How to Program a Baofeng HAM Radio with Chirp

How to Program a Baofeng HAM Radio with Chirp - TheSmokinApe

Рет қаралды 220,577

Күн бұрын

How to program a Baofeng HAM Radio for Repeaters Made Easy With Chirp - TheSmokinApe
Please consider supporting TheSmokinApe Channel on Patreon Here: / thesmokinape
Links to products in the video: www.amazon.com/shop/TheSmokinApe
As an Amazon Associate I earn from qualifying purchases.
Just a quick video showing how easy it is to program repeater information into a Baofeng HAM Hand Held Radio. In this video I used a UV-5RE Plus but it works the same for any of the UV-5R variants.
I used Chirp to program this radio which can be found here:
chirp.danplanet.com/projects/c...
I used RepeaterBook to get repeater information which can be found here:
www.repeaterbook.com
Here is a great website with tons of information on Chirp and Baofeng radios:
miklor.com/
Check out my Baofeng Radio Playlist: • Baofeng Radios
Check out my HAM Radio, Scanner, Walkie Talkie playlist: • HAM Radio, Scanning an...
If you liked this video you can see more like it here:
/ thesmokinape
You can also follow me on Twitter and Instagram:
/ thesmokinape
/ thesmokinape
Thanks,
TheSmokinApe

Пікірлер: 551

@mopedsscootersandcruisers6850 5 жыл бұрын

I'm new to the HAM world and this is the best video I've seen so far.

@TheSmokinApe 5 жыл бұрын

Awesome! Glad you liked it and thanks for the feedback!

@masons320 5 жыл бұрын

Thank you. I have been trying to program my radio all morning....took a nap and woke up to your video playing. You made it look so simple compared to other's videos. I actually got my radio programed for my area 😁

@TheSmokinApe 5 жыл бұрын

That’s great! Glad it was helpful.

@TBO49127 5 жыл бұрын

Finally after searching for 45 mins I came across a video that was straight and to the point, Great video, will help me come Monday when I get my new radio

@TheSmokinApe 5 жыл бұрын

Glad to hear it helped you out! 👍

@globaltroopresource5174 6 жыл бұрын

Awesome short video! It was exactly what I needed. I really appreciate the fact that you make the effort to cut out all the chatter and keep this short. No "ums" and "ahs" nor talking about "uncles in Saskatchawan." Just the facts. Thank you! I subscribed based upon this video.

@TheSmokinApe 6 жыл бұрын

+Global Troop Town Hall Thanks for the feedback and the sub. Glad to hear you found the video helpful.

@CRCfail 4 жыл бұрын

Yeah minus the dumb fkn intro with the beer

@GSGExtreme44 4 жыл бұрын

@@CRCfail Take the stick out of your ass and give the man a break -

@gnormanhayes 6 жыл бұрын

You just made something incredibly difficult into something incredibly easy thank you

@TheSmokinApe 6 жыл бұрын

norman hayes Awesome, glad it helped.

@arnaldosegui8810 4 жыл бұрын

Hello TheSmokinApe, I hope this message finds you doing well. My brother, I want to thank you for helping me program my uv5re radio. I tried doing it manually and it was very complicated. Your step by step video helped me program my radios. Please keep up the great work and be safe out there. I enjoy watching your videos!

@TheSmokinApe 4 жыл бұрын

Arnaldo Segui Glad it was helpful 👍

@hamgurl248 5 жыл бұрын

Thank you so much for this. I was racking my brain trying to figure why the channels were overriding.

@TheSmokinApe 5 жыл бұрын

Glad it was helpful for you!

@SouthWestFloridaLife 7 жыл бұрын

Thank god I found this.....awesome vid.......I didn't realize you can import repeaters directly from repeater book. So freaking cool. I am going to have a second Miller Lite now.......

@TheSmokinApe 7 жыл бұрын

Timothy Euler Awesome, glad to have helped you out! Enjoy that beer my friend...

@davideisenberger6197 5 жыл бұрын

Thank you so very much! Your time is greatly appreciated ! Its an "Excellent Video" Programming now will be easy.

@TheSmokinApe 5 жыл бұрын

Glad it was helpful 👍

@acidfroggy1194 5 жыл бұрын

This is the easiest baofeng programming video I've ever seen! Thank you so much.

