I create an extreme example of a broken screw and then use a broken screw extractor to remove the screw.
Пікірлер: 512
@stevereade48583 жыл бұрын
I bought mine several years ago ... about the time they did this video. Never used it until today. Working on my shed, there were several Phillipshead screws that were painted-over and embedded into the wood. The extractorS worked fine BUT (1) start at a slow speed when extracting, and (2) if the "correct" bit doesn't work, go to the next larger, and so on. That got me through a couple of very pesky screws. One "strike-out" ... a screw that wouldn't (wooden-t?) release was actually turning in the wood, so I just pryed the board loose; the screw wasn't holding-on to anything. Thanks for the great info and demo!
@R.in.Nashville2 жыл бұрын
Thanks for posting this with details, showing the side 1 & 2. I got a Dewalt kit, no instructions, nothing online... Appreciate ppl like you! 👍
@kevinb20148 жыл бұрын
Excellent video. Thank you. (One suggestion: I think a half-minute musical video montage intro is a excessive for a 3-minute "how to" video. But thanks for such a professional, informative video, nonetheless.)
@fredmancini38466 жыл бұрын
I had bought this very set and there were no instructions on how to use it. This video was the answer. Clear , concise and it worked.
@BattleGn0me2 жыл бұрын
1 minute of content condensed into a 3 and a half minute video. Brevity is wit!
@EramisMaus Жыл бұрын
Somebody who actually gets to the point, thanks!!!
@caio598711 ай бұрын
What? A 3 and a half minute video where the information you need is all the way in minute 2:50
@JamieDalgetty3 жыл бұрын
Could not get over how easy this was to do. Thanks!
@bitflux23 жыл бұрын
this stripped screwdriver issue, is the stuff of nightmares, oh the frustration, the pain, the hoplessness lol
@wetcoco2 жыл бұрын
Thanks very helpful!!!!!!!!! I purchased Speedout 5 years ago. At the time I had no use for the tool, but thought it would be something worth adding to my tool collection. Wala, 5 years later I have 2 stripped screws that must come out to replace door hinges. Works like magic. I was drilling in the wrong direction, but followed your direction and was done in 2 minutes. Thanks again!
@everythinglife23345 жыл бұрын
This is very informative for someone like me who has never used this before since the depiction on the the inside of bit case wasn't accurate, I could NOT differentiate the two bits and which side of the bit they meant, do truly thank you.
@jc13576 жыл бұрын
Thank you. My set came with no instructions, so this was a huge help.
@TheVictoriaBoland3 жыл бұрын
Thank you! Short and sweet and to the point. Great explanation!
@diegoghia12016 жыл бұрын
You need this in your life ! I got a kit like this a year ago and use it for the first time the other day.. i messed up the screw heads bad... took seconds with this !
@sactomoto91083 жыл бұрын
I have the smoothing out part nailed down, that's why I'm here HAHAHA
@Joe_S.3 жыл бұрын
Ha! Don’t we all ......
@anthoniomcguapo90973 жыл бұрын
Lmfao same here😅
@blooddktank32163 жыл бұрын
Same man
@jamesmartin44582 жыл бұрын
😂😂
@massholemitch66992 жыл бұрын
Best comment! Hahaha
@jeanineedwards63192 жыл бұрын
Great video. After watching, bought a screw extractor kit and it worked perfectly for me on a stripped bed frame screw
@Puremindgames2 жыл бұрын
Thanks, got my first kit today which had no instructions(just like almost everything today) I'll be bookmarking this video in case I forget.
@curtainsup95 жыл бұрын
Thanks for this video. I had bought a "kit" of these extractors but didn't know how to use them. I have made a note based upon your instruction to tape into the lid of my "kit". That way if I ever need it, I will know how to use it as I won't trust my memory.
@quabledistocficklepo35977 жыл бұрын
Thanks for that. I have a ridiculously large collection of screw extractors, but none of them worked very well, and I had just about given up. Now, after seeing this video, I'm going to try again.
@JonathanWillis Жыл бұрын
Did it work, I've got 2 sets and side 2 (extractor) never works!
@muhammadmustafiz80407 жыл бұрын
thank you very much for this video. i was doing side 1 clockwise and didnt know why it was taking so long. intro was a tad long i felt.
