How to Relic a guitar the right way

Рет қаралды 131,229

Күн бұрын

Tip a Tea and support me: ko-fi.com/devilandsons Achieve a natural relic finish on your guitar or bass.
Daniel from Devil & Sons walks you through the step by step stages:
0:00 Intro - The best way to relic your guitar
3:00 Tools and equipment (see below for Amazon links)
8:13 Prep and pre-paint work
10:10 Using keys to make dents
11:51 Using nail punches to make dents
13:23 Using a dremel/multi-tool to make dents
14:49 Using a plasterboard knife to make scratches and dents
17:23 Using a dremel/multi-tool to soften the edges of dents and scratches
19:01 Using a scalpel
20:16 Using wet and dry paper to smooth the dents
22:08 Ashtray marks
24:14 Experimenting with the dremel/multi-tool
25:38 Sanding the edges
28:35 Cleaning the guitar
29:20 Checking (the cracks on the paint work)
32:01 Mixing the dye
32:30 Applying the dye
32:25 The finished guitar
Links for the tools and equipment I use (please let me know if any link is broken)
Wet and Dry paper (Klingspor, my favourite brand) amzn.to/33fcCeW
Sanding block: amzn.to/3fjvQm1
Nail punch set: amzn.to/33bM4uW
Scalpel: amzn.to/2BMIbkV
Plasterboard knife/saw: amzn.to/3ggBx5D
Dremel (a decent starter model): amzn.to/2XgA0ot
Alternative multi-tool (this is the same as mine but branded differently): amzn.to/2DjZ478
Multi-tool extension shaft: amzn.to/3k0pQST
Multi-tool bit set: amzn.to/2DhSHRD
Air Duster Spray: amzn.to/3gh4ONB
Heat gun: amzn.to/30hj96W
Please like and subscribe, hit that bell, and if you want you can:
Contact me:
info@DevilAndSons.Guitars
Order a guitar or customisation:
www.DevilAndSons.Guitars
Buy some merch:
www.redbubble.com/people/DevilAndSons
Follow on socials:
DevilAndSons
DevilAndSons
DevilAndSons
/ devilandsons
#relicguitar #checking #guitarslikenoother

Пікірлер: 518

@dirtyboy3544 3 жыл бұрын

I've been relicing my body for years the natural way, unfortunately it's my actual body and I've achieved top results

@DevilAndSons 3 жыл бұрын

Is it wrong that your comment made me laugh?

@MaldoMusicTV 3 жыл бұрын

😂😂😂🏆

@JarvisGems 2 жыл бұрын

😂

@arkham_miami 2 жыл бұрын

Yikes

@gfj06 2 жыл бұрын

You should be a comedian, this is genuinely a good joke.

@johnathanschaaf8731 2 жыл бұрын

I'm definitely in the camp of not artificially relicing a guitar - but I totally respect people doing what they want with their own guitars. That said, I very much appreciate the skill and artistry it takes to relic a guitar correctly, and find it fascinating to watch. Thanks for sharing your work. Great stuff.

@DevilAndSons 2 жыл бұрын

Thank you for leaving such a nice comment, I'm also surprised by how angry some people get over this issue.

@jbhk7977 Жыл бұрын

I never saw the added value of relicking, I think that a guitar should develop character over the years.

@DevilAndSons Жыл бұрын

For so many people that just doesn't happen naturally.

@58Paradise Жыл бұрын

same

@Sixxiron 2 жыл бұрын

Absolutely great video! I fall into the “love” reliced guitars, and this body turned out great. Thanks for sharing this knowledge!

@DevilAndSons 2 жыл бұрын

It's an absolute pleasure, thanks for commenting. I also love a good relic.

@danpreston8898 3 жыл бұрын

This is by far the best tutorial vid for relicing on youtube. This looks amazing!

@DevilAndSons 3 жыл бұрын

Thank you so much for such a nice comment. Are you about to relic a guitar yourself?

@danpreston8898 3 жыл бұрын

@@DevilAndSons I originally planned to but then chickened out. After watching this video it's given me a bit of confidence! I've got a blonde strat with a mint pickguard and I know it's look good with some aging

@DevilAndSons 3 жыл бұрын

Cool. Good luck. If you're on social media and put any pictures up please do mention @devilandsons in the comments, I'm always keen to see what other people are making.

@neebranch8555 2 жыл бұрын

Wow, that’s dedication replying to every comment for 1 year! Great tutorial and keep up the good work :)

@DevilAndSons 2 жыл бұрын

Ha, thanks. There aren't that many comments and honest the interaction with people makes it all worth while - so thank you for commenting.

@paulmoore9785 3 жыл бұрын

The end result looks great. Nice job

@DevilAndSons 3 жыл бұрын

Thanks so much. I was very happy with this one, basing the relic on photos of other guitars really makes a difference.

@AndyBankside 3 жыл бұрын

Excellent video. Best one I’ve seen. Cheers!

@DevilAndSons 3 жыл бұрын

Cheers, thanks for taking the time to comment- it's ones like that that make it worth while.

@C2Lawson 17 күн бұрын

Beautiful work!

@DevilAndSons 16 күн бұрын

Thanks so much

@martinthompson2425 6 ай бұрын

Very nicely done! I’ve reliced a few of my builds in the last eight years and I’ve learned something new on each build, reliced or not. The stain at the near end of the process was the icing on the cake for sure and my most valuable take away from this vid! Thanks for sharing!

@DevilAndSons 6 ай бұрын

Thanks for watching. I hope the stain process works for you, I think it really does help give the checking cracks the look of them being old. Have you got a plan for your next guitar yet?

@martinthompson2425 6 ай бұрын

@@DevilAndSons. There are always a few ideas bubbling up. Been pretty busy though lately. I have a Wilkinson Tele kit (alder body/rosewood fretboard) from Stewmac that I’ve been sitting on for almost a year without having approached the assembly yet. I’m not even sure if I’ll use both pickups in the kit or do an Esquire type of thing. Maybe even hide a neck pickup under the pickguard. Or maybe be even more slick and sneak a neck AND middle pickup under the pickguard! Olympic White? Vintage/Antique White? White Blonde? Frost White? Lake Placid Blue? Sherwood Green? Shoreline Gold? To relic or not to relic??? Decisions, decisions…

@DevilAndSons 6 ай бұрын

@martinthompson2425 cool, I love a hidden pickup. I have a video coming out later this week with a different looking relic process in it that perhaps may offer some inspiration.