@TheSmokinApe 5 жыл бұрын

Glad it was helpful 👍

@the.internet 4 жыл бұрын

Thanks and greetings from the UK. Just ordered a programming cable (my radio arrived today) and your tutorial has been very helpful, now I know what I'm going to be doing!

@TheSmokinApe 4 жыл бұрын

Glad the video was helpful 👍

@bocates4579 6 жыл бұрын

Best video yet, on how to program the baofeng uv5r. Helped out a lot!!

@TheSmokinApe 6 жыл бұрын

Glad to hear it helped, I wanted to make a video that made it easier for folks. Thanks for the feedback and for watching.

@Ron_C 7 жыл бұрын

Awesome tutorial! I've had an easy time of using CHIRP, I also use it on a Mac and also successful on a Surface Pro 3 running Windows 10. Agree, programming using the buttons on the radio is painful. I did, however, print off a programming menu and keep it in my radio bag (in the event). Having the ability to have multiple images saved with different channels/freq's is a huge plus.

@TheSmokinApe 7 жыл бұрын

Ron C Thanks man, you can export directly from repeater book to a csv file too which can be imported into chirp as well. Thanks for watching...

@brucemcfadden8906 4 жыл бұрын

Thank you for making this. Best tutorial on chirp I have seen.

@TheSmokinApe 4 жыл бұрын

Glad it was helpful 👍

@jbr84tx 5 жыл бұрын

Very helpful video. I used CHIRP to put some channels in my Baofeng, by typing in each frequency, name, offset etc.--a tedious process. I only did 10 channels, mostly local repeaters, and it took over half an hour. So Thanks!

@TheSmokinApe 5 жыл бұрын

Thanks! Glad the video was helpful to you...

@somorider587 4 жыл бұрын

thanks so much for taking the time to make this vid. it was very helpful. cheers, j-

@TheSmokinApe 4 жыл бұрын

Glad it helped! 👍

@Late2theShowagain 5 жыл бұрын

Thanks for the video. Your video was the one I chose to use because it's simple and to the point which made it very easy to do.

@TheSmokinApe 5 жыл бұрын

Thanks, glad it was helpful. 👍

@puremaledark8305 2 жыл бұрын

Ive spent about 20 hours trying to figure out the programming of my uv5r’s. I learned a lot but was still falling flat on my face. This was the help i needed

@TheSmokinApe 2 жыл бұрын

Awesome, glad it helped!

@jwyatt043 3 жыл бұрын

Thanks so much - my radio wouldn't download but your video included that you had to be in VFO mode. That did it!! thanks.

@TheSmokinApe 3 жыл бұрын

Glad it was helpful 👍

@jokerb2003 3 жыл бұрын

Great job on this video! I picked up my F8HP after a long time of being inactive and realized i forgot how to use it. Many thanks and 73

@TheSmokinApe 3 жыл бұрын

You're welcome!

@radiosnail 4 жыл бұрын

An excellent video. Having watched it (and got a programmin cable that worked!) I was able to program my Baofeng UV5R . Thankyou for your clear presentation.

@TheSmokinApe 4 жыл бұрын

Glad it was helpful! 👍

@bobmarchand2751 3 жыл бұрын

Great job! You covered all of what is needed to make it work. Now I will figure out how to take that configuration to another HT. I am sure that is easy, as well. THANKS!

@TheSmokinApe 3 жыл бұрын

Glad it was helpful!

@GSGExtreme44 4 жыл бұрын

This makes life so much easier - Thanks for posting!

@TheSmokinApe 4 жыл бұрын

GSGExtreme44 Glad it was helpful, thanks for watching 👍

@1stFlyingeagle 2 жыл бұрын

Well, it is nice running across a channel that you walk away with very useful information. Thank you. Well done. My cable comes in tonight.

@TheSmokinApe 2 жыл бұрын

Thanks Robert, glad you liked the video 👍

@1stFlyingeagle 2 жыл бұрын

Can't make it work to save my life. All I have is some Bluetooth USB and downloaded another driver but the computer refuses to see it. I have reached out to the company to see if they can make it work. Yes it is a Macbook Pro.

@gabrialavichai9615 4 жыл бұрын

Excellent. Very helpful. Thanks also for doing a professional job with this--easy to watch. Great for newbies like me. Thanks!

@TheSmokinApe 4 жыл бұрын

Glad you liked it 👍

@CyberFleamarket 3 жыл бұрын

Great job!! Especially the importing FRS and GMRS channels. I was going to type each one in. I have my cable, the sites and now I imported all the freqs I want.

