How To Recharge Your Cold Air Intake Filter: Clean and Re-Oil

Рет қаралды 478,657

6 жыл бұрын

Get the most power out of your ride! Recharge your cold air intake filter! This was a highly requested video from my subscribers when I made the video on how to wash your engine bay. I bring to you how to clean your air filter. It is super easy to do and anyone can do it. I hope you enjoy this video!
PLEASE SUBSCRIBE, LIKE, COMMENT, AND SHARE!
THANK YOU!
VISIT MY PAGE FOR MORE VIDEOS!
Follow me on social media:
Facebook - TBD
Instagram - Nate_Rider_S197
Personal Instagram - Na7eTheGreat
Twitter - TBD
Snapchat - TBD
Comment down below any suggestions to videos
My Car Dyno Numbers:
Horse Power - 440
Torque - 425
0-60 - 4.5 sec.
Mods To My Car:
EXHAUST SET-UP:
Pypes off road H-pipe
Borla S-type Stingers axle back
PERFORMANCE:
100 Shot ZEX Wet Nitrous System
4.10 Gears
JLT Series 3 Cold Air Intake
Bama Performance 91 Octane Race Tune
Catless Exhaust with Straight Through Flow
SR Performance Underdrive Pullies
Airaid Poweraide Throttle Body Spacer
SUSPENSION:
SR Performance lowering springs (1.5in)
SR Performance Panhard Bar
SR Performance Strut Tower Brace
EXTERIOR STYLING:
CDC aggressive chin spoiler
Hood clips and pins
Eleanor style honey comb grille
Matte Black Racing Stripes/hash marks
8in radio antenna
MMD Rear window louvers
MMD pre painted Side window louvers
American muscle pre painted side scoops
MMD pre-painted ducktail spoiler
Hoonigan license plate frame
California Legacy license plate
No front License Plate
4.6L V8 sticker decal
Cleaned and Waxed twice a month
WHEELS:
American Muscle gloss black Bullitt rims 17x8
Pirelli Cinterato P7 Performance Tires
Tire stickers from TireStickers.com
MGP caliper covers
Power Stop Z26 Street Warrior brake kit;
xtreme brake pads, drilled and slotted rotors
INTERIOR:
Modern billit retro style 5-speed shift nob
Carbon Fiber dashboard
Iconic Ford Pony running across dashboard
Leather seats
Shaker 500 sound system
LIGHTING:
Raxiom halo smoked fog lights
Raxiom DRL Projector Headlights (Black)
Smoked blinker lights
Raxiom smoked vector tail lights with white diffusers
MODS TO COME!!!
Pypes Shorty Headers
15x10 wheels with mickey Thompson drag radials tires
Airlift Suspension
Thank You!

Пікірлер: 503

@legionnairestentorian1853 3 жыл бұрын

Clean it 4 times a year. Me laughing as I’m doing it the first time in 5 years

@andygomez3014 3 жыл бұрын

First time in 3 years for me 😂

@dr.x4566 2 жыл бұрын

Me too just did mine after 3 years

@robloxunspacecommand1935 2 жыл бұрын

Rip hp

@adanmoreno1120 2 жыл бұрын

@@andygomez3014 bruh same it’s cause my dad didn’t know you had to💀

@WallyV 2 жыл бұрын

oh my GOSH lol 1st time in 5 years he says

@rubenTR309 10 ай бұрын

You did a good job at stretching this video out to 10 minutes 😂

@chriswalsh9366 4 жыл бұрын

Pro tip...buy two filters. I take mine off the truck and install the new one... done. Then I get the other one washed. I use hot water in the sink and a tooth brush for the grooves after spraying it with 50pct purple power and 50 pct water. Rinse it all out and let dry like dishes and pit back in the box with the K and N red oil

@rowendaxton8378 3 жыл бұрын

a tip: watch movies at Flixzone. Been using it for watching a lot of movies recently.

@jaxtonjerry6685 3 жыл бұрын

@Rowen Daxton yea, I've been using Flixzone for since november myself :D

@codydylan6042 3 жыл бұрын

@Rowen Daxton Yea, I've been watching on Flixzone for since november myself =)

@kfelix2934 Жыл бұрын

Same here, Green or purple cleaner. Wash one and have a spare, Swap out. I do filter every 2 oil changes or 6-7k miles

@MrRobzert Ай бұрын

Well, my Intake has 2 filters, so I need to buy 2 more?!