@nashdrifter3629 26 күн бұрын

I noticed most people that say they can't stand a Relic guitar actually just like the way they sound saying they don't like a relic guitar.

@DevilAndSons 26 күн бұрын

😄 probably very true

@kyledriscollmusic Жыл бұрын

damn this is like the best relic tutorial out there

@DevilAndSons Жыл бұрын

Hey, thanks so much, I really appreciate that.

@tattoodan4277 3 жыл бұрын

Thanks for the video I’ve learned a lot from it .... also I have to say I absolutely love your hand tattoos! I’ve never seen anything quite like it before

@DevilAndSons 3 жыл бұрын

Thanks Dan, and what a great user name. The guy that did them is @tomastomas108 on instagram, you should check him out.

@cctn2012 3 жыл бұрын

That is a lot more realistic than most for sure thanks

@DevilAndSons 3 жыл бұрын

Thanks so much for commenting. I do hope it is, by basing it on photos of a true relic I can make sure it seems more realistic.

@andrewedmonds5431 3 жыл бұрын

Brilliant video - thanks! Just bought a super-cheap Squier 'project' tele and think it might be my first relic job. This will definitely be my go-to video...

@DevilAndSons 3 жыл бұрын

Thanks so much, that's great to hear. Good luck with your project and if you put any photos up on social media do tag me, I love to see people's builds.

@andrewdeck7945 Жыл бұрын

Wow. killer work!

@DevilAndSons Жыл бұрын

Cheers. Thanks for taking the time to comment

@YauFamily2010 3 жыл бұрын

Great to see how it’s done.

@DevilAndSons 3 жыл бұрын

Thanks so much for leaving a comment Wilson.

@bareknuckles2u 3 жыл бұрын

Great job!

@DevilAndSons 3 жыл бұрын

Thanks so much.

@DragonofLimerick 3 жыл бұрын

If you enjoy it then go for the relic. I love the bleeding edge new look! This was definitely cool though, great work!

@DevilAndSons 3 жыл бұрын

Thanks, and I think that is the best attitude- like what you like and don't hate others if they like what you hate.

@Mute67 2 ай бұрын

Love it!

@DevilAndSons 2 ай бұрын

Thanks so much

@jepa2527 Жыл бұрын

I bought a factory reliced guitar and loving it.. I have been using it and displayed in our living room. I have the cort sunset tc worn butter 😊

@DevilAndSons Жыл бұрын

Nice. It's great to have something to display and play.

@MiniShowProductions Жыл бұрын

Great job man

@DevilAndSons Жыл бұрын

Thanks so much. I was particularly happy with how this one turned out.

@BRZguy 3 жыл бұрын

Wow that's some incredible work! The wood stain at the end really helps solidify the aged appearance. I never would have thought to use the stain on the laquer cracks though. That's a really smart idea that I bet a lot of people don't do. I'd love to try this one day on a beater guitar but I have no idea how to even add a professional looking nitro finish.

@DevilAndSons 3 жыл бұрын

Thanks so much. Yes, I think that stain really makes a difference. I actually have a series of videos about spraying a guitar but have yet to do a nitro one. The advantage of doing a relic finish is you could probably get away with some problems in the finish as it may add to the look - so perhaps worth giving it a go without the pressure of trying to get something perfect.

@BRZguy 3 жыл бұрын

@@DevilAndSons Yes that's true. Plus, it looks really fun to sort of make up a story in your head about the guitar. Like how you gouged out the finish near the bridge like someone was trying to fit a screwdriver there, or with the pickup cover plate making a ring around the pickup. Maybe one day I'll find a cheap used squier or something to try it on.

@DevilAndSons 3 жыл бұрын

You're right, the story behind it is can be really cool. Good luck when you do try.

@wessmusic 2 жыл бұрын

That looks great! If only Squier someday just released a nitro-finished guitar... I'd love to relic my Classic Vibe but I don't feel like stripping it or adding a nitro layer to it. I've seen other people suggest it but I'd love to see a video on how to relic a complete poly guitar. Either way, lovely job. Very inspiring to watch!

@DevilAndSons 2 жыл бұрын

Thanks so much. To be honest my suggestion for poly would be to put a nitro finish on it. The other method is to hand score a nitro style checking into the finish with a scalpel or exacto blade. If ever I do one I will certainly film it.

@itsamemikeg 3 жыл бұрын

Great job.

@DevilAndSons 3 жыл бұрын

Thanks so much.

@ttestates1 2 жыл бұрын

I'm relicing a 59 Les Paul burst, 63 Fiesta red strat and 62 L5 Archtop at the moment. I love doing it!

@DevilAndSons 2 жыл бұрын

Excellent. It's a surprisingly fun activity once you get into and always tempting to get a bit extreme and do too much. I hope they go well.

@ttestates1 2 жыл бұрын

@@DevilAndSons Thanks, so far SUPER HAPPY!

@DevilAndSons 2 жыл бұрын

Great stuff. If you have any photos on social media please do tag me, it's always great to see what people are up to.

@ttestates1 2 жыл бұрын

@@DevilAndSons I absolutely will The 59 is almost done, the 63 state just need wiring and headstock, and working on the L5 tailpiece, it broke at the 90 degree, so I making it a hinged tailpiece!

@DevilAndSons 2 жыл бұрын

Cool, thanks. I look forward to seeing them.

@jklement87 9 ай бұрын

Good vidya, very informative. Thanks

@DevilAndSons 8 ай бұрын

Thanks so much.

@GamerPastHisPrime 2 жыл бұрын

That turned out really great. I like nice a shiny guitar usually, but I have a custom shop Jag and Jazzmaster that have a very light relic to them… and now I kind of feel like I want one that goes a little further.

