How to PROPERLY Install Wheel Spacers

Рет қаралды 669,893

8 жыл бұрын

In this video, I show you how to professional mount and install wheel spacers on your car. I am using Bolt-on wheel spacers in this application. For the front, I am installing a 25mm wheel spacer, whereas in the rear, I am installing 38mm wheel spacers. After all is said and done, my OEM wheels will be flush to my fender, I will be able to clear my BBK (to be released), and I will get more even lateral load transfer, resulting me in more traction. Thanks for watching!!
______________________________________________________________
3M Copper Anti Seize ▶︎ amzn.to/2tmMnOP
3M High Power Brake Cleaner ▶︎amzn.to/2ui1Vqb
My 25mm Wheel Spacers ▶︎ amzn.to/2vTATpt
My 38mm Wheel Spacers ▶︎ amzn.to/2nVn9WB
______________________________________________________________
Videos in Outro
Prevent Brake Rotors from Rusting ▶︎ • Prevent Brake Rotors f...
Wrapping Interior Trim Pieces ▶︎ • How to Vinyl Wrap Inte...
Please give it a like and follow :)
milmast Instagram ▶︎ / milmast
SickDips Instagram ▶︎ / sickdips
milanmastracci Facebook Page ▶︎ / milanmastracci

Пікірлер: 617

@mobilemechanic2815 7 жыл бұрын

Im sitting here with all the basic tools and this man just keeps pulling out tools from the woodworks lol

@Oaxmex346 3 жыл бұрын

😂😂😂

@crush9197 2 жыл бұрын

I had to spend 571$ on tools just to do the job because no mechanic wanted to do it for me😡

@Deafgamer-b1q Жыл бұрын

@@crush9197 if you become friend's with a mechanic he'll probably ask you to pay him a small fee to do it, no mechanic will do it cause they don't want to be blamed for an accident that accured on your car thats why

@JayRM714 3 жыл бұрын

I’ve had my wheel spacers on my car for over two years now and they’re still holding up great... This is literally the only video I would recommend for ppl.

@jaredharrell5751 2 жыл бұрын

how often do you have to re torque them and how big were the spacers?

@marshalkwt 2 жыл бұрын

@@jaredharrell5751 re torque every 5000 miles

@alsuave21 8 жыл бұрын

great video..finally a before and after demonstration

@brionbraziel7968 3 жыл бұрын

Absolutely goddamn right, no unnecessary talking and opinions, just straight down to the point...

@stylo_tib9029 8 жыл бұрын

you also need to re-torque them after a day or around 100 miles of driving after installing wheel spacers or whenever you change a tire.

@h3ll0_2 4 жыл бұрын

Seems like too much work for me. I'll stick with standard.

@jenssenvaldez3051 4 жыл бұрын

or use red/blue loctite

@increase9896 4 жыл бұрын

I know this comment was a long time ago but I have a question: Do you have to re-torque just the spacers onto the car, the wheel onto the spacers or both wheel and spacers?

@sluggs007 4 жыл бұрын

@@increase9896 well, since you have to take the wheels off to get to the spacers........lol

@thomasleete864 3 жыл бұрын

@@increase9896 Both wheel and spacers. if you don't torque one of them they will fall off during driving and that is a very expensive mistake

@ZeusAndKiller 4 жыл бұрын

This was a really well done video. I was expecting you to babble on for 20 minutes like most diy KZfaqrs. Thanks!

@Vesurka 7 жыл бұрын

Great video. Well spoken, well shot and to the point. Thank you.

@bryantgiron2165 Жыл бұрын

This is literally one of the best car videos out there. I wish I saw everyone with car videos explain clearly, be well spoken, and be very informative like you

@milanmastracci Жыл бұрын

Thanks Bryant! Happy to hear you enjoyed it

@alexakasloth 2 жыл бұрын

Nice vid, right to the point and the before and after comparisons were really helpful. Looks much nicer.

@flyboy8282 7 жыл бұрын

dude thank you for all your information you are helping me out so much and it ain't even funny

@DanielOrtegoUSA 7 жыл бұрын

Very helpful and well produced, so thanks for posting.

