How to Rebuild a Samurai Solid Front Axle (Part 7) Installing Spindle, Wheel Hub & Knuckle Seals

No video

How to Rebuild a Samurai Solid Front Axle (Part 7) Installing Spindle, Wheel Hub & Knuckle Seals

Рет қаралды 166,908

6 жыл бұрын

This is part 7 of a 7 part video series on how to completely rebuild a Suzuki Samurai 4X4 solid front axle. In this video we show how to install the spindle, wheel hub, (Aisin) locking hub, knuckle ball seals and some brake components used on the 1986 to 1995 Suzuki Samurai. These instructions also apply to the 83-85 sj410. If you need parts or tech support, log on to www.lowrangeoff... or call 801.805.6644. We are your one stop shop for Suzuki and Toyota Parts.

Пікірлер: 36

@dustyfowler7045 6 жыл бұрын

Your videos are great. I would love to see a series on rebuilding a samurai transfer case!!! Thanks for the help.

@alfbloodman23 6 жыл бұрын

keep it up guys!! the samurai series are really nice, putting the item list shown on the video description will help too, im planning to upgrade my car and videos like this help me to sort out what parts to buy and were and how to install/replace them,i hope to see more videos like this soon! thank you guys.

@marnusbloemhof3015 23 күн бұрын

😂 glad I’ve ready this comment before putting it all back.

@hementkoemarnaipal4988 6 ай бұрын

Verry goodlooking and great full understanding for this hilux ln 106 hub parts reparing sir ,thank u very much.😂😂😂

@LavikkaPhotography 6 жыл бұрын

Thanks for putting out such a complicated video series.

@primepartsstore7207 5 жыл бұрын

Your videos are really great! Thanks!

@jaimesaavedrap9437 4 жыл бұрын

excellent videos, take into account Wilson's observation

@nitromyke 6 жыл бұрын

You've installed Sidekick front brakes from the 4 door model with vented disc! Nice bolt-on upgrade! Cool videos!

@mrlionlion1231 5 жыл бұрын

Please let me know how to make sure

@mrlionlion1231 5 жыл бұрын

Jeep grand Cherokee 2007 V8 4.7L 2007 the key won't start

@wanderingwilson 5 жыл бұрын

Why didn't you install the brake backing plate. I put everything together watching your video and then realized I didn't put the plates on. Now I'm taking everything apart to put them on. I appreciate your videos but it would be nice if you didn't skip parts.

@mrooitooit 3 жыл бұрын

At which point does the brake backing plate go on?

@spinyray1 Жыл бұрын

There should be sealant between the spindle and brake caliper adapter, too. Maybe it's on the brake caliper adapter in the video and out of view.

@Mrdub-tn4eg 9 ай бұрын

Is it needed to do the knuckle ball seal last ? Can I do that first the install spindle??

@spandon 4 жыл бұрын

Many thanks, so it's that oil (grease) seal that sits behind (inboard) the inner hub bearing that allows grease to spin out over the wheel? I didn't realise you have to take the kingpins out to replace the felt and seal on the knuckle. Some work ahead. ATB.

@MrAnup22 4 жыл бұрын

nice demonstration , Thanks for video

@vickyviral1 6 жыл бұрын

I like your videos that is very informative. Please upload video's of efi engines. How can we rectify problems in efi vehicles. Thank you....!!

@davidneely6760 4 жыл бұрын

Yeah did you forget to put brake cover plate on? Lol it happens. You guys are the best info but sure hate to go back and lick that cat lol

@Dibona01 4 жыл бұрын

Merci pour les bons conseils. Ils vont m' aider.

@hakunaxavier 5 жыл бұрын

You people are awesome

@raghavrahul3659 4 жыл бұрын

After installing free wheel hubs my differential pinion (in free position) rotates can anyone explain why it's rotating still, even I have changed the wheel bearings and king pin bearings

@coltonbrown42 4 жыл бұрын

After I get the spindle and brake adaptor on and tighten the bolts the knuckle will not turn left or right. Any advice?

@raghavrahul3659 4 жыл бұрын

After installation of freewheeling hub what is problem if it front wheel propeller shaft rotates I m facing this issue

@annonymous7440 3 жыл бұрын

So there's no dust shield for the rotors?

@douglas1982b 5 жыл бұрын

Hey guys could tou tell me where i could find the axel hub ? The one with the wheel studds. I found one on ebay and it got sold and i found one more but i dont like the way it looks. Thanks

@camiloidarraga2552 5 жыл бұрын

thanks for the video, please a tutorial of reconstruction of a carburetor AISAN

@gilbertotraverso8536 4 жыл бұрын

Nice video

@gamerlaos9216 5 жыл бұрын

God work mandar!!!

@jeffferguson4632 4 жыл бұрын

Yeah, somehow I noticed the missing backing plate while watching, then I see Jason's comment -- I wonder if they didn't use it on purpose? I guess it really doesn't serve any purpose with the front disks?? Hmmm...

@carlsagan2561 4 жыл бұрын

Helps: kzfaq.info/get/bejne/gL6FqdCXrtbDl2Q.html When I'm attempting to tighten to 57 ft lb. while rotating the hub, the hub becomes impossible to rotate long before I reach 57 ft. lb. More like 30 ft and then it's no longer rotatable by hand. It then says to undo the bolt, then put it at 10 ft lb. So is something wrong with my stuff? Should I just continue to 57 ft. lb while not rotating? Then back it off?