@troydzuricsko73315 жыл бұрын
Have a Fisher and Paykel top loader gas dryer that was making a screeching noise due to a bad bearing. The M5 allen bolt on the inside of the drum was frozen and I ended up rounding it so that nothing would work to get it out. Went to Lowe's and bought a SpeedOut kit and ended up using the largest of the extractors and followed the instructions to the letter. Reamed it first with the drill in reverse to at least 1/16" of an inch into the bolt and then flipped the bit and used the extractor. The 1/2" drill I was using didn't have the power to turn the bolt (only to bite the bit into the bolt), so I clamped on a Vise-Grips locking pliers to the extractor bit and gave it a very slow, hard turn. And sure enough, I heard a snap and that bolt came loose. The extractor was into the bolt deep enough so that the heavy 1/2" drill I was using was literally hanging from it, but it didn't have the torque to do break the bolt. But, the SpeedOut did do the job. Consider me impressed with the tool. It may not work in all circumstances, but it is definitely something to have in the toolkit when all else fails. For $10 and a trip to Lowe's, it saved the day.
@BrianJonson4 жыл бұрын
I bought this and followed direction exactly and laughed when it did absolutely nothing. Not even close.
@gingko4me14 жыл бұрын
Me too...
@mrln044 жыл бұрын
Same. It's a piece of shit
@illcommunications4154 жыл бұрын
You have to use an impact driver otherwise you get nothing. Took me awhile to figure it out myself.
@rothweiler4 жыл бұрын
You need to drill pretty deep for the extractor to be able to grab. The "boogering" of the screw he did at the beginning was more of a exercise in doing the drilling that's needed. That part of his video made the process misleading at best.
@TheShoottheradio4 жыл бұрын
They is a better version of this tool that works. It's more like a backwards drill head that really snags the head of the bolt.
@jimquantic8 жыл бұрын
THAT was clear, well done and thank you
@theinformationmercenary92208 жыл бұрын
+Jmichael Isbell Thank you!
@Chris-pv2ht5 жыл бұрын
Great worked a treat on a screw in my double glazed door which was rounded off so I couldn't replace the Euro cylinder lock. Worked a treat
@lovingatlanta3 жыл бұрын
👍🙏Thank you sir! 💝 Thank you for helping all of us daddyless daughters out here. Daddy died before he could teach me about this stuff. It takes a village!! RIP daddy. 🙏🤗💞🤗
@user-xu8eb4hu5p6 жыл бұрын
Thanks for sharing this video. I will give it a try tomorrow. I just got a similar screw extractor and i hope it works because I have a big deck full of old screws to remove and I noticed some/most are hard to get them out. THANKS
@horacerumpole69126 жыл бұрын
1. There are two levels of quality for this product. 2. Not much of a test mainly because the screw was not under a tensile load.
@dajamz014 жыл бұрын
Worked for me to my surprise. Made few tries and insisted a bit and ended up removing the screws.
@Bonbonbon739 Жыл бұрын
Thanks man I just bought these and now I know how to correctly use them
@diegoghia12016 жыл бұрын
I got this a year ago, never use it, until yesterday, installing a toilet floor flange, messed up the head of one screw, bust out this tool, and it took 5 seconds to remove the broken screw! Should deff be in your kit ! 👍
@masterasia4175 Жыл бұрын
Im glad I looked this video up, I def would have had the drill in normal drive mode if you hadnt made that clear when using the first bit! thank you!
@TheHoboWithAShotgun Жыл бұрын
What is "reverse" the unscrewing mode?
@masterasia4175 Жыл бұрын
@@TheHoboWithAShotgun yep!
@slyeey52785 жыл бұрын
Thank you, very clear example of how to do this.
@lukadabuca6 жыл бұрын
Thanks man. I just removed a screw with the help of this vid.
@shawnsmith32885 жыл бұрын
My extractor had no instructions. Great video thanks.
@thepaulinator69343 жыл бұрын
Excellent demonstration! Thank you!
@charleswatson5746 жыл бұрын
1:22 short cut. Your welcome.
@illcommunications4154 жыл бұрын
Thank you, that intro was killing me
@sce3714 жыл бұрын
2:15
@bb-sf9hw4 жыл бұрын
Thank you Charles Watson!
@shadowghst77042 жыл бұрын
I had those hinge centering bits, and it worked like a dream!
@richardhifi3 жыл бұрын
I have one of these kits in my tool bag, cheap to buy and got me out of a couple of situations with damaged screws on jobs
@frankgonzalez6144 жыл бұрын
I got this tool and was afraid it didn't work at all after a few attempts but I finally drilled deep enough and it worked, y'all!
@yosyp59054 жыл бұрын
Nice. It worked so well that now I can't remove the screw from the extraction bit.
@18947ful7 жыл бұрын
tried the screw extractors on a screw that was givin me headaches for quite a time now. At first it did not work, but i honestly forgot to put it on reverse. Well then it came out within a second with the Side 1 ! so it works, even with smaller screws, mine barely fit the smallest extractor i had in my set.
@ThorForShort3 жыл бұрын
Sweet! these worked great!! Like the video says, I just had to make sure i was using the biggest size I could fit into the screw head
@VincentFink4 жыл бұрын
Thank you. Picking the size was a little confusing still for me but I got it. It worked for me but I tried the smallest bit first and it didn’t work so then I tried the second size and it worked!