@DevilAndSons 2 жыл бұрын

Thanks. Do you think you may take yours a bit further yourself?

@GamerPastHisPrime 2 жыл бұрын

@@DevilAndSons I am considering saving for a few years and getting a masterbuilt custom Stratocaster… just an idea I’m playing with. If I decide not to do that I would definitely consider it, but I would maybe practice on something pretty inexpensive first lol. I really like the aged hardware on the relic’d guitars.

@DevilAndSons 2 жыл бұрын

Yeah, the hardware definitely adds to it. Picking up a cheap ebay guitar and experimenting can be fun, but saving up for something special is a great idea.

@andrew.jpeg_ 2 жыл бұрын

Amazing video! This was really really helpful, I’ve been working on a strat for a while and couldn’t find the right look for it. I might steal some techniques from you though!

@DevilAndSons 2 жыл бұрын

Thanks. This video is here for people to steal techniques from. I hope it goes well.

@zummo61 Жыл бұрын

Funny thing is I have several guitars that are 50 plus years old, and none of them are this beat up. They have dings and checking, but the finish is still shiny and mostly intact. My 90’s strat has more natural wear than my 60’s tele.

@OOOMMM 2 жыл бұрын

Great video

@DevilAndSons 2 жыл бұрын

Thanks so much for taking the time to comment.

@guillermocamet6446 8 ай бұрын

Gran trabajo, excelente !!

@DevilAndSons 8 ай бұрын

Cheers!

@stubenmoebel 5 ай бұрын

i did find it usefull, thanks a lot

@DevilAndSons 5 ай бұрын

It's a pleasure, thanks for commenting

@gfj06 2 жыл бұрын

I used to hate the idea, but after get annoyed with my shiny guitars, I grew very fond of my mom's old Taylor, Wich she found in someones garbage. It plays great and I love the aged feel.

@DevilAndSons 2 жыл бұрын

That sounds like a great story for the guitar. Thanks fir sharing

@aisle_of_view 2 жыл бұрын

Nice idea. If I did it myself though, I'd probably inspect it every time I took it out and wonder what I could have done differently or better.

@DevilAndSons 2 жыл бұрын

Unfortunately that is what I also do, but I'm doesn't have to mean I'm unhappy with it- just that I want to do more.

@letterli 2 жыл бұрын

Wow!! GREAT!! Thanks!!

@DevilAndSons 2 жыл бұрын

Thanks so much. I hope it useful.

@BrianLeverett 3 жыл бұрын

You are a pro!

@DevilAndSons 3 жыл бұрын

Thanks so much, that's very kind.

@bobbyackron9125 3 жыл бұрын

Nice job, I learned alot.

@DevilAndSons 3 жыл бұрын

Cool, thanks for letting me know.

@DevilAndSons 3 жыл бұрын

Isn't it two words not one?

@DevilAndSons 3 жыл бұрын

Plus I don't really mind, it's great people are learning something.

@fuzzypoet1018 15 күн бұрын

Just caught this video now (that's what I love about the web). There's one more reason why people strip finishes off their guitars: Thick poly finishes due to cost constraints and profit margins. That thick poly finish makes the guitar look like it was dipped in plastic and kills the tone. That's why I sanded the poly off my Epi Casino (2008 Gibson Qingdao-made). The guitar is louder when strumming acoustically, and it can hang in the same ballpark as my guitarist's 335 with the Duncan 64 Antiquities I put in. No regrets about the modifications whatsoever.

@DevilAndSons 15 күн бұрын

Very cool, thanks for sharing.

@BeauHannamGuitars Жыл бұрын

Nice one mate

@DevilAndSons Жыл бұрын

Cheers!

@Tihsllubllasti 3 ай бұрын

This video is amazing. I've only just started watching how to do it, but this definitely the first out of the few I've seen that i want to model my first try after. Very good tutorial. Thank you so much for all the attention to detail and the quality instruction. I look forward to watching more of your videos.

@DevilAndSons 3 ай бұрын

Thank you for such a kind comment. I hope all goes well with your project. I do have some other relic videos that might give you some alternate ideas or approaches.

@Tihsllubllasti 3 ай бұрын

@DevilAndSons thanks for the reply. Have you ever attempted working on an acoustic or know anything about doing that? My nicest guitar came with a pretty thin finish on the top (Adirondack spruce). It has some pick scratches above the sound hole, as well as some other dings and knicks, so I was thinking of refinishing it to enhance the looks, but I don't wanna mess up the way it sounds because it has a really nice tone that I haven't heard from any other guitar. If you have any advice or suggestions on who to watch or how I should proceed, I would very much appreciate it.

@DevilAndSons 3 ай бұрын

@SeeYouNextWednesday I have worked on a few. I would say that I am not an expert on this. I would assume that applying more coats of paint or lacquer would effect the sound on an acoustic, especially if your doing a paint job that involves a lot of paint. However I did finish one with a hand painted acrylic design, then varnished (so relatively thick) and couldn't notice the difference. If you're trying to hide dents it can be quite hard to donit so the finish looks perfect if the dents are big. I just refinished one, for small dents you couldn't see them, bit I the larger area it was noticeable that the lacquer was thicker, although the top was smooth the dent was a good 1mm deep and roughly a circle of 4cm diameter.

@DevilAndSons 3 ай бұрын

@SeeYouNextWednesday someone else may have a good video of fixing an acoustic. For the last problem I mentioned I think you'd normally lay in a thin laminate to fill the gap before finishing.

@Tihsllubllasti 3 ай бұрын

@DevilAndSons I don't want to hide the dents. I want to do what you did to this electric. I want to strip the gloss and give it more of a satin finish, after making it look even more used and worn than it already does. But in a very tasteful way, like you did in this video.

@steevothaman 3 жыл бұрын

Been looking for a video like this. Great job! Would you recommend the same brown and orange dye mixture to fill in the checking on a lighter slightly yellowed blonde finish?

@DevilAndSons 3 жыл бұрын

I'm glad you found it. I like the dark colour, and when you wipe it away it can be quite light in areas as it is watery. To me it's what I think the dirt and grime would be like. If you have a bit of the guitar that is to be covered up (like under the scratchplate) you could always experiment there.