@TheSmokinApe 3 жыл бұрын

👍

@mattweik 7 жыл бұрын

Much appreciated! I never knew you could simply import everything. I was going to websites and typing all the info into chirp. Now I just need to figure out how to program it to be a scanner for local police and fire.

@TheSmokinApe 7 жыл бұрын

+Matt Weik Check radioreference.com for local utility / fire / police frequencies...

@mattweik 7 жыл бұрын

TheSmokinApe thanks!

@mattweik 7 жыл бұрын

TheSmokinApe ah, I need to be a premium subscriber I guess to be able to upload all the channels.

@scottschaible5704 3 жыл бұрын

This is the best instruction I have seen so far on Chrip and it solved my problem I love u channels that solve problems Thanks Man Scott

@TheSmokinApe 3 жыл бұрын

Awesome man, glad it was helpful...

@JesseeSage 4 жыл бұрын

Great tutorial, worked like a charm. A little challenging doing it on Linux. I needed to add my username to the 'dialout' group, logout and logon, then all was good. Thanks

@TheSmokinApe 4 жыл бұрын

Glad it was helpful 👍

@jimk8140 4 жыл бұрын

Thank you for posting this great video, very helpful.

@TheSmokinApe 4 жыл бұрын

Glad you liked it 👍

@Trid2bnrml1 4 жыл бұрын

Oh My Gosh! You just helped me solve my CHIRP programming issue! I'll be able to use my new BF 5VR radio! Thank you!

@TheSmokinApe 4 жыл бұрын

Glad it helped 👍

@Trid2bnrml1 4 жыл бұрын

@@TheSmokinApe - I can download from radio to computer, BUT, when I try to upload to radio, that option is grayed out. It's recognizing my radio. Could I be trying to upload the wrong frequencies for this radio?

@TheSmokinApe 4 жыл бұрын

Are you sure you have the right model selected, correct port and cable is fully seated?

@kdiamond3623 3 жыл бұрын

Awesome easy to understand video. Thank you. I'm now a new subscriber!

@TheSmokinApe 3 жыл бұрын

Awesome, glad you liked it!

@ryandurapau4984 4 жыл бұрын

Great video. Simple and clear set up. Thank you for taking the time to make it.

@TheSmokinApe 4 жыл бұрын

Thanks, glad you liked it 👍

@saiyan-lord4714 4 жыл бұрын

@@TheSmokinApe when you mentioned "against the rules to transmitt" Did you mean without a license or did you mean not allowed to transmit on baofeng at all even with a license?

@markusschaffer9712 3 жыл бұрын

New subscriber. Thanks for the great video. Will make it easy peasy to program my CH-6 DMR radio.

@AntonioSanAntonio 4 жыл бұрын

Buenísimo video. Compré el cable Baofeng y las instrucciones eran inmanejables, peor más que abominables. Con Chirp y este video he resuelto mi problema.

@theCUBE403 4 жыл бұрын

Thanx alot for the video. I just got my first radio and this helped me understand the process a lot. Cheers

@TheSmokinApe 4 жыл бұрын

Glad it helped, thanks for watching 👍

@macemig601 3 жыл бұрын

Just bought a 6 pack of these radios for 115, thank you! I also want to set up a couple repeaters with these around my bug out shelter area to keep comm

@TheSmokinApe 3 жыл бұрын

Thanks for watching the video 👍

@Charile2077 3 жыл бұрын

Big ups for doing it on a Mac I was worried it wouldn’t work on my Mac

@TheSmokinApe 3 жыл бұрын

It does 🙂

@DannyWalker1949 4 жыл бұрын

I've had HELL with this CHIRP❕ BUT, YOU SIR PULLED ME THOUGH IT ALL.....for some reason I couldn't download CHIRP and when I finally got it I couldn't download to my HT. So I watch your video and it made it clear to what I had to do....And, IT WORKED. THANK's S0 MUCH. I SUP'ed to your channel also👍🏻

@TheSmokinApe 4 жыл бұрын

Glad it helped! Thanks for the sub 👍

@gregorgman 4 жыл бұрын

Thanks for the great video. I will give it a try.

@TheSmokinApe 4 жыл бұрын

Good luck with it 👍

@kosh14 4 жыл бұрын

Best programming video! I got so lost and confused with all the jabber from these other guys. Thank you!!