@alpha1canismajoris3 жыл бұрын
I did the side 1 bit, but the side 2 refuses to grip, it just spins inside the hole. Am I doing something wrong?
@squirrelcovers63403 жыл бұрын
Try a different size.
@michaelxnightmare3 жыл бұрын
U should turn left side 1 and 2
@Brace673 жыл бұрын
@@michaelxnightmare Could you please clarify what you mean by "turn left side 1 and 2" I'm about to buy a broken screw extractor set to take on a project of trying to remove a metal screw with whats left of a Phillips screw head and with my luck I'll have the same experience as commenter Avnish Anand who said that side 2 would not grip. You replied to him to "turn left side 1 and 2" since he was having trouble but I don't know what you meant. Thanks.
@ManCaveGamingttv3 жыл бұрын
@@Brace67 I have the exact problem that you have.
@turbomac88593 жыл бұрын
He means have the drill on reverse when using the screw extractor bit, no matter which side you use.
@idoaricha3 жыл бұрын
i used your method on aliexpress screw extractor and IT'S WORKED!! thanks :)
@Richie3118 жыл бұрын
Is a 30 second intro really needed for a 3 min video?
@paulpaid8 жыл бұрын
lol...true though.
@kevinb20147 жыл бұрын
Exactly!
@massivepassive7 жыл бұрын
Seriously only needed to be about a 30 second video max
@AvetrusYT7 жыл бұрын
When the proper part of the video starts at... 1:25
@NguyenNguyen-rv9yw7 жыл бұрын
For mechanically incline, it should be 30 seconds. For novice like me, 3 min is exactly right.
@scottsmith22247 жыл бұрын
That worked on my Beretta M9. Thanks dude.
@AHollowVoiceSaysFool3 жыл бұрын
Great video. Almost didn't make it through the 30 second intro.
@1known24 жыл бұрын
Great gear, and a must have for your tool kit
@robertdouglas21777 жыл бұрын
it was very helpful, but I missed the part were I guess you had used a metal screw first to gage the hole size. Then again if that was info OR demonstration that was needed to be shown. Might as well did for me!
@mannyv2270 Жыл бұрын
Very simple and great explanation. Thanks.
@jamescc20106 жыл бұрын
I bought a 4-piece set from Homedepot and it worked great with little drilling first. The teeth caught screws very well and the drill bit still stuck to a screw after I unscrewed it out. It took like 1 or so minute to unscrew one screw.
@kaifan2092 жыл бұрын
Just tried today. It worked like a magic!
@justincredible35635 жыл бұрын
thks for ur vid,i just baught myself one of these and there was no instrucrion how to use it,so thx
@heathbarker30043 жыл бұрын
Just bought these guys and I'm gonna use these guys to get the bad guys out. Wish me luck guys, oh thanks to the guy in the video is the reason I bought these guys.
@gabrielrobinson22534 жыл бұрын
Love you man awesomely informative!!!!
@Calocarv2 жыл бұрын
I found that once you have used side 1 to smooth out the head, side 2 just spins around. You have to use side 2 of bit that is 1 size bigger , only then will the screw come out.
@travissmith74715 жыл бұрын
Thanks for taking the time to share...
@luisayala20757 жыл бұрын
Loved the intro and video subscribed
@daveschannel495 жыл бұрын
I have those but didn’t know which side to spin the drill😞this video is what helped me take that bolt out!! Thanks👍🏼
@AP-bo1if5 жыл бұрын
I was skeptical at first, but logically it made sense. I was working on the car with a stubborn and rounded out screw, picked up the craftsman screw extractor and took it out in less than a minute. totally worth it IMHO. it's possible in some scenarios it may not work, such as where you need to put significant amount of torque. just drill counterclockwise for both sides. make sure to get a good depth into the head of the screw before using the second part.
@nbanolfkid6 жыл бұрын
Thanks. Good job. I always wondered how that worked.
@Anduin-oy5ij3 жыл бұрын
You're my spirit animal.
@christy24433 жыл бұрын
I needed to know this for my project i couldn't complete because the screws were stripped and i didnt have enough money to get extractors or even knew how to use them at the time
@PARDS27 жыл бұрын
GREAT JOB!!!
@gragor118 жыл бұрын
I would have made some corny remark about Phillips head vs Robertson but those days are long gone now that Robertson has lost their patent and 'everyone' is making American Square Head screws w/ square sides vs the patented wedge shape. Anyways, long story short - all the screws are crap now, not Robertson, cheap materials and strip or twist off at the first provocation. Nice video, clear demonstration and pretty good sound quality even for this deaf old dog. Now that all my screws are screwed I'm going to have to get me some of these.