@bristolfashion4421 3 ай бұрын

with a lot of what this is mostly about we will find many of the other types which we didn’t necessarily think might have happened in the first or second or more rarely after we went to much greater lengths for example when we do the other stuff that none of us initially thought about - that’s when we came to know a lot of the sort of thing that naturally came out of the extraordinary extra stuff…

@DevilAndSons 3 ай бұрын

Doing other stuff is often a way to open up creativity

@TexasTinyHomesRock 3 жыл бұрын

Nice work!! Do you have some pictures of the complete, finished job? I'd like to see them.

@TexasTinyHomesRock 3 жыл бұрын

Never mind, I am seeing them on your Facebook page..nice job!!

@DevilAndSons 3 жыл бұрын

Cheers. I probably should have put some in the video.

@jimmyx4599 24 күн бұрын

I have a red relicked.cruiser stratocaster made by crafter. I bought it on cash converters it looks really good and sounds great. It is the only relicked guitar in my possesion.

@DevilAndSons 24 күн бұрын

I was about to say will it be your last, then I saw the next post!

@platklump 4 күн бұрын

Amazing work! I wanted the look of a reliced guitar once but I guess what I really wanted was for my guitar to show any wear at all with use (nearly impossible with poly). Guitarists are weird. This is great though because it's an art in and of itself!

@DevilAndSons 3 күн бұрын

Exactly - modern guitar finishes are so durable that it's hard to get that finish naturally. Thanks for your comment, much appreciated.

@Kevsadone 3 жыл бұрын

That was on point, man. Great job. Very useful info and your tele looks super. I am just starting the process on my tele and will use this video as my main guide. Theoretically, the whole idea of aging a guitar is inauthentic. However, why not. For many of us, we will never own a classic Fender from the early days, and the look is awesome.

@DevilAndSons 3 жыл бұрын

I totally agree, why not? I get a bit frustrated with people that get actually angry about it. Anyway, thanks for leaving the comment and good luck. If you are on social media and end up posting any images do tag me in the comments ( @devilandsons ) as I love seeing other people's work. Good luck.

@Kevsadone 3 жыл бұрын

@@DevilAndSons will do brother. I just got a very expensive delivery of legit shell pink nitro, so now I'm ready, to lay down some paint.

@DevilAndSons 3 жыл бұрын

Exciting. I like that colour on teles, very cool.

@Kevsadone 3 жыл бұрын

Now that winter is finally over up here, I can paint nitro outside. Can't wait to share my work with you.

@DevilAndSons 3 жыл бұрын

Excellent. We had a few sunny days last week and I ended up doing some spraying too, it's so much fun to see things transform. Good luck.

@russelw.6288 2 жыл бұрын

Great! you got a video on relicing a maple - laquer tele fretboard?

@DevilAndSons 2 жыл бұрын

I haven't, but I am aiming to do more relic videos soon. You could use the same techniques on the back of the neck. But I would recommend a clear coat over the top to smooth it out a bit.

@saltyscorpion2151 3 жыл бұрын

It is always nice to watch a professional work. You've done a thorough job as always. I would never do it to any of my guitars. I spend a lot of time trying to keep my guitars from looking reliced.

@DevilAndSons 3 жыл бұрын

Ha, thank so much - I agree, I remember the first time I got a dent on one of my guitars how upset I was. Maybe these days I mind less though.

@JHself 3 жыл бұрын

Je bois 3 bières et je fais pareil... d'ou faut être un pro pour saccager une guitare ?

@DevilAndSons 3 жыл бұрын

@@JHself Si vous suivez mes instructions, vous n'êtes pas obligé d'être un pro, vous pouvez même être ivre!

@hushpuppykl 3 күн бұрын

My old Les Paul Studio has naturally aged and there tons of micro cracks on the edges. The white finish now has a slight pinkish hue to it. 😂🤣 What’s difficult to do it to get the hardware to age like the real thing. Naturally aged hardware has a nice dull, dirt like layer of oxidisation to it. You done a very nice job 👍👍

@DevilAndSons 3 күн бұрын

Thanks so much. I'm actually in the process of filming a relic hardware video, trying to achieve that natural dull look. It's tricky.

@hushpuppykl 3 күн бұрын

@@DevilAndSons … all the best! I’m sure sooner or later you gonna make it look ever so real. 😈

@DevilAndSons 3 күн бұрын

@@hushpuppykl thank you

@marianorevale2296 3 жыл бұрын

The best video about relicing I've ever seen. Thank you so much. I only have a question, some guitars have this "slightly shiny" look on the bare wood after wear, which seems to look softer to the touch that the bare (young) natural wood. Do you think it might be helpful to use some kind of oil (tung oil for example?) or could it be that thin coat of final lacquer you mencioned in the video so that "everything remains the same" in the finish over the time? Thanks again for sharing your experience.

@DevilAndSons 3 жыл бұрын

That's the best comment on a video about relicing I've ever seen. Thanks so much. Yes, I think some oil or lacquer is what is needed for that effect.

@philippschraudt3755 7 ай бұрын

God... i do love your Handtattoo. ❤ also good job.

@DevilAndSons 7 ай бұрын

Thanks so much. The tattoo is bt Tomastomas108 on Instagram, go check him out.

@ThePereiraleandro 3 жыл бұрын

good job

@DevilAndSons 3 жыл бұрын

Hey, thanks!

@BigBobbyBoLo 20 күн бұрын

I use to hte reliced guitars but Ive grown to like some of them... outside of the astetic, the comfortable lived in aspect, does appeal to me

@DevilAndSons 16 күн бұрын

That's cool that you mind has changed over time. Thanks for watching and commenting

@godsinbox 2 жыл бұрын

. New Comment Layer The dremel is a great idea, i will use that to improve the relic finish on my affinity tele Cheers!

@DevilAndSons 2 жыл бұрын

No worries. Best of luck and do let me know if it helps.