@erblinkurtishi1878 8 жыл бұрын

Dude, your blinker fluid is so low..

@Tr33Tr331 8 жыл бұрын

😅😅😅

@mr17fyve 8 жыл бұрын

god damn it gavin

@itsjustatapbrohhh7779 7 жыл бұрын

Erblin Kurtishi what blinkers need fluid fuck havnt did mine in years

@MrBury74 7 жыл бұрын

What the hell is a blinker that needs fluid?

@RoninOC 6 жыл бұрын

Erblin Kurtishi just had to buy new piston return springs.. damn shame

@123antknee 5 жыл бұрын

LOOKS A LOT BETTER!!! (before and after)

@HFIntegrale 7 жыл бұрын

Excellent, perfect video. Seriously. Thank you

@zantumal8543 4 жыл бұрын

Man, really good video, didn't think about using that no corrosion brake coating. Really good information, keep up the good work man! :D

@ibo1137 4 жыл бұрын

Thanks for the video. I'm getting these kind of spacers.

@DUBZzDave 7 жыл бұрын

can't believe how far in the wheels sit standard! looks terrible! much better with the spacers.

@The_Noticer. 3 жыл бұрын

I think it's because they don't want the track to be wider than x-amount. But make the car bigger nontheless. Had the same on my Honda Accord CU1.

@1800BusterCheeks 4 жыл бұрын

Good vid! You have me sold!

@j.jarvis7460 8 жыл бұрын

Cooool... Exactly what I was looking for ;)

@carlos1989com 6 жыл бұрын

Glad you did the hub centric spacers.

@dakosyoutube6232 3 жыл бұрын

Awesome video good explanation and great ending

@mikeybrowne7412 2 жыл бұрын

VERY GOOD PRACTICAL AND INFORMATIVE. KEEP IT UP.

@Riyadh1044 7 жыл бұрын

Great Video man...THANKS!

@ThatHondaChannel 6 жыл бұрын

Excellent video Milan! BTW aluminium doesn't corrode the way you think it does. The corrosion is called aluminium oxide which turns to a really hard layer (surface). That hard layer actually protects the aluminium from further corrosion. Not saying the added insurance isn't necessary because I would do the same thing your doing.

@Sobriety5424 4 жыл бұрын

Love this video. Keep it up bro. 👍🏻

@mattharriss3835 5 жыл бұрын

You did a great job on the video. Great suggestion on the anti-seize. It may not be necessary for everyone but it's not bad to suggest one might benefit from it.

@bbqnewb 4 жыл бұрын

Great video! Great info and well presented. Subscribed!

@geraldbraxton8709 5 жыл бұрын

you did a very good job..nice vid..!

@JICE-zd7vo 8 жыл бұрын

Nice video, I like the copper grease idea. I'm going to try that.

@lindvallpaul9861 3 жыл бұрын

was it good ?

@wqsnsr8 2 жыл бұрын

Very well made video...keep it up

@OhGoshJosh 8 жыл бұрын

You're videos are the best man! i've probably seen all of them in these past like 2 weeks and I've done a lot to my car this week thanks to you! I was wondering if you can possible post a video on how to add the sound deadening to a car and how to take off different panels of a car, how to change lights to some aftermarket ones, more stuff under the hood like changing the headers of your engine. Haha you made me want to do so much! Can't wait for future videos! See ya later!

@milanmastracci 8 жыл бұрын

+JoshJimenez64 Funny you mention that :) Take a guess what the next video coming out is lol

@thisisntsergio1352 3 жыл бұрын

Dude I saw your video on your awning like yesterday haha and here I am again

@jonassalazar1447 5 жыл бұрын

Damn great video I subscribed

@AnotherAverageSniper 8 жыл бұрын

Great video man!!!

@milanmastracci 8 жыл бұрын

+GT-Rrrrrrr THanks man!!

@taylorkearns1333 8 жыл бұрын

Perfect tutorial . Well done :) Gold star bro ⭐️ Thank you

@akhataybeh 6 жыл бұрын

you deserved my like

@ZeusAndKiller 4 жыл бұрын

Your car looks a lot better now!