@firedo_g6268 Жыл бұрын

K&N recommends cleaning the cone style at approximately every 100k miles under normal driving conditions. Keep in mind that they make a profit every time you buy a recharge kit, so if anything, they'd be motivated to shorten the interval. They also warn against cleaning it too frequently.

@howabouthetruth2157 Жыл бұрын

Oiled filters are old, ridiculous technology. Note how the serious off-roaders need to install "a diaper" on their oiled air filters by K&N. The best solution, is simply buy the direct fit/replacement DRY filters made by INJEN TECHNOLOGIES. It's a durable, permanent filter, high quality, guaranteed for life. Ya simply blow it from the inside out using compressed air, followed by using a vacuum cleaner or shop vac from the outside, once every 20k to 30k miles, and you're all done. No need to worry with messy oil. Ask yourself: just how dirty does "an oil bath air filter" get during that 100k miles. Your engine isn't getting as much air flow........not to mention the high risk of gumming up a mass air flow sensor due to the need of using oil in a damned air filter. Happens all the time. There's a reason why ALL auto makers and air filter manufacturers got away from "oil bath" air filters decades ago. OIL ATTRACTS DIRT. And once the oil attracts enough dirt, it is now restricting air flow to your engine and performance is down. Think about that.

@PoisonousMelon 4 ай бұрын

@howabouthetruth2157 no filter is permanent. Every filter gets dirty bro

@davidroman4107 6 жыл бұрын

been waiting for one of these for a long time keep up the nice work

@NateRider 6 жыл бұрын

yeah man thats what I am here for!

@P_Tag 2 жыл бұрын

I know what I’m doing this Saturday now lol my filter is nasty 😂 thanks for the video man! 👍🏻

@100thomasmagnum 6 жыл бұрын

Dude, I just love how much you love your Sally. It makes me feel good you care for her so!! Nice how-to video!! Again, keep up GREAT work on the vids.

@NateRider 6 жыл бұрын

thank you so much james I really appreciate it :)

@iamSelfSufficient 5 жыл бұрын

When you were walking towards your car I was looking like “wait I know that place that’s in La Mesa”. Dope to see Daygo represented!

@gerryduggan6821 6 жыл бұрын

Thanks bro really helpful I'm doing mine just now thanks for you pro tips always good to get the know how. By the way your Sally looks amazing what a car keep up the good work👍👊👍👊👍👊👍👊👍👊✌✌✌

@brettsmythe121 4 жыл бұрын

Finally a tutorial that actually helped me out thanks

@Ryan-br3hq 3 жыл бұрын

Thanks for the video bro. Much appreciated

@therevelator7741 4 жыл бұрын

You should NOT spray the oil on both sides, or double coat. The oil should be a light covering on the intake side so the Mass Air Flow sensor does not give false readings. Also the cleaner should be sprayed on the intake side, and washed out from the exhaust side. This gives you the best performance for your K&N filters

@griggidy Жыл бұрын

You could if ur car is turbo'd

@batmanguzman3963 Жыл бұрын

🤣🤣🤣🤣 Too bad I saw this comment after doing both sides earlier today

@jaimecoc8412 Жыл бұрын

Can you explain it in another way? I didn’t understand

@howabouthetruth2157 Жыл бұрын

Dude, get rid of that damned oiled filter by K&N and buy a good direct fit/replacement DRY filter from Injen Technologies. Very high quality, permanent, guaranteed for life. They call it their SuperNano-Web technology. Ya only have to blow it from the inside out with compressed air, followed by using a vacuum cleaner or shop vac to clean it from the outside, and you're all done. Normal use requires cleaning only once every 20k to 30k miles. More often for severe off-road use or dusty/dirty environments of course. NO MORE GUMMING UP YOUR MASS AIR FLOW SENSOR DUE TO USING THAT STUPID OLD TECHNOLOGY "OIL BATH AIR FILTER" TECHNOLOGY USED BY K&N. Besides, OIL ATTRACTS DIRT. Think about that. Notice all the K&N off road users needing to install protective "diapers" on their oiled K&N filters. Ask yourself: Why do ya think ALL of the auto makers & air filter manufacturers got the hell away from "oil bath" air filters decades ago. It's ridiculous.

@Nightneo2000 Жыл бұрын

@@howabouthetruth2157 that actually makes sense. I just oiled mine, and used my stihl leaf blower on it from intake side. But i have never had any issues with k&n on 5 cars now.