@GUEDESBROGIDRUMSchannel 2 жыл бұрын

I got here 'cause I bought a cheap used stratocaster EXCLUSIVELY to relic it (and if I like it, change the pickups to good ones), but I love reliced guitars, or actually old guitars. I'll come back here after I finish relicing my guitar to tell how it turned out

@DevilAndSons 2 жыл бұрын

Hey, welcome. Please do let me know how you get on, and if you need any more tips. Good luck

@jokermaan1 Жыл бұрын

As a retired graphic designer and handy with woodworking, I think I'd be quite good at relicing and actually enjoy the challenge. I hate it though, so I'd never do it! I've owned a blackguard Tele from new in 1982 and it's now lightly reliced with some checking in the nitro finish. All natural though!

@DevilAndSons Жыл бұрын

I wonder how I'd charge my clients if I went that route, an hourly rate may be excessive?

@jeffallen3382 2 жыл бұрын

Love relic guitars!

@DevilAndSons 2 жыл бұрын

Me too.

@DevilAndSons 2 жыл бұрын

What do you like about them? I just live the way it adds personality to a guitar, like giving it a life history.

@jeffallen3382 2 жыл бұрын

@@DevilAndSons I have 3 factory relic Strat type guitars. First, is you don't have to worry about getting scratches or dings in them. I also have a $5k custom signature ESP guitar that I cringe everytime I get a scratch on it. With my relics I don't care. Second, it just adds character to them. It's like art in a way. What I don't get is why some people get so angry with those who Iike relic guitars? It's not their property. Why should they care what I do with MY guitars? I find it funny when they get so worked up over it. They may like blue or green guitars... I don't care! Why do they feel they should be caring what I like? It'd ridiculous. This Tele turned out nice! Good job.

@DevilAndSons 2 жыл бұрын

I agree, I bet those people who hate relics will happily wear stone wash ripped jeans or buy "antique" furniture. Great point about nit being worried, I would be scared to play a $5k guitar! And thanks, I'm really happy with that guitar too.

@jeffallen3382 2 жыл бұрын

@@DevilAndSons Jon. Probably do wear those! Thanks a lot!

@Gaslight.Guitar 3 жыл бұрын

Looks good imo! Enjoyed your video :) what else to do on a rainy Saturday.. ;) peace!

@DevilAndSons 3 жыл бұрын

Thanks for letting me know. Sadly I spend way too much time on youtube, not just those rainy days - so much good stuff.

@Gaslight.Guitar 3 жыл бұрын

@@DevilAndSons me too but I wanted to mention the rainy day here in germany lol

@DevilAndSons 3 жыл бұрын

Well I'm glad i could help distract from the rain

@richyp7126 2 жыл бұрын

Wow did you relic the ferrule holes so far out of allignment? superb work.

@DevilAndSons 2 жыл бұрын

Are they? I really only painted and reliced this one so that's how they came into my workshop.

@dannywoody5497 8 ай бұрын

Thank you so much I was interested in the wood die section I like this telecaster builder nacho. He gets a great look on the body, so I’m interested in that look.

@DevilAndSons 8 ай бұрын

My pleasure. Happy to help if you need any advice.

@tysonrinker5958 6 ай бұрын

Yeah nacho work looks great

@DevilAndSons 6 ай бұрын

@tysonrinker5958 thank you

@wittycream5522 Жыл бұрын

Great video man! When the wood is exposed, with what do you make it darker to achieve the old and sweaty look?

@DevilAndSons Жыл бұрын

I use wood dye. Sometimes I also use acrylic paint watered down. Just get it a bit uneven and use a few slightly different shades or colours.

@DevilAndSons Жыл бұрын

Thanks so much, glad you like it

@johntchb 2 жыл бұрын

Hi Daniel hope all's good 4u.l am awaiting delivery of a cheap Tele bridge,hard tail from China with 6 brass barrel saddles.its going on a squire strat that the wrap around didn't sit well on.routing and sinking was a bridge to far 😂 , now l just need to decide which way to go with the pick up,lt has 3 single coils from strat days .think I will chop scratch plate back further keeping neck and middle positions,give it a try before switching to a Tele bridge pick up.cheers for the advice you gave me.

@DevilAndSons 2 жыл бұрын

No worries, always happy to help. That sounds like it will be pretty cool. If you're on social medias please do share a photo with me.

@Killstrike66602 4 ай бұрын

Probably can’t do this to well with polyester finished can you but is there a way you can age a poly finish to not look so new to match an older neck that is on a newer body?

@DevilAndSons 4 ай бұрын

You can do all these stages with a poly finish except the final checking/cracking finish. That can be done using a scapel to fake it, or you can spray a layer if clear nitro on top, leave it a month, then do the checking.

@Black-Cat-Pixels Жыл бұрын

Realy nice done!! I start with a Fender American Performer Telecaster HS and send you my pictures.

@DevilAndSons Жыл бұрын

Please do, and thanks so much for watching and commenting.

@russelw.6288 2 жыл бұрын

Can i use compressed air from my big air compressor? ( you know that machine i can pump tires or Air gun laquer stuff) Or does it need to be that compressed can-stuff

@DevilAndSons 2 жыл бұрын

I think the can. Basically it's the cold from the can not the air that does the relic.

@jklement87 9 ай бұрын

The picture shows the chrome being aged but this is only the wooden body, is there a hardware aging video. Cheers

@DevilAndSons 8 ай бұрын

I absolutely need to make one. I'm ageing some hardware soon so I'm going to film that process.

@j_freed Жыл бұрын

Great look, top marks - my old Bill Nash Blackguard looks like a rush job by comparison when you examine up close but to me it’s really all about the comfort of the neck(with the sanded-away lacquer!) The aesthetics of the light relic butterscotch body finish could be tweaked in various ways you have shown, yes but I may just play the thing.

@DevilAndSons Жыл бұрын

Whichever way you go I hope you have a great time with it.

@j_freed Жыл бұрын

@@DevilAndSons - 👍 Bill makes some nice playing guitars! That’s mainly his focus.

@DevilAndSons Жыл бұрын

I really should check them out.

@JoelPerez-le2jc Жыл бұрын

By far the best relic tutorial! If I may ask, what is the bit you use on the Dremel?

@DevilAndSons Жыл бұрын

Thanks so much, I really appreciate that.