@franzkafka40465 жыл бұрын
FANTASTIC VIDEO!!!!!!!!!!! Explained and demonstrated it PERFECTLY. thank you so much. it came out right away following your steps. THE BEST DRILL OUT VIDEO ON KZfaq!!!!
@jamesgretsch48946 жыл бұрын
I have a Henry .22 Lever Action rifle. The screw holding in the rear site has this problem but it’s a really small screw. Are these extractors small enough for a very small screw?
@Trig2422 жыл бұрын
Thanks for the simple tutorial!
@naveedkhan75405 жыл бұрын
great video and simple explanation.
@michaelevans98312 жыл бұрын
Great video! Question: What can be done if the head of the crew has broken off. Will you use the same procedure or will there be an extra few steps. Please elaborate!
@IsaacMasseythe_best2 жыл бұрын
Hey, this is a 4 year old vid, but i'd follow the same procedure just making sure to not destroy the original threads / threaded insert
@Hello08153 жыл бұрын
2:31 that’s what she said!
@dmitrisivanov7 жыл бұрын
what can you say about quality of this extractors? should buy?
@8880Dingo7 жыл бұрын
hi woood that work on a steel screws on metal pool copping?
@justpar20128 жыл бұрын
Great video. The reverse statement was the key to using the extractor! Thanks!
@christopherdunn317 Жыл бұрын
That's great when you have a test with it set up like that, but in a real scenario this might not work LOL !
@thetoymaker94045 жыл бұрын
If the screw needs a lot pressure to unscrew with this tool its a game over .It is useful in a small amount of pressure
@TheSkyHive Жыл бұрын
AWESOME INFORMATION in this video! You earned my subscription! Keep them coming! Do you take requests?
@dinasohi7 жыл бұрын
I hate when people unlike this kind of video he works so hard to show you the way
@ryanborder1896 жыл бұрын
me too!
@rasimmehmedoski31296 жыл бұрын
Sohi
@bradfordltd6 жыл бұрын
Hooshang Sohi I find the video very helpful. Haters gona hate any ways. Keep on the great work.
@horacerumpole69126 жыл бұрын
Well don't cry about it snowflake-
@justincredible35635 жыл бұрын
thats bcuz they still dont know how to use it,hahahahahaha
@myscreen2urs5 жыл бұрын
I don't know what I'm doing wrong. I used side one multiple times, I used a drill bike to smooth out the burs and side 2 refuses to budge it.
@BrianJonson4 жыл бұрын
I agree. It didn't even come close to working for me
@illcommunications4154 жыл бұрын
You have to use an impact driver. A regular drill doesn't have enough torque.
@luggo76365 жыл бұрын
so where do you put the screw ?
@bruce00796 жыл бұрын
Very helpful. Thank you!
@tools2use9756 жыл бұрын
Your the man info man!
@kreynolds11235 жыл бұрын
Will this work on set screws?
@Cruz4746 жыл бұрын
this will work with an allen screw aswell right?
@mickeyjackson9318 Жыл бұрын
Best video out there
@helluvahick31856 жыл бұрын
will this set work for broken bolts?
@ReflectedMiles2 жыл бұрын
The basic air conditioner screw I am trying to get out totally outmatched the extractor bit. It could never get any kind of bite on the screw material. This method apparently depends on having used screws made of soft materials, which is not very useful or helpful if quality screws were used.
@simonezenobi52806 жыл бұрын
Sorry, what drill / electrical screwdriver do you recommend? An cheap Electrical screwdriver can do the job?
@reemara3 жыл бұрын
thank you.. it's really breaf and well informative 👏 👌
@mabi68195 жыл бұрын
Does this work with plastic screws as well?
@chumflex44963 жыл бұрын
Do these work for bolts as well? For say, I do repairs etc for a laundromat. And the guys who did it before me used a drill and stripped almost every bolt on the washer and dryers and there impossible to get out. Right now I’m using drill bits and popping the heads off than using vice grips too get the bolt out. And it takes a good 5-10 minutes alone just too get the head too pop and I’m looking for a better and faster alternative
@chrisc3383 жыл бұрын
Thank you so much, very helpful video.
@sulistiopurnomo85305 жыл бұрын
Work 100%, good job guys...
@animesh07345 жыл бұрын
can we use it with hand drill?
@cartalksmoneywalks2 жыл бұрын
What about trying to put a bolt INTO the item I’m using an Allen wrench and the hole is toast. I can’t drive the bolt in any further. Can I use this tool for continuing to insert the bolt??
@shine-cg9uf2 жыл бұрын
Would that work on a thumbscrew that snapped off n needs to b removed ? The part u would turn the cap I'll call it snapped off.