@redding4540 4 жыл бұрын

If you wanna do this process overnight, make sure to recheck your filter if it's completely dried. Mine didn't dry completely so I had to use blow dryer to take that liquid evaporated. Also...do not use too much oil like this dude. Lightly coat it twice and don't look back afterwards. or you'll get check engine light.

@Murphys_Law9 2 жыл бұрын

why is oil required

@redding4540 2 жыл бұрын

@@Murphys_Law9 The light oil layer traps incoming contaminants as well as protects from water damage.

@MrMikeSlugger 2 жыл бұрын

Im pretty sure ive over oiled mine. Its not installed at the moment but whats my nxt steps here ?

@GOLD_FEVER 2 жыл бұрын

@@MrMikeSlugger Just re clean it. use some "degreaser" to take off all the oil then repeat the dryiing process and re apply oil

@griggidy Жыл бұрын

You could use that much oil if your car is turbo'd

@ethanadams9135 6 жыл бұрын

That was helpful! I'm adding that to a playlist so I can watch it again when I get a cold-air intake.

@NateRider 6 жыл бұрын

yeah man thats what I am here for! Hope this helped out

@tylerlee56 4 жыл бұрын

I have the same filter in my 2010 gt. Cleans up good.

@adamowens5507 11 ай бұрын

appreciate man ! went 30k miles on mine in mine in my taurus i just always blew it out with the air compressor but it’s looking a little darker . cleaning it now on my way to autozone watching the video

@jackpotjoel7348 4 жыл бұрын

Awesome video helped me alot!

@alfredomadrid601 2 жыл бұрын

Great job! Thanks for the information

@dustynglynn1306 6 жыл бұрын

Love it man!

@NateRider 6 жыл бұрын

Thanks Dustyn!

@lc7192 6 жыл бұрын

Nice job on a nice car. Thanks man.

@tommcdonald53 4 жыл бұрын

nice video, thanks buddy !

@robsreviews9172 9 ай бұрын

Thanks for the video. Really helps a lot

@SOT310 3 жыл бұрын

Thank you so much Very helpful video

@robertschweder7105 5 жыл бұрын

Thanks bro. Appreciate ya

@stephenalexander2427 4 жыл бұрын

Big ups ! I didn’t know how long to let it sit before putting it back on !

@nikkisixx8307 3 жыл бұрын

I love your videos ! This is my first time upgrading my own 2008 mustang and your videos are awesome and very helpful thank you

@mattcurran4664 4 жыл бұрын

Great vid. Thank you

@jkash56 5 жыл бұрын

Good tips. Nice video

@MrTrenttness 3 жыл бұрын

Thanks man!

@foOxjust 2 жыл бұрын

that was helpful thank you

@cameronmatson435 9 ай бұрын

Great video! When I take mine off, I do put a zip lock bag over the intake (, where the filter was). Also, I never leave mine outside, I'd recommend keeping it indoors in a clean area and use the dryer if needed.

@chrissmith3906 5 жыл бұрын

Great video

@stoneskinner4576 5 жыл бұрын

You’re telling me you got a goatee and a stache between 2:56 and 3:15?😂😂😂 thanks for the vid though lol

@MacB369 4 жыл бұрын

Stone Skinner It’s that 5 o’clock shadow 😂

@jeremiahstewart3054 3 жыл бұрын

Wow I love that mustang setup

@mjba852 3 жыл бұрын

Thanks brother I just cleaned my truck air filter same way you did

@natking1u1z99 3 жыл бұрын

ProTip: that's actually his hairdryer 😏 Great vid kid, thanks!!

@zac.bolin01 Жыл бұрын

I cleaned mine after 1/2 through an oil change cycle and it was absolutely caked beyond recognition in dirt… took over an hour and a half to get it all clean….

@angelomartinez3381 3 жыл бұрын

Oh shit that's my city. Subbed

@josebec8977 6 жыл бұрын

How did you do to grow your mustache so fast? 😂😂🍺 good video my man.

@atex3308 6 жыл бұрын

You truly are the best KZfaqr for mustangs, keep up the good work.

@NateRider 6 жыл бұрын

thank you it means so much to me

@juliancontreras6507 6 жыл бұрын

Agreed

@txpatriot7044 3 жыл бұрын

1) Remove Air Filter 2) Spray with Air cleaner degreaser thoroughly 3) Rinse 4) let dry 4.5) oil Filter 5) Install 6) Drive car goes Vroom Vroom

@mule666 2 жыл бұрын

You forgot the oil

@travelingman217 2 жыл бұрын

Forgot oil like one guy said. I know he will be squeeling at every stop. Like the other guy mentioned. Haha

@TraceguyRune 2 жыл бұрын

You forgot to oil. No vroom vroom. Just boom bang kaklunk.