@DevilAndSons Жыл бұрын

I often use a grinding bit, I bought a cheapish set of them on amazon and they come in different sizes and shapes. Sometimes I use engraving bits too.

@joshuataft5541 Жыл бұрын

Great job I'd love tou to do one for me someday

@DevilAndSons Жыл бұрын

Thanks so much, I'd love too. Have you got a particular guitar in mind... for the future of course.

@livelongandprosper70 5 ай бұрын

Ive had my DREMEL 8200 for about 8 years, use it every week if not more, never failed me. All I've ever had to do was by an extra battery ..🤷

@DevilAndSons 5 ай бұрын

I must work mine too hard. I've got through 3 of them. One of them had a couple of brush changes too.

@zanzur1 Жыл бұрын

Should i grain fill before applying nitro lacquer if im gonna relic it?

@DevilAndSons Жыл бұрын

That's a very timely post, I've just been making some test strips of filler and primer to compare for a future video. Here's what I'm thinking... if you want to reveal wood during the relic process and then add stain to it after you have painted the body and reliced it then don't use clear primer or saler as that will effect the ability to add stain. If you want the painted wood to be smooth but with the Relic cracks and areas in then do use filler (the filler won't effect the staining of the wood). If you want your paint to look older and really worn in then don't use filler. I would recommend that for a really heavy relic. Another option would be to use filler but don't be too perfect so you deliberately miss a few areas,, this will mean you'll have some smooth finish and some not so smooth which I think would look really cool.

@zinantij 2 жыл бұрын

Awesome video! Is the nicotine staining just an amber-colored clear? It looks awesome! How'd you do it?

@DevilAndSons 2 жыл бұрын

Thanks. Yes, it is a translucent spray, actually called nicotine. I put an old scratchplate and bridge on then lightly spray the area from a bit of an angle, then when you take them off you get the light discolouration around the areas that I imagine would get dirty on a real aged guitar. I hope that helps. The nitro I used on this (I think) was all from northwest guitars in the UK.

@CadenCovers 7 ай бұрын

at 20:30 was that wet sand paper? what removes the sand paper markes?

@DevilAndSons 7 ай бұрын

Yes.i normally start with 800, maybe 600, then go over the marks with finer, normally by 1000/1200 you can't see any marks.

@rogercaruthers2584 2 жыл бұрын

I’m not a fan of it in general. BUT that being said, I liked the looks of the cracks and the stain added a good touch! Good job!

@DevilAndSons 2 жыл бұрын

Thanks for commenting. Relics are very devisive, personally a love a world of people with different tastes.

@leroyjenkins3895 7 ай бұрын

YOu did a great job, but if I had to critique Id say you should have done one thing that almost everybody doing a heavy relic doesn't do.... You need to "damage" the exposed wood as well. No guitar that had that much aging would have all those dents and scratches etc, and absolutely nothing in the exposed areas. the back where all the buckle rash is should have different tones in it and scratches in the wood. the wood is softer than the paint on most guitars and once the paint was gone it would get more damage than when it actually had paint. Also there should be dents etc, on the bottom and even on the head stock.

@DevilAndSons 7 ай бұрын

Very good points, thanks for adding to the conversation here. I wonder if people like the relic effect to reveal the pristine wood? I've started dirty ingredients up the wood that is exposed but good point to add the dents etc there too.

@eco-eta 3 жыл бұрын

I’ve got a Sunburst Fender Strat and I’m not sure if I should relic it or let time take it course. I really want it to relic over time but part of me knows it would look better if it had that classic SRV/Clapton look to it. Suggestions?

@DevilAndSons 3 жыл бұрын

I honestly don't think guitars relic over the time in the way people imagine unless you are a full time musician, where the sweat and beer ands something to the process. You have to play a lot to get wear everywhere and those dents on cool relics surely come from constant moving and travelling- I look after my instruments at home to well to get that many scratches in them. When I used to gig regularly I got the odd knock but I never gigged enough to get a true relic look, more a slightly bashed look. It's hard choice though but I would say if you really want a certain look and aren't bothered about it being 'faked and don't mind doing it on your own guitar then you may as well. Not that helpful an answer perhaps. Let me know what you decide though.

@latenightthinker4737 3 жыл бұрын

@@DevilAndSons honestly wish I could travel with my guitar enough to wear it in naturally, but sometimes is just really odd cause you'll have on dent here but the rest of the guitar looks brand new. Not to mention, it's not like a skateboard that looks years old within a few sessions, it's an instrument I want to take care of. If I just threw it everywhere then I'd ruin the electronics and tuning keys.

@DevilAndSons 3 жыл бұрын

Exactly. You want a road worn look but just don't want to abuse your guitar - I wish some people could grasp that but there are always anti-relic people who say you should do it naturally, I assume they are the kind of person that doesn't look after their guitar as much.

@skankhunt2437 Жыл бұрын

hey jonathan I dont know iif ur gonna see this but I want to relic a white fender player strat with alder body, Is it possible to relic an alder body? Kinda wanna get the white strat from John Frusicante. If its possible please let me know so I can buy it and can get to work. Thank you and nice video!! :)

@DevilAndSons Жыл бұрын

Hey, thanks for commenting. This relic process is essentially mainly on the finish of the body, so wood doesn't make a difference. If you reveal parts of the wood and want to stain it then the alder shouldn't make a difference. Sometimes there is a clear sealer coat between the wood and the colour coats, that's the only thing that would stop the stain working, you'd gave to sand through that. You wouldn't be able to get the cracked look using the heat process if the paint isn't nitro, in which case I would suggest adding a top coat of clear nitro to the guitar so you can crack that.

@nicholaswalker7198 9 ай бұрын

Giving a new guitar an old relic look , I think is the same as writing a new song that sounds old. There is craft involved in both disciplines. But mostly it’s about telling stories, fans of course, wearing costumes to make the stories believable.

@DevilAndSons 9 ай бұрын

What a great analogy. Thanks for sharing that.