@TheSmokinApe 4 жыл бұрын

Glad you like it brother 👍

@garyfuzie1170 5 жыл бұрын

Best Video i have seen so far. To the point and helpful. Not like all theses others just rambling about there preferences and other info and sounding like babbling idiots. It is precise about how to use and program the radio. Thanks for the info.

@TheSmokinApe 5 жыл бұрын

Thanks, I made it because there really wasn’t anything good out there at the time. Glad to hear it was helpful 👍

@DeanO 7 жыл бұрын

That's impressive, who knew there was so much programming

@TheSmokinApe 7 жыл бұрын

There is a ton, trying to do this by hand is terrible. Many people get a radio, then turn it on and nothing happens and they get put off from the hobby. There is so much to learn with amateur radio, just trying to give a little back to the community... Thanks for watching Dean.

@Richard-mz7qu 4 жыл бұрын

New subscriber. Great instruction! The USB cable that came with the Baofeng UV-5R didnt work, so I found the one you recommended on Amazon. Thank you!

@TheSmokinApe 4 жыл бұрын

Thanks for the sub! The cables are a constant battle, I have one that worked fine for years then after a Windows update, problems. You want to make sure you have a legit Prolific or FTDI chip, there are clones of both. Then you want to make sure you have the correct driver for your chip which might not be the latest driver, hope that makes sense.

@jamesslick4790 4 жыл бұрын

@@TheSmokinApe Yep!, sometimes you need an OLDER driver. This is BTW true of a LOT of PC hardware! Most people think "latest" is best. Nope,Kiddos: You need the CORRECT driver for your hardware, And it's NOT always the latest!

@bryanbrosseau6248 4 жыл бұрын

Great info, thanks for this!

@TheSmokinApe 4 жыл бұрын

Glad you liked it! 👍

@gphilpot1 3 жыл бұрын

Nice easy to understand video. Thanks for keeping it simple and staying out of the weeds making it too technical.

@TheSmokinApe 3 жыл бұрын

Glad you liked it, thanks for watching 👍

@jamesslick4790 4 жыл бұрын

I like that you show that you can disable TX on either (or both) bands, (Many vids don't show this setting at all!). This is VITALLY IMPORTANT for those who buy these JUST to use them as a scanner. (These radios are a legit decent choice for "Railfans".) Plus,even NOW there are still places (Like here in Pittsburgh,PA) where most PD,FD and EMS is untrunked,analog UHF. If ANYONE is intending to use one as a JUST a scanner and wants to KEEP LEGAL, Disable TX on BOTH bands, that way you won't even accidentally transmit!

@TheSmokinApe 4 жыл бұрын

👍

@amysuresh4292 3 жыл бұрын

I first thought that this software was hard but when I looked at video's it is actually pretty easy. I even figured things out without a radio although i need to have one figured out the basic compartments of the software thanks

@TheSmokinApe 3 жыл бұрын

Glad it was helpful!

@fmsocal2310 3 жыл бұрын

Great video what ever it is that you're smoking keep with it makes understanding how to program the baofeng easy.

@TheSmokinApe 3 жыл бұрын

fmsocal #23 glad it helped 👍

@fmsocal2310 3 жыл бұрын

@@TheSmokinApe my apologies for the misspell "SmokinApe"😎

@TheSmokinApe 3 жыл бұрын

Haha!

@seahawkmjk 2 жыл бұрын

Great video- excellent narrative-

@TheSmokinApe 2 жыл бұрын

Thanks!

@danielwalker579 3 жыл бұрын

Finally a good videos explaining this thank you!!!!!!!!

@TheSmokinApe 3 жыл бұрын

Glad it was helpful 👍

@jeffreymaskrod8758 4 жыл бұрын

Good video, thanks

@MichaelA-sq9zv 3 жыл бұрын

Huge help, props!

@TheSmokinApe 3 жыл бұрын

Awesome, glad it helped 👍

@Lisa_Zapata 5 жыл бұрын

Looks easy... thank you. New subbie here!

@TheSmokinApe 5 жыл бұрын

Hope it was helpful, thanks for the sub!

@stevegamble2991 3 жыл бұрын

Very well explained thanks for this tutorial

@TheSmokinApe 3 жыл бұрын

Glad it was helpful!

@utkf16 3 жыл бұрын

Just what I needed thank you

@TheSmokinApe 3 жыл бұрын

Awesome!

