Have to say this was explained and demonstrated quite clearly and concisely. Very professional tutorial. Thank you.

Whoa, I was like 17min for a wire stripper vid, too much. But as I started watching, I was like oh, this is good info. Very informative, and thank you for taking the time to explain in detail!!

17 minutes well spent! I've never been able to figure out what the other bits were for when I've been stripping wire. The screw cutting holes have blown my mind haha. Cheers from the UK!

You know, I've been using this tool for nearly 40 years never knew about the screw cutter/threader part. Great video. Thanks

Wow. People like you make our lives so easy. This is a great tutorial and simplified. I always wanted to know how to crimp and what those other holes and markings were other than the stripper. Much needed. Appreciate 👍

Just started as a Field Technician, and had this tool for a long time. Never realized it was so many functions in this ONE tool...thank you !

Man, where was this video when I first realized how little I know about this stuff. After a phone call with my dad, my suspicion of what I needed to do seemed correct but most of the learning has been by trial and error. I still needed some additional information like having the split lined up with the tool for the best contact which has been my biggest problem (loose crimps).

Many thx for your informative instruction on how the crimpers work. I had no idea on how they work.

Thank you so much for taking the time to create this video. Imma be honest I always thought that electrical work was too advance for me to get my head wrapped around but because my dad's starter motor went out I had to try and help him out. Nobody ever taught me how to use tools but thanks to the internet and gentlemen such as yourself providing information for those that don't know I feel confident i can properly do what I need to help out around the house. Thanks and bless you!

Thanks for a great lesson. Your close-up video is also excellent!

Thank you so much man! I’ve been looking everywhere for a tutorial that gets right to the point and doesn’t try to advertise or convince me to buy anything! You have my like and subscribe!

Great stuff Dillon, thank you!

Thank you for your video. I just bought a tool similar to this one and I don't know a single thing about it until I come across your video. Your information is much appreciated.

Very helpfu video. Thanks!

That was incredibly helpful, much appreciated!

Knowledge is important. Great job!

thank you for the amount of detail. I love how you showed the correct method and then showed what to avoid. I have to do some DIY wiring for ham radio and know how to use the crimping tool.

Thank you SO much for this clear explanation!

You’re a good teacher. Thank you .

Great video, thank you

I just bought one today! I can't wait to flex! LOL THANK YOU!

Great tutorial! Thanks for the help!!

Excellent explanation, thanks!

Useful information. Thanks !!

Thanks for this! Definitely useful

Thank you. Very helpful review

great video mister. Thank you

Simple, down to earth, easy to understand. Nicely done, thanks a lot.

This was extremely helpful. Thank you so much!!

I appreciate the way you explain things.

Excellent tutorial - very detailed and comprehensive. Great job.

Thanks a lot for this. Some great info and very easy to understand and digest.

Great job explaining 👍🏾

Great tutorial! Thanks so much.

Thank you. Straight to the point for newbie. No unnecessary low yield info. Sub.

Very clearly explained. Thank you.

Bravo!! Thank you for demonstrating and thoroughly covering each aspect of the wire crimping tool. Excellent job!!

EXCELLENT! Thank you so much. This was very helpful.

Nice ! Thanks

Thank you for the most educative tutorial ever 🙏

Thank you so much for this tutorial. I have a wire stripper at home, and you just made it so easy for me to understand how to use the tool. 👍🏼

Excellent video!! This helped me a lot. Thank you!

Excellent tutorial. Well done. Very clear. Thank you.

super easy to understand your explanation about this tool!! thank you !!

Excellent video. Thanks for sharing this information.

Thanks for a great explanation.

Very useful vid! Thank you very much!

Excellent instructional video! Thank you for taking the time to explain this process in such a detailed manner. It's perfect!

Excellent explanation, many thanks 👍

Great tutorial. Thank you.

awesome video Sir!

thank you brow 😊👍🏾 very useful lesson

Very good informative video, thanks.

Great video

Great video. 💯

I enjoy your conversational tone. Feels like you’re directly talking to me. I was looking for a review of a totally different cutter crimper but stayed to the end just because. 😁

Thank you very much.

Thank you. I just bought one of these and didn't know how to use it, except for the wire cutter and stripper. I did a little project as I watched. Thanks again!

Thankyou very much. Im alone and needing to learn these things now. Messed up 4 ring terminals before i watched your channel. Very clear, easy to follow

Thank you very much! Finally a video where the whole clipers are explained.

Thank you very helpful

great tutorial sir.

It helped me complete my job! Excellent video , thank you

Excellent! I am not much of a handyman so this really helped me. I had been lucky enough to have selected this exact tool at the store, before even seeing your video. Thanks again for a very clear presentation!