@ianmarbibi5779 Жыл бұрын

Have you also done some relicing on polyurethane painted guitars? I think it is more challenging and would not give the best effect. Mostly all my guitars are Japanese made, which were known to have the extremely thick paints, if you know what I mean. Please advise, thanks!

@DevilAndSons Жыл бұрын

I have, and recently I filmed myself doing one and will make a video in the new year. Essentially it's just the same but perhaps you'll need to go a bit deeper to get some of the marks you want. You can't do the checking cracks though unless you mark them by hand with a knife or put a coat of nitro on top and let it settle in for a few weeks then do the heat thing on it.

@lyndonart552 Жыл бұрын

My guitar is Sonic Blue. what color stain should I use at the end?

@DevilAndSons Жыл бұрын

Personally I think a brown would look good. If you are using paints or stains you already have and your guitar has a part that is hidden (like under a scratchplate) you could experiment. I dark grey or black might look good too.

@peterm3964 3 жыл бұрын

Hi you are a champ , by the way what is the tongue stud actually used for and do the hand tats get you laid ? thank you

@DevilAndSons 3 жыл бұрын

Cheers mate! The tongue stud acts a bit like a plectrum when I'm playing like Hendrix and the tattoos are actually drawn on in biro each time I make a video.

@CoryBrunnemann 8 ай бұрын

Do you have a video of you doing the PAINTING of this guitar?

@DevilAndSons 8 ай бұрын

I don't. However I have one coming out next month where I painted a guitar with the same process buy using transparent red instead of the butterscotch.

@DevilAndSons 8 ай бұрын

Happy to answer any questions though about the process.

@CoryBrunnemann 8 ай бұрын

@@DevilAndSons oh yeah I guess it doesn’t specifically need to be this guitar, just researching on doing a nitro finish and then aging it. Did you do clear, then relic, and then it sounds like you’re saying you did another clear on top of it all?

@DevilAndSons 8 ай бұрын

So actually I also have some new nitro videos I'm working on, and it depends on the finish you want. For a relic this I often don't grain fill or use a primer so some of the wood texture shows through, but really you should do them first. Then colour, then clear, then relic. If you're exposing the bare wood you may want to relic then clear coat, then do the checking. In this video I mentioned clear on top of the checking to seal it in, but I don't actually think that's needed. I've also started using products by Nitorlack, a company that make nitro specific designed to relic. That's what my new videos will be on.

@mattydread8148 3 жыл бұрын

I have wanted to do a relic guitar for a long time. I’ve been trying to learn luthierie lately and have bought all the set up tools and I’m considering building a guitar from a kit. Do you have any recommendations as far as who makes the best pre made kits?

@DevilAndSons 3 жыл бұрын

Very exciting. In the past I have bought a few kit guitars from ebay and have noticed that they seem to be the same despite the branding, so i assume they are from the same factory and then sent out to suppliers who put their brand on them. They've all been pretty OK and to learn on probably quite good - you may have to do some work to the frets etc which is good for learning. I've not bought a kit from Crimson guitars but they look to be of a high standard so would be worth checking out. Good luck, and if you do build something and share on instagram or Facebook please do tag me in the comments- I love to see what people build.

@jerrymorganjr 3 жыл бұрын

Try the stewmac kits. They're like $500, but come with high quality vintage spec components.

@DevilAndSons 3 жыл бұрын

Good to know they have high quality components. Thanks for commenting.

@elsremon785 3 жыл бұрын

Does it work with a poly body ?Great(best) relic video ! ;-)

@DevilAndSons 3 жыл бұрын

Thank you so much, I'm glad you like it. Poly won't respond in the same way with the hot and cold air. Some people score the checking lines on to a poly finish using a scalpel or exacto knife. The other elements should all work the same.

@icantplayguitarandnowyouca3198 2 жыл бұрын

Would a hair dryer get it hot enough for the checking?

@DevilAndSons 2 жыл бұрын

Honestly it's worth checking, I think some would manage it if you work an area long enough but they definitely don't get as hot (otherwise you'll burn your head).

@theconsortion2037 2 жыл бұрын

Hey man, great tutorial and fantastic result!! I have a question: do you think coffee would work to fill the nitro cracks instead of woodstain? It's kind off the same color... I tried the stain but it turned out way too dark

@DevilAndSons 2 жыл бұрын

Honestly I think you could use anything. Coffee may be less stable than a stain long term and may end up getting cleaned away if you clean the guitar a lot, but it's definitely a cooler choice with a better story to tell. You could always use the coffee then seal it in with a top coat of clear nitro if you really didn't want it change long term. Also, depending on the stain you can normally dilute them with water or a spirit.

@DevilAndSons 2 жыл бұрын

...and thanks for the comment. Glad you like the result.

@theconsortion2037 2 жыл бұрын

@@DevilAndSons Thanks for the reply man! Coffee it is!

@DevilAndSons 2 жыл бұрын

Ha. Let me know how you get on.

@TreeShark 2 жыл бұрын

Can I relic a stock squire strat body with whatever paint they use to paint it? Idk if paint matters… lol

@DevilAndSons 2 жыл бұрын

100% you can for everything except the checking/cracks - that method with hot and cold only works on nitro. Sobyou'd have to leave that part out or coat the guitar with some clear nitro and let it settle first.

@jasonistheworst 3 жыл бұрын

Any tips on highlighting finish checking on a black guitar? I’ve got a good checking pattern going on but not sure if adding white paint is the correct way to go with it. I’m hoping you’ve tried something similar before. Thanks!

@DevilAndSons 3 жыл бұрын

I haven't actually done that. I wonder if a brown stain would still make the checks visible but subtle. White wouldn't be natural but I bet it would look really cool. What guitar is it? I would definitely do a white test on a bit that is out if site (like under the scratchplate) if you can.

@jasonistheworst 3 жыл бұрын

@@DevilAndSons it’s a black 2020 Gibson Les Paul Junior I just picked up. I got the body pretty well checked, and I did pull the pick guard and did the checking under there as well so that will be a good place to test color options. Thanks I didn’t think about color testing somewhere, start dark and go lighter until I get it right. I’ll post back results!

@DevilAndSons 3 жыл бұрын

Excellent, please do tag me in some photos, I'm keen to see how that comes out. Good luck.