@txpatriot7044 2 жыл бұрын

@@TraceguyRune updated

@arcticstar1 5 жыл бұрын

I. Thank. You. For. Thee. Vid-e-o. (Just trying to match your "young Christopher Walken" talking rhythm lol- seriously: thanks!

@lukemei5ter Ай бұрын

Dude dropped his sack in the middle of this video 😂❤ great video

@jamesnelson9966 3 жыл бұрын

Hey can u do a video on the tire lettering. I've done tried it several times can't get them to stay on the tires to long.

@WARFARE_YT 2 жыл бұрын

I have a roush intake in my mustang good too know you can use the k and n dude my air intake was red before now it's dusty definitely need to clean it asap

@michelangelo8956 4 жыл бұрын

After my first time cleaning my filter, I realized all the waiting for drying and oiling sucked. So, I purchased a second filter; one to clean at my leisure one to swap out. 😎

@eddie39216 3 жыл бұрын

Lazy as hell really didn’t take me more then 45 min, whole job

@michelangelo8956 3 жыл бұрын

Good for you

@TraceguyRune 2 жыл бұрын

Aren't these filters about $100+?

@gely_ Жыл бұрын

@@TraceguyRune K&N has filters for like $30-45 not the entire kit but just the air filter. So its affordable forsure but not really necessary since u can clean it with the kit for $13

@TSPhotoAtlanta 11 ай бұрын

In the really old days, “oil bath air intake” actually used baffles to direct intake air at/thru a pool of oil. The oil absorbed the dirt from the intake air and voila. Sort of a good system at low speeds and with the oil at the right amount, changed frequently. The (typically) cone filters with oil sprayed on have a lot of surface area due to the many folds. Resistance to flow if all else is the same is measured by surface area. Oiling the surface increases cleaning effectiveness but does add resistance to flow. If the filter is cleaned as needed (prescriptively) and oiled lightly but thoroughly it will work very well. The extra surface area compensates for the resistance to flow of the light oiling. Any type of filter used will need maintenance to remain effective. It’s a choice….

@arcorob 6 жыл бұрын

Nate...question. you have two screws showing on the shroud for your cold air intake. I have that to and wonder if its for the same reason. .On the other side is where I mounted my Mishimoto Oil catch can...you ?

@NateRider 6 жыл бұрын

the two screws on my CAI side that connects to the throttle body?

@Ken-hh3zf 4 жыл бұрын

interesting, just ordered a K&N cold air intake, think I'll get an extra filter where I'll always be good to go.

@doanyytorres3861 4 жыл бұрын

nice bro

@dhmcc9882 6 жыл бұрын

Pro tip! Don't run degreased water on your nice driveway.

@uhplumber5962 5 жыл бұрын

Lives at his parent's house so doesn't give a crap!

@XTheDevilYouKnowX 4 жыл бұрын

This kid isn't moving out of his parents basement anytime soon...

@psulse 4 жыл бұрын

Ultra pro tip....toss in the clothes dryer...30 min later done

@carlosherrera8541 3 жыл бұрын

I was saying the same thing. I bet its a real nice house. Water fountain in middle of driveway🔥🔥😎😎 cool house. I wouldn't leave either lol

@kevinpaulus7312 3 жыл бұрын

psulse won’t the high heat damage it, i have a very large filter for my 2012 f250 6.7

@AntifIaw 5 жыл бұрын

Great finger workout

@melraine919 3 жыл бұрын

Nice one! I hope they do it in green because that is the colour of mine and smaller. UK

@sixfootdworf9545 2 жыл бұрын

Warm Soapy wooder. This is the cheap way that works just as good. Take a spray bottle with warm water and dawn. Spray the filter down outside, let it sit for a while spraying every few minutes. After about half an hour, start washing out from the inside of the filter out. Dawn is a very gentle degreaser that's nontoxic too, so personally I like my method. Just repeat this process 2-4 times until you stop getting gunk in the water, and then air dry overnight, or, like he said, air dryer. After it is dry, go and reapply intake filter oil. Thin layer of oil on the outside of the filter, do it twice.