@jgaffney6 4 жыл бұрын

Great Thank You for a very good learning video It helped me

@TheSmokinApe 4 жыл бұрын

Glad to hear it was helpful 👍

@Bradsyoutube11 3 жыл бұрын

Very helpful. Thank you!

@TheSmokinApe 3 жыл бұрын

Awesome 👍

@OldOwl 7 жыл бұрын

Great video, thanks!

@TheSmokinApe 7 жыл бұрын

+Allen Watson Awesome, glad you liked it. I get lots of folks with questions and I thought this mighr be helpful. Take care...

@HamRadio2 4 жыл бұрын

Great job!

@TheSmokinApe 4 жыл бұрын

Thanks man 👍

@jackmasterification 4 жыл бұрын

Great video buddy

@TheSmokinApe 4 жыл бұрын

Thanks, glad you liked it 👍

@Maine307 4 жыл бұрын

THANK YOU FROM GMRS WRDC307 !! THIS HELPS!!

@TheSmokinApe 4 жыл бұрын

The Midcoast of Maine, The Way Life Should Be ! Glad it was helpful 👍

@johnppg 4 жыл бұрын

Thank you.. Excellent video...

@TheSmokinApe 4 жыл бұрын

Glad you liked it 👍

@Pollys13a 3 жыл бұрын

Very helpful, thanks a lot.

@TheSmokinApe 3 жыл бұрын

Glad it helped 👍

@mikecarr1484 4 жыл бұрын

Great video

@TheSmokinApe 4 жыл бұрын

Thanks man! 👍

@brianrichard1768 4 жыл бұрын

This was helpful even for my uv-82c.

@TheSmokinApe 4 жыл бұрын

Glad to hear it Brian 👍

@imedina619 3 жыл бұрын

this video helps thanks!

@TheSmokinApe 3 жыл бұрын

Glad it was helpful 👍

@unclecow 4 жыл бұрын

Very informative great video man I miss my radio 😂

@TheSmokinApe 4 жыл бұрын

Thanks UC, glad you liked it 👍

@fasnuf 3 жыл бұрын

Excellent video 73's

@TheSmokinApe 3 жыл бұрын

Thanks!

@amysuresh4292 3 жыл бұрын

Thanks man I just got the software on my computer

@TheSmokinApe 3 жыл бұрын

Awesome 👍

@chandoucetconsulting 6 жыл бұрын

How to import the Comments from Chirp to replace the Name field? It's easier to recognize the frequency. The comments indicates the city. This was a great video.

@melissarainchild Жыл бұрын

Love this! Thanks for sharing. By the way, I always feel like a guest in your shack...grabbin' that "cold one" (though...coffee might be better for me 😉 as I dont drink...but hey)...

@TheSmokinApe Жыл бұрын

Thanks Melissa, glad you liked the video 👍

@EnriqueGonzalez-rm2wh 4 жыл бұрын

Follow your video to the letter except the beer lol...Man oh man I am all set and done...Thank you so much you know your s___t...thanks again.

@TheSmokinApe 4 жыл бұрын

Glad it worked out for you 👍

@dreadlock1977 3 жыл бұрын

Thanks a lot

@TheSmokinApe 3 жыл бұрын

Glad it was helpful 👍

@gnormanhayes 6 жыл бұрын

thank u

@TheSmokinApe 6 жыл бұрын

norman hayes No prob, hope it helped.

@roberttosa2560 4 жыл бұрын

That’s what I’m doing wrong... forgot the beer step.

@TheSmokinApe 4 жыл бұрын

That is the most important step 👍

@wanmohd9863 4 жыл бұрын

sir,how to install the software uv5r n connect the cable first ?

@jf5702 3 жыл бұрын

Is the cord listed on your Amazon list the correct one that you used? I'm seeing a few reviews that it does NOT work for the UV5R. Great video by the way!

@AGENT47ist 3 жыл бұрын

I recently got to ham radio with a uv 5ra and I like it as a hobby. My question is can you use the UV 5RA as a scanner to listen to police frequency or you have to do it through the programming cable?

@jonathanpratte1988 2 жыл бұрын

Thanks!!!!!!!!

@TheSmokinApe 2 жыл бұрын

You're welcome!

@truckerdaddy-akajohninqueb4793 4 жыл бұрын

Thanks

@TheSmokinApe 4 жыл бұрын

👍

@Desertdweller1965 4 жыл бұрын

MAC is a tough tutorial to find. Thanks.