@simmix7134 27 күн бұрын

me b4 watching the video : why would some one deliberately make their guitar look used and worn out.. me by the end of the video: ok this is actually really cool

@DevilAndSons 27 күн бұрын

Thank you, that is such a nice thing to say. I appreciate you taking the time.

@MrGlobalcheese 5 ай бұрын

Would be great to see a colour over burst heavy relic guitar or bass done like Vincent Van Trigt Master builder from FCS. His look brilliant. and filthy dirty, and very dark dirty nitro on necks and ver faded look on bodies. Do any or these guys use air brushes for detail work? and boot polishes rubbed into very worn areas?

@DevilAndSons 5 ай бұрын

That's something I really want to try. I am making some plans for a series of different paint jobs and that's one I have in mind for sure. I do love the colour over burst look. There are a few different products for guitars that do the boot polish job, i prefer using acrylic paint though, or wood stain. I haven't seen anyone use an airbrush for detailed relic, but it seems like a sensible additional to the options for creating a relic finish. Thanks for taking the time to comment.

@robertorochamartinsrocha7041 Жыл бұрын

cool 🤘🤘👍👍✌✌👍👍

@DevilAndSons Жыл бұрын

Thank you

@ryangunwitch-black 2 ай бұрын

Dude, your tattoos are very cool 😎

@DevilAndSons 2 ай бұрын

Thanks so much. It's by tomastomas108 on Instagram

@comment_below Жыл бұрын

hey do you know if sanding down the gloss and paint will expose your body to toxic chemicals? I want to sand a strat but Im worried my arm, for example, will be resting on something toxic

@DevilAndSons Жыл бұрын

As far as I know because it is dry and just flakes it would be something you can potentially breathe in but I don't think it can pass through the skin on you arm as it could when spraying it initially. I'm sorry not to know definitively.

@Williams-Guitars 6 ай бұрын

I'm really curious about the nicotine spray aging that was briefly mentioned around 9:05, but I can't seem to find a video on your channel about that. Could you point me in that direction or provide some more details on how to do that?

@DevilAndSons 6 ай бұрын

It was a nitro spray from a company called northwest guitars. The colour was called nicotine, and it's translucent. I was able to put it on quite thinly in areas that I thought would look a bit more dirty, and layer it up to make some parts darker than others. I actually mainly use an Amber spray to do that now. A company called nitorlack make a vintage Amber that goes on really lightly to allow for darken by adding more layers. I hope that helps. Do let me know of I can elaborate any more.

@Williams-Guitars 6 ай бұрын

@@DevilAndSons Ahhh okay awesome. Thanks!

@DevilAndSons 6 ай бұрын

@@Williams-Guitars no worries. Are you working on something fun?

@Williams-Guitars 5 ай бұрын

@@DevilAndSons I'm working on an aged tele build. I've got a fiesta red undercoat and a french blue top coat. I'm using Nitorlack fast relic nitro as the clear finish, and then an amber tint for some UV simulation. I'm hoping the fast relic nitro will allow me to work through the blue finish in a more natural way than just sanding

@DevilAndSons 5 ай бұрын

That sounds very cool. I have a video about that relic actually. I don't think it will help you work through any better, in face it will make it harder as you'll now have a layer of clear on it. Thee relic is good for making the cracks and checking appear not the wear. I hope that makes sense.

@gscgold 3 ай бұрын

I only like a relic guitar if it looks good if it's done correctly. The best relics I've seen come from the Fender master built collection those things look amazing

@DevilAndSons 3 ай бұрын

I've not seen one in person, but i have seen some other Fender production relics that don't look so good in person, the surface was just really smooth as the top clear coat covered everything evenly.

@gscgold 3 ай бұрын

@@DevilAndSons Probably depends on the master builder as well

@DevilAndSons 3 ай бұрын

@gscgold absolutely. I forget the name of one of them who I follow on Instagram but his relic work is outstanding

@bigpapi2658 3 жыл бұрын

The amber spray process would have been nice.

@DevilAndSons 3 жыл бұрын

Yeah, I may make a video of that next time, I didn't think to make a video until after that.

@micajones1483 3 жыл бұрын

I think it's a personal choice. A matter of taste. I believe they look very cool, but only if done correctly. If not done right, there is no uglier guitar. So, do it right or leave it be!

@DevilAndSons 3 жыл бұрын

I agree, matter of taste for sure and I also aren't a big fan of the ones that are done badly.

@jimmyx4599 24 күн бұрын

Could you relic a Harley Benton TE20 telecaster in black some time. The guitar is not high in cost £77 pound new and £10 delivery cost £87 all together.

@DevilAndSons 24 күн бұрын

I actually think even the budget Harley Bentons are pretty good after a proper set up. Where are you based? I'm in the UK so if you're not the shipping and tax costs would probably make it not worth it.

@michaellarsen8622 Жыл бұрын

This is an awesome video. I have a few questions - 1) how did you match the slightly darker blonde color to simulate paint aging? 2) did you put clear coat over the darker paint before distressing it? 3) did you say you used "nicotine spray" to simulate use and dirt around the scratch plate?

@DevilAndSons Жыл бұрын

Thanks so much. The darker blonde colour was straight from the can. It was all nitro and I didn't put a top clear coat on (I don't remember 100% to be honest,but sometimes I do at the very last stage to protect everything in it's fake aged look). The nicotine spray is actually a nitro translucent color called nicotine, it's a sort of Amber brown colour.

@michaellarsen8622 Жыл бұрын

@@DevilAndSons Hi!! Thank you for your response! What I meant about the color question was, how did you go about choosing a compatible darker color? Did you use a color number and knew it would be "just a slightly darker shade of blonde?" Or did you compare the original color with other colors in a shop? Thanks again! Love your work.

@DevilAndSons Жыл бұрын

Ah. That makes sense. I basically bought a few different colours from the supplier, all the translucent colours they had (I forget now all the names, but vintage Amber and nicotine were two of them) and then the for the main colour it was the one that closest matched the image my client gave me. They were all from Northwest Guitars in the UK. Thanks for watching!