@barrystein5740 Жыл бұрын

This is what i may do. Dawn is a gentle de-greaser. Environmentalist use on oil soaked water fowl and it works great for that purpose. I also use Dawn to clean my factory alloy wheels...works like a champ...little agitation needed. But I wonder...instead of spraying the filter with Dawn...how about a 50/50 mixture Dawn to water in a bucket and soak the filter for a few minutes then rinse it. I'm thinking it should have the same results......thoughts.

@FunkyBruja 5 жыл бұрын

Thank you for the vid.

@barrystein5740 Жыл бұрын

When installing this filter, does the MAP sensor need to be be re-programmed? What about the exhaust system...does anything need to be change there?

@brentmarquez9057 3 жыл бұрын

I can't get the damn filter out. Mine does not pop right out - I loosened the screw for the metallic ring and it won't budge. I guess I need to just really forcefully yank it off? Is there anything else I need to loosen?

@Suhhdew 3 жыл бұрын

That la Mesa autozone 👌🏼

@TheFratHouse69 2 жыл бұрын

Does the filter disintegrated in these filters. Mine looks like it’s just metal. I can my tell if there should be a layer of filter material in there.

@fulllifestyle4022 4 жыл бұрын

I got a new Short ram intake and it says k&n recommended before use and didn’t come with any instructions but I’m assuming I just oil it right , no need to clean it considering it’s brand new

@marksr8784 2 жыл бұрын

Just bought Black Betty this past weekend and it's filter was filthy Thanks for the video....who's Black Betty??? 95 Dodge Ram 5.9 😁

@aiden20yearsago51 5 жыл бұрын

Haha I named my mustang sally too. Looks good

@gordo1230 3 жыл бұрын

I recently bought air cleaner cover with k&n with it...it was used...I'm in the middle of cleaning it now...its drying now...wut is the difference 2 theses filter compared 2 the regular ones??

@dtrainm14 4 жыл бұрын

Does this also work for the spectre Cone filters?

@carlosmorris4510 2 жыл бұрын

I'm assuming this product can be used for a Weapon-R reusable CAI filter (I have one pre-installed in my vehicle)? It looks very similar... I'm not sure if it's an oiled or dry filter though. 🤔

@kiroshi6414 5 жыл бұрын

This was great, I’m leaving now to go buy that kit.

@shield707 3 жыл бұрын

I have to agree... She was looking good all the way around 🤷😎

@code3ron 4 жыл бұрын

Ok my question is..... I saw a guy that hates these kinds of filters showing because they are open how much dirt and grime can get in the engine. Thoughts on this?

@ivanvallejo1011 3 жыл бұрын

Are all the cleaner kits the same? Because I have an afe cold air intake

@DehTastic 5 жыл бұрын

K&N also makes Universal Clam On Air Filters. For more air flow using a Dry Flow Air Filter May give you a tiny bit of boost which K&N also sells in a universal application. With dry flow you get more air flow but more cleaning as well.

@TraceguyRune 2 жыл бұрын

K&N has shit customer service. I'd avoid them. I sent them an email, and got a response back in 33 days. I followed up to their email, and it has now been 8 months, and no response yet.

@DehTastic 2 жыл бұрын

@@TraceguyRune oh yah I can believe that. My experience with them before they relocated their customer service to Texas was pretty good. Ever since they moved it hasn’t been the same.

@wavyybased1820 6 жыл бұрын

Nate! How Hard was it to get the rubber hose on the plastic JLT CAI? hahaha dude It took me like 45 mins to get that thing on. I was surprised how great the car ran after this install. Keep up the great work man.

@NateRider 6 жыл бұрын

it didn't take me too long lol its a tight fit, just how i like it ;) I know thats one of the best installs on a car

@jjamaya01 4 жыл бұрын

Bought my 08 g35 a few months ago and was wondering if these filters were reusable haha they were already grey 🤣

@michaelprice1228 5 жыл бұрын

He just like saying cold air intake.

@mrkyleescobar 3 жыл бұрын

Ya its a filter not the actual cold air intake. This guy is funny. And shops at auto part stores. Lol

@crowleyscollectibles 3 жыл бұрын

01:40 He says filter often enough. But as person who grew up playing need for speed and way too much drag racer V3, it’s much more satisfying to say cold air intake, haha.

@JorgeSanchez-ev6ku 2 жыл бұрын

Lmao😂

@cediepurificacion8480 3 жыл бұрын

So it doesn’t matter what kind of cold air intake you have you can just clean it instead of getting a new one? I have aem intake

@hauntedhose 4 жыл бұрын

Scary looking guy 😳

@eLChnOMnDz 6 жыл бұрын

Hey naterider what intake should i put to my Mustang 08 v6 please answer thnx

@Coyote_boa Жыл бұрын

How much do you think you've spent on the performance modifications?