@gavinclark50 Жыл бұрын

That anti sieze aint gonna hurt sheit lol good shit bro

@MangoMousse888 4 жыл бұрын

Good vid bro, thanks

@4dangler 8 жыл бұрын

Good informative video. Thanks, man.

@milanmastracci 8 жыл бұрын

+4dangler Cheers buddy :)

@MYute87 8 жыл бұрын

another great video and another mod I want to install. 2016 is going to be killa to my 2012

@milanmastracci 8 жыл бұрын

+MYute87 Thanks man!! :) I wanna see before and after pics!!

@tylerschorovsky8069 4 жыл бұрын

great video broski!

@milanmastracci 4 жыл бұрын

Thanks buddy! 👊

@lijianping6622 8 жыл бұрын

nice suv bro，like it

@MechRider89 8 жыл бұрын

anti-seize was the only thing you did wrong, it's the equivalent of spreading some mud between your rotor top hat and rim, you don't want there to be anything between the rim and mounting surface its attached to. if your that worried about corrosion simply clean/paint the rotor and hub assembly. Most people should never have to worry about wheels being seized to the hubs, most people change they're tires ever 3-4 years and as long as you actually wash your car your fine.

@313mikido 8 жыл бұрын

+MechRider89 most people rotate there tires

@jasonobrien2846 6 жыл бұрын

Wrong. I worked with Chrysler engineers. They always said torque and anti seize everything.

@MrNickyDalenz 5 жыл бұрын

They're tires..... they are tires Their tires..... the tires on that persons car. Rotate there tires..... the place where the tires where rotated. Rotate their tires..... rotating the tires that person has on their car.

@TalsmaBRT 5 жыл бұрын

@@jasonobrien2846 Anti seize is for threads not mating surfaces. Maximum clamping forces need clean mating face.

@0hjaa3.06 4 жыл бұрын

@@jasonobrien2846 And they are Americans so... yeah..

@MrTruthislight 4 жыл бұрын

sick bro

@joseargueta9156 7 жыл бұрын

Great video and nice car

@jamesmendell6763 6 жыл бұрын

I think so .really helpful to us.Great.

@shafikhan7571 2 жыл бұрын

it was helpful thanks

@michaelmorales6001 6 жыл бұрын

Great video! Im about to order some but before i do , do i measure my new off set rims or my original hubs? You should make a video of how to measure spacers

@nomadsteve5297 3 жыл бұрын

Thank you 👍

@CarlosGarcia-ij4yg 7 жыл бұрын

Sooooooo much better.

@V4_Cyber 7 жыл бұрын

Great video bud

@milanmastracci 7 жыл бұрын

Thanks buddy :)

@brandonshultz2925 7 жыл бұрын

Arandules

@JustinKelly 8 жыл бұрын

GarageLine spacers are really good! Also better IMO because they are paint black.

@Elevated618 7 жыл бұрын

Thank you

@seekqa3881 4 жыл бұрын

I run blue lock tight too on the studs both spacer and hub ... I’ve had mine come loose from vibration

@tatim8118 8 жыл бұрын

Have a Merry Christmas Milan!

@milanmastracci 8 жыл бұрын

+Tatiana M Thanks Tatiana!!! You too :)

@KensGarage. 4 жыл бұрын

Dude you totally just helped me with my 3000GT. I've never used spacers before and I was trying to put them on the wheel hub BEFORE the rotor haha. Im such a tard

@milanmastracci 4 жыл бұрын

Its all good Ken! Ensure you use your torque wrench twice, once to install the spacer to the hub, then the wheel to the spacer 👍

@curiouscharacter1 3 жыл бұрын

I gotta admit, when I selected your video I saw your face and thought "dayum! What's this young kid gonna be able to tell me?" But, I was very pleasantly surprised. You covered it all from A-Z, mentioned some things I hadn't even thought about and didn't spend all your time stuttering and covering extraneous and non-relevant material. Thanks and kudos to you!

@JUKE179r 6 жыл бұрын

Cool suede PUMAs.

