How To Properly Use A T-Tap Wire Connector

  Рет қаралды 20,687

Bill Of All Trades

Bill Of All Trades

Жыл бұрын

Purchase connectors on Amazon:
T-Tap Wire Connectors, 22-18 AWG... www.amazon.ca/dp/B09N92FJ8J?r...

Пікірлер: 27
@TreyTheRarity
@TreyTheRarity 7 ай бұрын
How far does the wire need to be placed in the wire connector? Should it just be in the tunnel where its being crimped or does it need to be exposed on the flat part?
@BillOfAllTrades2016
@BillOfAllTrades2016 7 ай бұрын
When done properly, The exposed wire should be just in the tunnel where you crimp. So another tip I forgot to mention is that if you look at how long the tunnel part is, that will give you an idea of how much insulation to trim off your wire so no wire is exposed. Hope this helps. Thanks for watching. Please like and subscribe
@JM_Studios
@JM_Studios 8 ай бұрын
I’m assuming u can use this on a positive and negative wire for let’s say a speaker wires ur trying to connect?
@BillOfAllTrades2016
@BillOfAllTrades2016 8 ай бұрын
Yes that’s correct. It will work on both positive, negative, and ground wires. Thanks for watching. Please like and subscribe
@iadonutguy5894
@iadonutguy5894 Ай бұрын
Are you doing all 3 separately?
@JB-by8tw
@JB-by8tw 12 күн бұрын
thank u!
@BillOfAllTrades2016
@BillOfAllTrades2016 11 күн бұрын
You're welcome! Thanks for watching. Please like and subscribe
@clarenceroller7897
@clarenceroller7897 10 ай бұрын
What is the name and where did you get the wire stripping tool?
@BillOfAllTrades2016
@BillOfAllTrades2016 10 ай бұрын
They are called self adjusting wire strippers. They can be purchased from amazon. They cost less than $20. Thanks for watching. Please like and subscribe
@bizarrehazar
@bizarrehazar 2 ай бұрын
I've watched several videos where the wire that's being tapped into is not peeled back at all with the wire stripper. and the locking tap is placed directly on the coating of the wire. how would that even work if the metal of the locking tap isn't making contact with the wire/copper itself? am i missing something?
@BillOfAllTrades2016
@BillOfAllTrades2016 2 ай бұрын
The manufacturer says to just push on and the tap is supposed to cut into the wire, however in my experience the blades in the tap are so dull that they only kink the insulation but don’t penetrate. Perhaps the other videos featured a different brand of tap that pierces the insulation better. But I think it’s best to pierce it first. Makes a better connection. Hope this helps. Thanks for watching. Please like and subscribe
@user-xt6mp9ek3w
@user-xt6mp9ek3w Ай бұрын
Fully agree. If one chooses the correct size of the T Tap for the cable to be connected, peeling back the sleeving is really unnessary. Also, with the peeling, it exposes more of the copper and this is more susceptible to shorting.
@itsuplike9947
@itsuplike9947 17 күн бұрын
I think this is why my back up cam didn’t work
@gwyneth6045
@gwyneth6045 3 ай бұрын
I want to connect my LED DRL lights with T-taps. My problem is, the wires from the LEDs are really tiny, and I can't crimp them into the connector. Please do you have any advice for this?
@BillOfAllTrades2016
@BillOfAllTrades2016 3 ай бұрын
What gauge wire are you trying to tap into? And what guage is the connector?
@gwyneth6045
@gwyneth6045 3 ай бұрын
@@BillOfAllTrades2016 Im taping into my parking lights wire, which is successful. But Im not able to crimp my wire from LED strips, bcs they are smaller and they dont hold in the connector.
@Lkom24
@Lkom24 20 күн бұрын
@@gwyneth6045 you need a smaller guage ttap
@MarioSumilat
@MarioSumilat 4 ай бұрын
Hi, can this type of connector use for home wiring electrical 220v ie?
@BillOfAllTrades2016
@BillOfAllTrades2016 4 ай бұрын
No definitely not. You will need to go to a hardware store and ask them for the correct connectors for home electrical. These are only for low voltage accessories.
@MarioSumilat
@MarioSumilat 4 ай бұрын
@@BillOfAllTrades2016 thanks for the info. The low voltage acc ie : car, audio, correct?
@BillOfAllTrades2016
@BillOfAllTrades2016 4 ай бұрын
Yes that’s correct
@Electronzap
@Electronzap 3 ай бұрын
Nice.
@BillOfAllTrades2016
@BillOfAllTrades2016 2 ай бұрын
Thanks for watching. Please like and subscribe
@user-qm1ri7fg7h
@user-qm1ri7fg7h 5 ай бұрын
I mean is this safe and how long does a connection like this last ?
@BillOfAllTrades2016
@BillOfAllTrades2016 5 ай бұрын
Why would it not be safe? I wouldn’t demonstrate a method if it wasn’t safe. The application will define the outcome of how long it lasts. Things like outdoor may be shorter life then indoor. Wet vs dry environment. At work we have these on a forklift for ten plus years.
@thatwidechevy
@thatwidechevy Ай бұрын
Do you have the link for these?
@BillOfAllTrades2016
@BillOfAllTrades2016 Ай бұрын
Yes here it is. T-Tap Wire Connectors, 22-18 AWG... www.amazon.ca/dp/B09N92FJ8J?ref=ppx_pop_mob_ap_share Thanks for watching. Please like and subscribe
路飞太过分了,自己游泳。#海贼王#路飞
00:28
路飞与唐舞桐
Рет қаралды 11 МЛН
Женская драка в Кызылорде
00:53
AIRAN
Рет қаралды 465 М.
A little girl was shy at her first ballet lesson #shorts
00:35
Fabiosa Animated
Рет қаралды 9 МЛН
Which Splicing Device is Best?  Push Ins Vs. Wago Vs. Wirenuts
13:06
How To Home
Рет қаралды 1,3 МЛН
Using the Posi-Lock, Posi-Tap and Posi-Twist
3:05
webBikeWorld
Рет қаралды 203 М.
Solderless Wire Splicer
9:08
Cool Tools
Рет қаралды 21 М.
Why you should NEVER solder wires on your car.
18:06
Irvin Ortega
Рет қаралды 389 М.
How to Extend Short Wires | Easy Fix Anyone Can Do
6:52
The DIY Guy
Рет қаралды 2,9 МЛН
HOW TO STRIP CRIMP AND CUT THOSE WIRES!
17:44
Caliber8 Tools & DIY
Рет қаралды 136 М.
🛠 How To De-pin Connectors | TECHNICALLY SPEAKING |
26:13
Haltech
Рет қаралды 1,5 МЛН
Debunking the Pros: Can WAGO Lever Nuts Handle Heavy Electrical Loads?
9:17
Everyday Home Repairs
Рет қаралды 362 М.
1234 л.с. Lucid AIR SAPPHIRE разгон 0-300 км/ч
0:59
DSC OFF
Рет қаралды 3,1 МЛН
МотоТаня самая популярная байкерша
0:36
Кораблев с улиц
Рет қаралды 2,1 МЛН
что за звук?
0:15
Мурат 07 манипулятор
Рет қаралды 559 М.
ФЭТБАЙК vs MTB Что лучше ? #shorts
0:21
Леха МАК
Рет қаралды 842 М.
T55 Narxi 23 900$ 📞95 155 03 00 | 📞91 033 03 03
0:18
China Avtouz
Рет қаралды 3,3 МЛН