When this video came out Alynn was 11... And now she is 17 and she is awesome. Good job on raising an amazing daughter. - Sincerely, Alynn's moderator.

Thank you! I spent a while trying and failing to replace a broken door (the new one i bought from beko had no instruction with it), and also a not useful official tutorial showing the wrong type of door.your video was something and i then managed it in seconds! Thanks for taking the time to make this

Thank you so much for this video - all the others out there as you said did not show how to get this particular drawer front off and although our beko fridge is newer the technique starting at the bottom helped us to replace our drawer front as it had been broken.

This video changed my life, I love it so much. Great work MumDoesStuff

I don't usually comment on KZfaq but your video was such a big help for me and others im sure. I had no idea how an earth one was meant to take off these dirt traps on the draws but your video was so informative that I had them all off within minutes and no breakages. Thank you so so much.

Thank you. Slow and steady and off the fronts all popped. Could not have done it without your instructions 👍👏❤️

Thank you for both the removal and replacement videos. Worked a treat, and made a huge difference.

Thanks for encouraging me to deal with this, and particularly to be patient. The critical stage was to unclip the circular 'lugs' on the sides of the drawers. Your video concentrated on the base whereas the sides were more difficult. I used a mixture of a blunt dinner knife and small screw driver. Some rather dramatic snapping sounds in between but four beautifully clean drawer fronts and no broken bits. I am sure doing it in room temperature as opposed to straight from the cold freezer helps. . Thank you.

5yrs later, you’re a diamond and thank you so much. It was absolutely doing my head in. They should have quick release clips

Taking the front off to clean inside would NEVER be on the radar in this household. However, I only broke the old one in 3 places trying get it off (because I broke it a few months ago). So I don't recommend taking it o0ff to clean but thanks for your video Tracey it really helped I had absolutely no idea how to get it off.

God bless you 🙂... I was getting so annoyed of not finding a way to do it...and no info in their website or anywhere!!.. THANKS A LOT 👍

Genuis ! My drawers were slightly different but came off fairly easily with your technique…….and clipped back on even easier.

Thanks for taking the time to do this. Typical crap company when they don't even include this sort of info in the manual! :-)

Excellent, 10 times more informative than the big companies.

Thank you, this really helped. I have taken my drawers apart, cleaned and put back together without breaking!

Great stuff ! Companies should give this info as standard. Well done you

Thanks .. you sorted out the problem to remove the front over ..I spent 10 minutes puzzling over that...it popped!

I was surprised you went from the bottom. When I've been looking at the one I was trying to take apart a few minutes ago I thought for sure the bits sticking out on each side would prevent it popping off. I'll give it another go now I see how easily it comes off!

Thank you so much for this!!!!!! I brought a second hand freezer and it was immaculate apart from those little food remains in the crevices! Because of your video I was able to fully clean and take apart the drawer! Very informative😜😄

Brilliant! Gotta love the Internet! Along with Chagfordrob (my Aga servicing hero!)... you make life better 👍Thanks Tracey

Just tried this with a drawer I was about to throw out due to mold, worked a treat. Used two small screwdrivers and went slowly before I knew it door was off and cleaned and put back into use looking like new, brilliant!

Superb...massive help changing my broken Beko freezer front! Great sense of humour too! ❤

Thanks, worked a treat. Now lets watch the video to get it back on

Brilliant. One of these came with our caravan. Knew there had to be a way of taking the front off to clean but would never have got there without breaking something without this.

I never normally never leave comments but oh my god this video was a life saver!!!! Thank you thank you thank you thank you thank you!!! you're the best Tracey!

Thanks, you stopped us from smashing the draws to bits.

Worked for me, no damage - thank you! I would add one thing I've seen elsewhere though: let the whole drawer warm up before getting to work on it. The plastic should be less brittle when it's reached room temp.

Still proving very helpful. Thanks Tracey.

Thank you so much this was so helpful! I just broke one of mine😅but luckily I came across your video🙏🏻

Thank you so much for recording this! We had such a struggle working it out and you’ve helped us massively! :D We now have a shining clean freezer again!

Well done Tracy!

Thank you Tracey! I could give you a hug now!❤

Thank you, MumDoesStuff

Wow, this was so useful! I also broke a small piece off before resorting to Google and here is the guidance I needed!

You saved me from the mould in the fridge, thank you 💜

Thanks so much for this video! Total life saver!

Hi Tracey, great video. Really useful. However, I found that the sides would still not pop off. When I looked on the inside, there are four tabs that hold the sides in place. Each one had a thin piece and a thicker one holding it in place. I found that if you carefully cut the thin piece then the tab hinges, allowing you to apply pressure carefully on the outside which lets the side pop out. You have to be VERY careful, both with the cutting and with the subsequent 'popping'. I also found that the tabs sometimes stuck to the sides and required a gentle push to release them. Hope this helps.

Push sides first my love and then use even a flat peg. Takes 15 seconds. Thanks for video

Hi Tracey I know this is an old video, I would like to say thank you and add that on replacement I shaved the side one way clips down with a scalpal so they work both ways after you release the bottom clips. I must learn how to make videos and upload them to KZfaq

Brilliant, did the job a treat

I found by using 2 flat screw drivers worked better for me on some Turkish brand called Lamona, but draws very similar to Beko ones you did video of.

Legend! Didn’t even break mine 😉

Worked a treat. Thanks very much 👍👍

Thanks Tracey it's a great help

Thank you are a life saver

Wonderful. Now, can you show me how to get the fast freeze drawer back in without breaking off the nibs? ;)

Great clear vid and really helpful Thanks

Thanks this was so helpful

ALYNN DOES RAIDING

Thank you ☼

Thank you 😊 you're a star 😊

Thanks, helped me out !

Thanks - worked a treat

Thank you👍👍

Thank you :)

Thanks a lot.

Thank you!

Drawer front pin of the freezer bit at the top got broken so needed to swap with the identical drawer front (which doesn't need the hinge pin). Ideal for getting the drawer front off in one piece so I could then swap it with the broken bit.

you. are. a. star.

Excellent

Thank u sooooo much

Thanks. Sorted.

Aylnn does raiding

AlynnsMomRemovesABekoFreezerDrawFront

MarrIsLate

Sorry, but: I couldn't remove the bezel like you showed The bezel is now broken - but I wanted to change it anyway. But I still just want to clean the other aperture.