@doyleholloway1818 5 жыл бұрын

what is the small purple box with the two white wires going to it""

@wisheduknew294 2 жыл бұрын

Nate I have a question, so my mother has one of these under the hood on her 2003 four Thunderbird engine! And the filter and the area around it is filthy with soot!!! What can I do why is it doing that?

@kenneth9271 Жыл бұрын

I do it like 1 maybe twice a year. But I don’t clean it for fun like this guy I notice that shit be dirty. ( always construction in my area )

@MadPandaKicks 6 жыл бұрын

Grew a mustache in 10 secs

@NateRider 6 жыл бұрын

hahaha finally someone noticed

@aiden20yearsago51 5 жыл бұрын

Lol I was so confused

@BH-ul3pn 4 жыл бұрын

He says Code air intake..

@bivensrk 3 жыл бұрын

@@NateRider I like that you showed that sometimes it takes more than one pass at the thing to get it clean. I realize this is 4 years old. Are you still driving a car that uses one of these reusable filter? If so, have you considered getting a spare filter? I did that and it frees me up to clean the filter when I have time.

@CollinLevaR 2 жыл бұрын

great video! never knew i needed this untill my tuner shows my air intake temps are getting to 140 degrees Fahrenheit and my fuel trims are kinda wacky

@TraceguyRune 2 жыл бұрын

While driving in 20F-degrees weather, my car's instrument screen shows 75F-air-intake

@justinnnnnn4945 Жыл бұрын

I have a 2012 c250 Mercedes coupe with a bms cold air intake will this be okay to use ?

@josemelendez8058 3 жыл бұрын

How about buying a second filter and keep it on standby!

@TraceguyRune 2 жыл бұрын

Does AutoZone sell K&N filters? I bought one used from someone and it doesn't connect together correctly with the base.

@3232myke 4 жыл бұрын

Is it cold air even tho ur takin the air from inside the engine bay?

@Hollibird64 4 жыл бұрын

Do you have video on how? to install cold air intake

@MrBlazzin101 Жыл бұрын

So I just got a cold air intake, I have no experience with this. Should I buy a new filter or clean It? Hoe many tines can I clean it before I have to replace it if at all

@luisvera3060 3 жыл бұрын

Can I use an air compressor to dry it out easier

@PEnZKE99 3 жыл бұрын

mine is black so its dirty.. whats the temperature of the water you used??

@405streetscene9 4 жыл бұрын

great video! everytime i clean my air filter i come to this video!!!!

@williamdelapena1121 5 жыл бұрын

lol park far away. thats me😂

@grimm3593 3 жыл бұрын

William De La Pena facts

@Baysick5197 6 жыл бұрын

I know this is a car oriented vid but... If that's where you live, dude nice house

@NateRider 6 жыл бұрын

I live in many places lol if you see my channel you can tell haha

@superiergaming5463 4 ай бұрын

Hey man what do I use to remove the bracket losen the bracket ????

@davidsilva5929 5 жыл бұрын

Isn't that just a short ram intake? The cold" air intake goes more down ?

@aniskoopman5793 4 жыл бұрын

Its got the heat shield so looks like a cold air intake to me

@paulfoo2675 3 жыл бұрын

0:46 "One thing about the car you're building... park far from anyone avoid getting exterior damages" Supercars owners in my country: Hmm, I'm gonna park in the middle of this T junction.

@fahadassiry224 4 жыл бұрын

can i use jlt intake and spectre filter?

@marcheguitars 3 жыл бұрын

How do you pass smog with an aftermarket intake

@silverbulletS197 6 жыл бұрын

Do you know where I can order that same exact filter for the JLT intakes? Mine is all jacked and i need a new one ASAP. thanks bro

@NateRider 6 жыл бұрын

yeah check out americanmuscle.com they have it all

@silverbulletS197 6 жыл бұрын

Lol that never crossed my mind and I'm always on there... thanks!!

@sanderpena Жыл бұрын

I would stay away from those rubber ends air filters, my injen intake came with one of those rubbers ends. when I took it off to clean on the end was wide open lol like not filtering air at all. I bought an spectre filter with metal end from now on no more rubber filter ends for me, wondering how long was the filter like that, hope not that long.