How to Rebuild a Crankshaft

Рет қаралды 7,430

6 ай бұрын

Rebuilding a crankshaft is an advanced project. It's completely different than balancing. Although this video is relatively short I go through all the steps and concepts needed to do an excellent job rebuilding a crankshaft.

Пікірлер: 38

@jamesdenton3692 6 ай бұрын

Plain language , clear and concise . Most excellent.

@dougnash6316 6 ай бұрын

Great vid. Back in the day we used lead hammers. More mass, less damage. I have rebuilt H2R Kawasaki and Suzuki triples and they were challenging. Singles were a breeze.

@ChuckfromTrueTech 6 ай бұрын

Same here. Built lots of twin & triple sled cranks. The odd 4 cyl. Singles are nice.

@cathy2128 6 ай бұрын

Thank's for your channel and your time. Pure Gold👍👍

@jasonyoung7673 6 ай бұрын

Very informative Chuck. Thank You for your experience & time & making this video 👍👍

@miro_s 6 ай бұрын

Fantastic! What great videos you’re producing…

@Happypillz 6 ай бұрын

Loving your content. I am learning a lot. I have a project bike and I am taking your little tips and tricks.

@therawlifefamily 6 ай бұрын

great video!

@cooptroop5 6 ай бұрын

Kent Moore had a crank rebuild gig that had spacers so you could press to exact crank web widths! 👍 They were special tools for start up Yamaha dealerships in the 80’s

@ChuckfromTrueTech 6 ай бұрын

That would be nice to have. I do all kinds of cranks, so tooling up might be expensive. I often use suspension shims.

@eastkyprog 29 күн бұрын

What’s the best way to clean up galling on the inner crank web surface? When the crank locked up the bearing race dug into the web and roughed the surface up.

@ChuckfromTrueTech 29 күн бұрын

Depends how bad it is. I’ve done it with a die stone many times. I’ve also cut it on the milling machine. If it’s that bad though I usually buy a new crank.

@3dwezzy740 8 күн бұрын

real men build their own cranks😮

@mike9500 3 ай бұрын

nice!

@onthethrottle7104 6 ай бұрын

Wow, what an amazing technician - absolutely spot on. Great show, Chuck! How can you not give a thumbs up...

@ChuckfromTrueTech 6 ай бұрын

🙏

@hopperdropper7137 3 ай бұрын

Hi, great video thanks very much. A few questions... what sort of hand press do you call that? The jig that the crank sits in, can you buy those or did you get it especially made. If so what sort of spec does it need to be? Thanks very much

@ChuckfromTrueTech 3 ай бұрын

All the jigs for crank building are custom made. For pressing them apart I have a bigger one & a smaller one for different sized cranks. The V-block setup I had made by a friend. If you want one I can refer you to him. I bet he has the CAD files still. The press is just a cheap 10 ton.

@hopperdropper7137 3 ай бұрын

Hi... yeah that would be great. I'm in the UK so its probably to far to ship but if he has the CNC files might be able to build them. Thanks very much its for my kart racing engines

@hopperdropper7137 3 ай бұрын

Hi... I've found a press. I've got a few more jig questions. Are your resssed jigs 22mm mild steel plate? The pair of raised jigs look like 25mm?

@eastkyprog Ай бұрын

What kind/size press are you using?

@ChuckfromTrueTech Ай бұрын

Chinese 10 ton. It’s enough for any crank I’ve come across and I can feel what it’s doing.

@leepeffer1304 Ай бұрын

Do you do crank work or is there someone you would recommend sending one to? Thanks.

@ChuckfromTrueTech Ай бұрын

I do but if you have to ship it, it’s usually faster & the same price to get a crank assembly.

@leepeffer1304 Ай бұрын

@@ChuckfromTrueTech not sure this crank assy can be purchased unfortunately.

@jakeb3025 5 ай бұрын

Did you make that set of v blocks? Looking to get a set similar.

@ChuckfromTrueTech 5 ай бұрын

Had them built at a machine shop.

@rwwells3634 6 ай бұрын

I have a older ktm 300 crank with larger plastic inserts on it, would using a special tool like that to press it apart crush these plastic inserts?

@ChuckfromTrueTech 6 ай бұрын

I haven’t come across a crank that is tight enough to crush the stuffers. Building cranks requires attention to detail though, and an understanding of the factors involved.

@rwwells3634 6 ай бұрын

@@ChuckfromTrueTechalright good to know, so i should be good to make up a tool like that and press it apart? of course keeping an eye on things as well

@digitalmatrix01 16 күн бұрын

Can I send you a 2 stroke crank to work on?

@ChuckfromTrueTech 16 күн бұрын

You could but you could probably buy a new one for the same price by the time you factor in shipping.

@syndeko1632 6 ай бұрын

Hello I have a question about the crank pin. Is it okay if the pin is offet to one direction by a small amount, like 0.1mm, or is that unacceptable? When I pressed my crank back together, the pin is slightly offset and is slightly above the crank web on one side, and slightly under on the other side. Is there any way to fix this without taking the whole crank apart again?

@ChuckfromTrueTech 6 ай бұрын

Of course it’s not ideal, but as long as the pin isn’t interfering with the case it should be ok. I would adjust it by putting it back in the disassembly jig, pressing the pin back slightly on the protruding side & then doing the final measurement on the opposite side again.

@syndeko1632 6 ай бұрын

@@ChuckfromTrueTech Ill do that today, thanks