How to replaced the Stator Charging Coil on a John Deere Briggs and Stratton Engine V-twin Intek engine.
Пікірлер: 33
@defconklaxon2 ай бұрын
Fantastic video. Straight and to the point, has given me all the knowledge for what I need to do for my John Deere L120. I very much appreciate it, gonna help me out a TON getting my machine back up and running.
@WeekendHobbyMechanic2 ай бұрын
👍
@citdubreucq5127Ай бұрын
Great video. It was a huge help for me. I did not know the hammer trick. Thank you
@WeekendHobbyMechanicАй бұрын
Glad it helped
@chuckgilbert2035 Жыл бұрын
Good to know you can up the Phase of the stator. I did this on my Harley. Changed it to three phase. Going from 35 amp charging to 50 amps. Love to see how many amps the two wire stator puts out.
@wecanfixit730810 ай бұрын
great video! Trying to figure out a parts mower I bought, the previous owner had the flywheel off for some reason and it didn't sit all the way back down on the crankshaft.
@harvewaff22512 жыл бұрын
Excellent info. Thanks.
@frankmagnatta6750 Жыл бұрын
Where can i buy the fly wheel john deere 10:18 b 14:13 14:13 10:04 10:05 10:06
@nonofyabusiness47802 жыл бұрын
saw this after I tried to remove my flywheel. Ended you stripping my puller. ordered the briggs one will try that and a big hammer.
@WeekendHobbyMechanic2 жыл бұрын
👍
@nonofyabusiness47802 жыл бұрын
The Briggs remover took it off no problem. I was using a steering wheel puller like shown in other videos my steering wheel puller was from Harbor Freight maybe why it stripped.
@WeekendHobbyMechanic2 жыл бұрын
The Briggs puller is the best....
@galacticaone953711 ай бұрын
Use a torch and heat the flywheel/crank. If you have pressure on the puller will pop off.
@garrykrause23753 жыл бұрын
WOWW GOOD JOB..
@biggestthingyoueverdidsee7207 Жыл бұрын
Thank you!
@WeekendHobbyMechanic Жыл бұрын
You're welcome!
@nicholasmcspadden37932 жыл бұрын
The dang key is always the hardest to put in on the assembly line
@WeekendHobbyMechanic2 жыл бұрын
I agree to that..👍
@Sheeeeeeeeeeeeiiitt Жыл бұрын
Should I be able to see if the the key is sheered without having to pulling the flywheel? If not I have a a three claw crank puller. Would that be applicable for removing a flywheel on an 18hp twin opposed? Thanks
@WeekendHobbyMechanic Жыл бұрын
Yes, the keyways won’t lined up. You can try your three jaw puller but a pry bar and a hammer will do the trick.
@Sheeeeeeeeeeeeiiitt Жыл бұрын
@@WeekendHobbyMechanic Thanks so much for responding so quickly and thank for sharing great content.
@sebastianlucas46152 жыл бұрын
Where did you buy the extractor tool?
@WeekendHobbyMechanic2 жыл бұрын
It’s just a steering wheel pulled. Amazon.
@emmettwalker82683 жыл бұрын
What size is the nut on the flywheel I have to change my stator and I don't have the size I need what size is it
@WeekendHobbyMechanic3 жыл бұрын
32mm
@sueannsoto7299 Жыл бұрын
Jd la145 fan blades broke and chewed up flywheel. Is it worth fixing???
@WeekendHobbyMechanic Жыл бұрын
Plastic fan broke? You need to find a good used part. Do a search on Facebook marketplace, Craig’s list or Kijiji for a guy like me that has used parts.
@mrnhl3080 Жыл бұрын
I couldn’t get the nut off the flywheel even using a breaker bar. The other issue is trying to unscrew it but the flywheel wants to spin.
@WeekendHobbyMechanic Жыл бұрын
Somehow you have to use a large screwdriver and jam it in the flywheel gear. Or borrow a impact gun.
@cuznicksaidso6 ай бұрын
Just throw some nuts and bolts in engine cylinder. It'll stop spinning. Lol. Don't really do this. I've used ratchet straps/belts, rope, etc around the flywheel and find a place to hook it to to keep from coming off.
@nicholasmcspadden37932 жыл бұрын
508 flywheel, fun
@nicholasmcspadden37932 жыл бұрын
Newer models take bigger side armatures (coil packs)