@ketchup9187 4 жыл бұрын

Installing 1.5 in spacers in all 4 corners on my slammed 8th gen accord coupe today much excite

@davec431 4 жыл бұрын

Post a video

@ketchup9187 4 жыл бұрын

@@davec431 i dont have the car anymore bro but they held up great never had issues and even changed wheels a couple times. Make sure u use thread lock medium strength everytime and gently clean threads and everything is seated properly and will ride and function like normal wheels

@johnm9662 8 жыл бұрын

Nice video

@milanmastracci 8 жыл бұрын

+LND Life Thanks :)

@mohdhafiz8615 3 жыл бұрын

nice vidio broo

@ChucT_TV 6 жыл бұрын

Just got these in the mail today. 25mm front and 38mm rear wheel spacers. The link for the 25mm wheel spacers listed are out of stock so I got the same brand as the 38mm link.

@JonsDiary 6 жыл бұрын

chuct23 do you have hfp or stock suspension? Wondering if its gonna rub if lowered

@singsongbum Жыл бұрын

thanks bro

@milanmastracci Жыл бұрын

No problem Will!

@luqmanbaig2504 8 жыл бұрын

I was considering getting spacers for my 8th Gen coupe as well! Now I have a food idea on how to install them if I do end up buying them. Thanks!

@milanmastracci 8 жыл бұрын

+Luqman Baig Not a problem buddy!! :)

@brandonsever2576 8 жыл бұрын

Be sure to get some wider rims to make sure that you're not adding any uneven pressure on your wheel bearings. Wheel spacers alone will put more force on to one side of the bearing than it's designed for, which leads to them wearing down faster and possibly damaging them over bumps.

@crush9197 2 жыл бұрын

@@brandonsever2576 How often do you re torque them?

@kvwheelpartspro5235 6 жыл бұрын

Cool

@dairyjerry2455 4 жыл бұрын

I've been wondering about the re torque and how that works? Do u wind up having to take off ur tire to re torque the spacer and then 100km later re torque your wheel?

@vincentmeredith2561 6 жыл бұрын

Those spacers come in handy when you habe a bbk and deep dish wheels too.

@milanmastracci 6 жыл бұрын

Yes they do!!

@WantedGun1 8 жыл бұрын

You should consider ceramic brake pads to reduce 70% of brake dust

@oh_look_bananas 2 жыл бұрын

I only use asbestos pads.

@ahmedahaggag 8 жыл бұрын

Wow that looks so much better, especially with the car lowered. They leave so much space for the wheel for some reason.

@milanmastracci 8 жыл бұрын

+Ahmed Haggag Yeah it makes a huge difference!!

@ahmedahaggag 8 жыл бұрын

excuse my dumb question but is it going to effect the ride in terms of how the suspension works or is that all the same?

@milanmastracci 8 жыл бұрын

Nope. All should stay the same. The springs are going to react the same way, and your car is going to ride pretty close to how it was, the only difference is that because you have a wider track, when you turn, you will get a bit more grip :)

@amyaries1342 3 жыл бұрын

good

@saluddin3622 6 жыл бұрын

Hi I am big fan! Question: are wheel spacers safe? Do they hurt the car?? Will the wheel roll off?

@Vicsince 7 жыл бұрын

Quick question if you don't mind? How did you know what size to get to make them flush? I have a 2006 accord trying to do the same. But I'm sure each model and year is different. Thanks for time!

@BarelyRice 8 жыл бұрын

hey, i have an 8th gen accord as well, the link for the 38mm spacer isn't working though, could you post up another one?

@winking2928 4 жыл бұрын

Great job! I think you will need a hub ring, your wheel didn’t sit well on the hub

@albert333pool 4 жыл бұрын

Wow super informative! Really enjoyed the thoroughness of the video. Do you mind me asking why you went with 25mm in the front and 38mm in the rear? Lastly, did you use the stock lug nuts?

@1Smallen23 4 жыл бұрын

In his case he can use the stock lug nuts but for me I have lug bolts for Volkswagen and when I order spacers I will have to get longer bolts to compensate for the extra length (Spacer Size)

@kevinaalberts9251 4 жыл бұрын

@@1Smallen23 ,how do you know???

