How To Programme A WLN KD-C1 In Chirp

Рет қаралды 75,350

Күн бұрын

Пікірлер: 55

@sylla2 4 жыл бұрын

Thanks dude! I have been struggling to find an easy guide to Chirp. And now I've found your video. Just what I needed! 🙂

@JohnKD8DVR 7 жыл бұрын

as always, a great video.

@RingwayManchester 7 жыл бұрын

Thank you John :)

@g1fsh 7 жыл бұрын

Thanks Lewis i will give chirp a go im glad that new radios are being added all of the time. Its a usefull program.

@RingwayManchester 7 жыл бұрын

Cheers Gary! Yeah it's a very good programme!

@benrec6 2 жыл бұрын

Hi, thanks for sharing. Have been trying to use my Retevis programming cable with the KD-C1 on my Mac but it doesn't seem to wanna recognise it under Port. Would I need to purchase a different cable do you know? Thanks, Ben

@masade6499 4 жыл бұрын

hi from your explanation its mean if i want to make same frekuensi between wln and pxton we need to choose which HT that we need to use the frekuensi and then same it

@ThraxMir4 4 жыл бұрын

i cant find the "power" hmm not included in show column too

@pompier1460 3 жыл бұрын

wats it mean about: The radio did not accept program mode after five tries. Check you interface cable and power cycle your radio.

@AngshumanTamuli 5 жыл бұрын

How to program my previous 4 sets radio with my new other 4 sets.

@MsKatYouLang 2 жыл бұрын

Hello using baofeng port for programming this wln is not cloning the 2 way radio with a model wln..y?

@pacoperes9411 5 жыл бұрын

Hello I have a WLN KD-C52 can I program with chirp?

@justineanneco 2 жыл бұрын

helloo, how can I change the model to KD-C1 Plus? There’s only KD-C1 in the options

@BoyeBanat 2 жыл бұрын

Thanks mate

@sangalanga9593 3 жыл бұрын

Can you programme this in chirp to 470-480mhz?

@bigjamessalvador9173 4 жыл бұрын

Hello sir how can i connect the channel of xt2 cignus to boefeng BF-888s

@Shack-time 7 жыл бұрын

Hi Lewis, James here.. just in case you'd forgotten who I was lol... great introduction to the world of chirp. Keep it up. More bloggs though please ?

@RingwayManchester 7 жыл бұрын

Haha! Thanks buddy, Vlog is coming Sunday rog!

@biranit50 3 жыл бұрын

does is cover kd-c1 plus as well?

@davidbergewaytogo 7 жыл бұрын

I've read the Zastone ZT-X6 (identical to this radio) can also use VHF frequencies with the right parameters... any truth to this, according to you? Can this be achieved in Chirp?

@RingwayManchester 7 жыл бұрын

I wouldn't have thought so no. They do VHF and UHF versions but none that cover both bands.

@elephantchat 3 жыл бұрын

Hi ! It said : Radio identification failed .... what can I do ??? Thanks

@zeandrodukelarena188 3 жыл бұрын

Please help me, it wont read on the chirp.

@Danielgom3z 6 жыл бұрын

Good friend, I bought a WLN KD-C1 radio and I still do not have the cable I can not program. At the moment I just wanted to use it as PMR but I do not know the source frequencies. Can you help with the list of 16 frequencies?

@RingwayManchester 6 жыл бұрын

Google them

@samglaim4274 7 жыл бұрын

Happy New Year :-) ... Chirp''s great for programming the likes of the Baofeng stuff (I use it for my hand held radios) but just wondering if there's any info about the Chirp team supporting the programming of DMR stuff? I dipped my toe into DMR in late 2016 (TYT MD-390) and the steep learning curve for DMR is not helped by pretty basic DMR programming software out of the box that's available. Thanks again 73

@RingwayManchester 7 жыл бұрын

Hi Sam, I've not heard of Chirp supporting DMR. I always find DMR programming very complicated! I still struggle now

@samglaim4274 7 жыл бұрын

Many thanks for the reply Lewis :-) .... Yes, DMR seems a great new technology... it would be good if they could bring out software that made it a bit easier... fingers crossed!

@RingwayManchester 7 жыл бұрын

Yeah I agree Sam, way too hard to do. I tend to leave it alone haha.

@wrongsideof40 6 жыл бұрын

Just about to order one of these from Bangood (a Zastone-badged unit). I have a bunch of programming cables for other radios. Is the cable a standard one or more like the the new BF-T1 cable, which seems pretty unique? Thanks

@RingwayManchester 6 жыл бұрын

It's like a UV-5R cable Martin :)

@wrongsideof40 6 жыл бұрын

In which case, I think I'm sorted. It's now ordered, so looking forward to have a play in the not too distant future. Thanks (G4EFE)

@MaximusPanin Жыл бұрын

Has anyone managed to save the message in the radio station WLN KD-C1 (Variant of Retevis RT22, Kenwood TK-F6 Smart) ? The message entry is not saved in the memory of the radio station. I save my phone number, and when reading I get the following characters: Embedded Message 1: % D% D)) 0 Embedded Message 2: u Du D 0 %1 D%1D 0'

@angelibernardino6679 5 жыл бұрын

why do you need to program it?

@alexemmerson5403 4 жыл бұрын

Hi Lewis, I have purchased a couple of Zeadio ZS-B1 radios and a programming lead. As usual, I'm having trouble connecting to them in CHIRP, and is probably the prolific driver problem? Do you know the prolific driver for windows 10?? Cheers Pal, Alex M0UTA I think these are pretty much a copy of the WLN radios.

@alexemmerson5403 4 жыл бұрын

I have used the Retevis RT22 software for the Zeadio ZS-B1. Worked a treat.. :-)

@RingwayManchester 4 жыл бұрын

Glad you sorted it Alex! Cheers mate!

@carlossantini3605 4 жыл бұрын

I tried Chirp on the WLN KD-C1, but I coudn't change the language from Chinese to English.

@axlcrisjohnlimpin4015 4 жыл бұрын

me too... 😑

@mzsty1211 2 жыл бұрын

what is a com port i cant do this :(

@Ndokiboyz 6 жыл бұрын

No i haven’t

@jonathancharlesferriols1208 3 жыл бұрын

How do you create a frequency that is private?

@01234slayer43210 3 жыл бұрын

There is an option to add ctcss/dcs on chirp, you wont hear other users of the frequency aside from the ones who have the same tone with you, but they can hear you. If you want a real private conversation on ham radio you’ll need a scrambler capable radio however it would be illegal to use it 😂