Thank you so much for your dedication. Everything has been well detailed I really appreciate you to be honest you are a well explanatory in detail teacher I wish we have more people like in the world

Well explained

You're the bomb! Thank you...😊

Good job

I've got my one for quite some time and I haven't been using all the futures yet. This is a very thoroughly explained video. Thanks!

Thank you for the video very useful. I love this tool. It's a must need for any tool box. A lot of electricians will say that it sucks but at the end of the day it does work and when the time comes and you need to get the job done it will get it done. I have used it in many major jobs and it has kept true for years. Also it's great for electrical outlets for cutting down those screw sizes which sometimes are to long. Knowledge is power. I really appreciate the video I wish to do some myself fixing stuff.

Best all around video on these subjects I've seen. I'm heading to the radio shack to cut, strip and crimp. Thanks.

Just got one of these tools. Really appreciate the insightful education on it. I like how thorough it is and that you've used the chapters so we can skip what we personally don't need to know. Thank you!

Hey man thanks I like so mucho this video now I'm subscribed

Nice video,wellexplained👍🏾

Very good.

Thank you so much brother for this. I’m 39 and now getting into cabling as career change. Keep teaching. Peace.

Thanks uncle!

PC Speakers messed up and just got it fixed, Thanks for the video man💯

Thanks for the great information it was a great help to me again thanks

Wire cutting, stripping and crimping all in one tool. So far I have got by without one just by using the pliers that were already in my tool box. Still a very informative video and this tool is a lot cheaper than others if you want to keep just one tool with your box of connectors.

Rock Solid video Bud!!! Had no idea that these things can cut and rethread screws!!! Thank You!!!!!!!

Well done sir.

Really good tutorial on how to use the cutter/crimper tool that I have had forever but did not know exactly what the various sections were for. Thanks for the thorough demonstration. Best of luck to you in your efforts.

Thanks man!!!!

You are alright! Very good explanation, and anyone could learn from you!

Thank you! I was unsure how to use my kit to fix the wiring of my Fiat 500 gate lights. This was so very helpful.

Thanks for sharing subscribed and shared

First wire tool video where I actually learned something. Well done, Sir.

Thanks for this video! Awesome explanation of how the tool works for the technically challenged like me😀

I’ve had this kind of tool for over 25 years and although I had some idea of how to use it and mostly used it for simple wire stripping, I wasn’t fully aware of all the functions such as screw cutting. I recently decided to look into it and found a couple of other videos online but your video is by far the clearest and easiest to follow.

Hi mate, thanks for this video, it's very useful and well produced. Best wishes from the UK 👍

Thanks for showing the split demo. Other videos I found are using more expensive crimpers that don’t have the same crimper head. Nobody pointed out where to put the split sections in one of these cheap tools.

Brilliant, new some of that but the screw cutting holes were always a mystery to me.😎

Thanks got some speakers to work on🙏🏽

Good!

beo thanx a lot for that great and clear easy demo but ignition system u didnt mention

A nice video to introduce a lot of beginners to this versatile tool. A couple of points of clarification if I may...I would not recommend crimping coax with this tool. The coax you happened to show used a compression style terminal, which requires a completely different tool to install, as it is not crimped. But even for crimp-style coax terminals, this tool will not generate sufficient crimping force to make a reliable connection. A minor clarification on the screw-cutting portion (the part of this tool most people don't understand!) is that it isn't 6 thirty-seconds or 8 thirty-seconds. Machine screws come in particular sizes (diameter of the shank--very similar to wire gauges, but a totally different system). The 2 numbers with a dash in between represent the screw (shank) size and the thread pitch (number of threads per inch). So a 6-32 screw (common in electrical work) is a #6 screw with 32 threads per inch.

Great video, layman's(simple) way explanation, and cool guy. Never knew or thought of the bolt cutter and its purpose until I watched your video! .... can NOT tell you how many times I've bitched about when cutting a screw/bolt (with a regular cutter, not this tool) messing up the threads at the end. So, this tool re-threads the end of cut so you can use it like a new cut-to-length size. COOL!! Thanks a lot!

WOW IM A CRAFTING HOUSE WIFE AND MY HEAT PRESS STOPPED WORKING SO I WENT THROUGH TONS OF VIDEOS IN ORDER TO PURCHASE THE CORRECT TOOLS AND BUTTONS TO USE THEN I GOT MY STRIPPING KIT AND WENT THOUGH TONS OF VIDEOS ON USING IT AND CAME ACROSS YOUR ARE A GREAT TEACHER AND YOU EXPLAIN THINGS PERFECTLY YOU DONT RUSH I AM I USING A TOTALLY DIFFERENT TOOL AND I HAD NO PROBLEM UNDERSTANDING THANKS

I know English very little, but this is the clearest video I have seen so far on this subject, It has helped me a lot. Thank you very much for doing it.