@JonsDiary 6 жыл бұрын

Hey Milan, i have an 8th gen like yours but mine is hfp so lowered a bit. You think it would rub? Not really concerned about the rear but im scared the front will rub especially while turning. (NOT willing to fender roll or to stretch tires)

@RMRNetwork 6 жыл бұрын

Although wheel spacers tend to get stuck after long periods of use, please don't use a large amount of anti-seize.. you don't actually want your wheel spacers vibrating around because of a lubricant

@CaseTheCorvetteMan 9 ай бұрын

Yep, straight on clean and dry.

@valkyr_rl7169 6 жыл бұрын

Should I add these on my 07 Tacoma?

@314roberts 3 жыл бұрын

After 5 hrs of prying, kicking, and swearing to separate the spacer off the hub. I will ALWAYS apply antiseize. I rotated my tires about a yr ago and live in Colorado. It was absolute hell and was unsure it would come off..

@mcmc-o9w 8 жыл бұрын

Hey I know there have been news around the interwebs about wheel spacers causing more stress to your ball bearings. Is there any truth to this? I'd love to hear your long term review on this man. Thanks

@_vindicator_ 2 жыл бұрын

good tutorial, may be quicker to coat the back of your alloy with copper grease instead touching the bolts on the spacer.

@Vannyvann7420 8 жыл бұрын

What are some of the cons to adding wheel spacers to your vehicle

@wil_mil_man 2 жыл бұрын

Great video! Only one thing would have nice to see a front and rear pics before and after just to see the difference in the offset of the wheels!?

@milanmastracci 2 жыл бұрын

You mean exactly what I did at the end of the video?

@wil_mil_man 2 жыл бұрын

My apologies there! Apparently for whatever reason the video stopped in me prior to your very ending of the before and after! Great job!!

@milanmastracci 2 жыл бұрын

No problem Wil. Thank you 👊

@nameme5 3 жыл бұрын

Nice hood drawing at 4:48

@milanmastracci 3 жыл бұрын

LMAO I never noticed that!!!

@jasontaylor54 5 жыл бұрын

Is there any other way to tighten the spacer bolts to the hub by ourselves, or do we need another person to step on the brakes?

@xavierasuncion1608 6 жыл бұрын

Question here, plan to buy a new alloy wheels with 8 inch width. But my stock wheel is 7 inches. Do you think it does fit for 185 tire?

@tonyblanco4799 5 жыл бұрын

Do I need anti seize if I’m only using the spacer for the summer ?

@frenchieblack1 7 жыл бұрын

Do you have to keep torquing down your spacers periodically ?

@theexpendables1089 7 жыл бұрын

what size rotor would I need for a 4 piston caliper? and do the adapters come with the caliper kit?

@byBirthh 7 жыл бұрын

Does these fit a 2009 Acura TSX ?

@ChocoLate-yf4xo 4 жыл бұрын

Do I need to do wheel alignment if ever I put 10mm spacer in the rear?

@jacobcosgrove3121 8 жыл бұрын

Awesome video bud. Are these still on your car? If so, how are they doing? Any trouble? How are they on interstate? How often do you check them/re-torque them? Sorry for so many questions, I just want to be somewhat educated on spacers and caring for them before I go out and buy some for my ST.

@jeffreyjackson4425 7 жыл бұрын

any issues with handling due to change in the scrub radius?

@6sphere_ 8 жыл бұрын

this works with 25 mm coversion spacers. 4x100 to 4x114.3?

@30-06 2 ай бұрын

Eye protection is a must.

@ConnorMagrath 7 жыл бұрын

how come you used different sized spacers for the front and back?

@rlbug86 4 жыл бұрын

I'm sure you know by now but since no one ever answered your question the wheel wells are wider in the back so to make it flush he used bigger ones in the back. A lot of sports cars use wider tires in the back to keep it flush with the wheel wells

@ramismusic9 7 жыл бұрын

Can i use LED lights for my honda are those legal

@w33k3nd5 6 жыл бұрын

yo bro my car sterring wheel started bubbling alot after installing spacers. i got the wheel alignment and balancing done as well .is there any way to stop wheel bubbbling .