Video! God Bless and Keep You!

Great job here. I spray trim as well and I always love peoples videos who do it right. Thanks for video.

thank you for sharing your knowledge helps me avoid some mistakes

Nice video. Thanks for posting.

Man with good heart god bless your business

Wow! You made it look easy!!!

Beautiful job! Thank you. I needed this to get started on my doors.

This is the beswt video I have seen on painting; right mix of tip, tricks, and demonstration!

God bless your company thanks a lot

That's a great finish and you make it look so easy.

Wow looks awesome

Thanks for a great video ! Simple and smooth!

Excellent job

Omg I needed this so awesome..thank you So much!!

Very useful. Thank you.

Very professional!!

Great video. Thank you for sharing your experience.

Thank you for sharing!! Saved me so much time

Best video I ever see thanks again

Good skills and good equipment, thanks for the video.

Wow! That was an impressive job. Informative!

Nice demo thanks for sharing.

Great instructional and tips...About to buy my first airless for a home we just purchased and needs all the interior trim/doors painted. Your video was very helpful thank you!

Great informative video.. Ill be doing my doors at the weekend and after watching this I'm sure they'll turn out looking smooth and even, If not expect a phone call sir.

Excellent job, thank you!

Great video thanks for sharing

Nice job, perfect finish like mirror! 👍

Thanks, I’ll be getting the corner brackets

My brother your definitely A professional 👏 From one painter to the other Great work my friend ✨✨✨

Thank you. Nicely done.

i love the door shapes it leaves on the wall too:)

Great job Sir!

man that how professionals do it!!!

Have a great Susan thank you for the schooling

You the best bro

Thanks Jody!!! You really helped me out with this video. Way better than than what I was planning to do

Good job man

Well done!

You make it look easy

Good job looks good

Great job

Thanks for sharing! Instead of aquiring new doors you can paint them. And fast with the paint spray machine. Ill do it with our kitchen cabin doors as well. Thanks again. And Lord's blessings.

I like it great job👍🏻

Why are so many people jerks in the comments?? Life's too short to be a dick. Thanks for the video, and no matter what the method or the machine, it worked and I bet the customer was happy. Thanks for the tips.

30 doors, 2 sides each = 60 sides. That’s 10 squats per door = 300 squats. Great workout! 😛BTW the doors look great 👍🏼

Good worker

Great video

nice work. thanks!!!!

Great video👌

Joseph, Great video, thank you so much for sharing your knowledge and expertise with all of us. I own and operate a small painting company in Calgary Canada 🇨🇦. I will like to share a trick with you once spraying doors. I do it exactly the same way with the only difference that I use a heavy card board in top of the doors to prevent overspray on the ceilings. Stay blessed amigo!

Nice job man great idea I’m starting my new painting small business here in Florida this will definitely help thanks for sharing God Bless you 🙏 I have subscribed

Nice video mate thanks for sharing, from nz cheers

Good video bro! Thanks

Good job, God bless

Nice to see you using enamel, not like most of the others using water based

good video , and thanks for getting the shot at an angle close up to see the finish , tons people don't do that , and ANYTHING looks good "head on from 6 feet away" in a video .... gotta get the close up , at the angle , seeing the light from the side .... That's how ya do it .... good vid ..... can't tell you how many videos I've seen where I KNOW those cabinets look like crap "up close at an angle" but the people say how wonderful they are and show a head on shot from a distance ..... I watched one gal just sloppin paint on with chip brushes and sponge brushes , then sayin how great it looks .... ya right .... lol

good job!

Thanks for such a great, informative video.

Good job buddy

Nice video. Hope business is doing well.

Really great video...I run a painting and decorating business in the UK and airless spraying is part of the setup, mainly used on new build work and commercial refurbs..a Graco 495 and we tend to follow the American style of doors & trim, then walls and lastly ceilings, all water-based products when spraying..although sometimes we will leave all the pre-primed doors until everything else is fully completed, then mask a whole room off (or two) and then airless spray 2 coats of water based satin or gloss to all the doors..very quick and a great finish....I have watched lots of airless spray painting videos on youtube, connected with the building industry obviously, and I have to say yours is easily the best!...Very well explained, concise and to the point and for the first time in ages, a guy that can actually spray properly (walk the walk), professional and the proper technique and execution...a great job done sir! and very good advice given and your technique was so good, it was a pleasure to watch...believe me, I have seen many videos on this subject on youtube, that have been painful to watch, performed by people who simply haven't got a clue..sometimes I just can't believe what I'm witnessing.....anyway, you did a really professional job and the doors had a great finish with the first coat...such a refreshing change to see someone do a proper spray job!...I just subscribed

It was ok you can spray good video

thank

Nice

Yeah, the doors were all perfect as they were, perfectly hard good wood, perfectly flat and smooth, no dents or damages, no need to pain stripping or repairs etc. Easy

Get a flexible whip hose at the pistol and you'll have more flex and less cramp in your hand . Great paint job!

Maybe try a .210 for the spines, less overspray, and a gun extension to save your knees and back. Thats just my preferred set up. .412 fflp is my go to tip for doors, .310 fflp for trim.

Yes! 4/11 tip... just right !

Thanks for the tip tip 😂 I tried using 515 & 315 and getting major runs and heavy holidays all over no matter how fast I moved. I’m going to try a 311 even though they say to use that for stain on the package. Wish me luck! Great work!

God bless you😇

You should try Graco's FFLP tips. With your approach you will achieve excellent results.

Professionally

I prefer my own personally made rotisserie and rack on-site setup so it's always the perfect angle for spraying. I don't like leaning them on the wall because sometimes it warps

Will somebody please see why that little dog is barking so much. Everytime he starts spraying that dog barks. 🤣

Look easy when a professional done it but obviously isn't easy good work btw 👍

Airless, but would use a whip hose to make it easier and prefer to use door stackersrather than stand the doors but good video and knows some spray technique.

Best to use the stack racks they avoid runs and the possibility of hitting the ceiling. Then you have to flip the doors so more hand contact. the Stack racks work well well.

Got Airless & HVLP Spray units .For finish I prefer HVLP unit for Undercoat will use Airless.Takes seconds do a door it's setting up takes time If possible hang doors Use couple eye loops ,books & length chain For best finish but need space lay doors flat ,spray edges (inc top & bottom forms seal protect from water)

Thanks for the video. Cool to randomly find someone on KZfaq that shops at JC licht. I go to the Wheaton one. God bless

Damn. I really do need a paint sprayer.

Wow, you've made that look so simple, but I'm sure it's an art! Not sure I'm brave enough to attempt this myself.

I like using a extension to spray with a 310 tip

Hello, thanks for the very clear and straightforward video. I have a Wagner P130 with a 515 tip which I have used to paint ceilings and walls. Would this setup work for interior doors? I am a DIYer.

Ci fosse in italiano ve ne saremmo grati saluti ai colleghi pittori 👋🏻👋🏻

Awesome nice coatings. Do you sand between coats always or is there a way to get a second coat timed to chemically bond to the first. You know like a lacquer.

Nice finish