@TheSmokinApe 4 жыл бұрын

Glad it was helpful.

@thecman26 7 жыл бұрын

Excellent video as always! What antenna is that on your radio?

@TheSmokinApe 7 жыл бұрын

+thecman26 Thanks man! It's just a stock Baofeng antenna.

@TheSmokinApe 7 жыл бұрын

thecman26 Sorry, its a Nagoya 771. I got my videos mixed up...

@cecilyt006 3 жыл бұрын

BOSS!!

@paulatkinson5938 5 жыл бұрын

I dont see my UV 9Rplus here do you know if chirp now supports this now

@pathopkins4500 6 жыл бұрын

Nice =)

@TheSmokinApe 6 жыл бұрын

Thanks, glad you liked it. Hope it was helpful.

@EnriqueGonzalez-rm2wh 4 жыл бұрын

Best video 4 star....

@TheSmokinApe 4 жыл бұрын

Thanks 👍

@billdomb 3 жыл бұрын

what are all the different alternatives under duplex, especially if programming FRS ?

@coolman5788 6 жыл бұрын

Hi thank´s for a great tutorial. I have a problem I have GT-3 but the offset does not transfere to radio, what do I do wrong?

@TheSmokinApe 6 жыл бұрын

Glad you liked it. Do all the other settings transfer? If you close Chirp and then re-open the config file, do you see the offset settings?

@tnbk97 5 жыл бұрын

Hello...thanks for the great video. In 5:08 in your video, I would like to know how to get the Name to display on line A, and the Frequency to display on line B on say, Channel 1; then on Channel 2, have that name on line A and it's frequency on line B...and so on. Thanks for your tutorial.

@TheSmokinApe 5 жыл бұрын

The A and B vfo’s are not connected. You will need to set A to “name” and B to “Frequency” then make sure both vfo’s are on the same channel.

@bassindanny4896 3 жыл бұрын

Funny cause I have a bud watching this great info bro

@TheSmokinApe 3 жыл бұрын

Glad it’s helpful 👍

@VideoByPatrick 4 жыл бұрын

Using the software, how can I enable the B_Shift scrambler mode for a particular freq like 467.860 ?> THANKS !

@TheSmokinApe 4 жыл бұрын

Sorry man, never tried that.

@fubarsnafu4994 3 жыл бұрын

fist time was a mess. second attempt was a hot mess. third time I wound up here and story of my life third time was the charm thanks.

@TheSmokinApe 3 жыл бұрын

Awesome Fubar, glad it was helpful 👍

@mike617 3 жыл бұрын

I’m having trouble, I get no drop down menu for port after hitting download from radio😩

@fubarsnafu4994 3 жыл бұрын

@@mike617 The bit I missed the first time was have the radio disconnected from the pc. When CHIRP starts then connect USB cable then turn radio on. Worked like a charm. My icom acted stupid first time around but after I linked up the way I described seemed to be fine.

@zzzxxzzz3248 2 жыл бұрын

Damn , I don't have a computer so I guess my radio is worthless ! What a jip !

@TheSmokinApe 2 жыл бұрын

You can program them from the keypad

@BryanKupko 3 жыл бұрын

Great Vid! Im brand new and Green to all this but I just ordered the USB -to radio cable from your amazon link for my UV SR ( the one I bought on ebay was $40, but you had a link to one for $25 ?) At $25 , I bought a 2nd one??? ... anyway do I need to down load the drivers for that cable---It mentions that it will auto download drivers ? Also, will I be able to custom name channels with Chirp? Im on a mac as well

@hankkaufmann4705 Жыл бұрын

Thank you! Really needed this. I noticed you didn’t mention anything about turning the volume all the way up to program like I’ve seen on other videos. Is it necessary ?

@TheSmokinApe Жыл бұрын

I’ve never had to turn it up 👍

@n6hpx 5 жыл бұрын

is there a upgrade on the software already installed

@TheSmokinApe 5 жыл бұрын

If you mean the firmware on the radio the answer is no, if you mean to Chirp the answer is yes... new releases of Chirp come out all the time. Hope that helps.

@mhussainahmed3842 3 жыл бұрын

What's the deference between channel mood and frequency mood?? Another think when you turn on the frequency mood it shows two frequency numbers one on top line and one on bottom line so what's deference between those two numbers or lines? Is it one to receive and one to send or something else?? Please let me know.