No video
How to Remove a Jeep Wrangler JL Stock Rear Bumper: A Step by Step Guide
Рет қаралды 57,902
Күн бұрынFishbone Offroad presents a quick tutorial on how to remove your Jeep JL's OEM rear bumper. Quick, simple, and to the point!
Shop for our JL rear bumpers at FishboneOffroad.com
@creade3783 Жыл бұрын
Just got a 2022 Rubicon and needed to loosen the rear bumper to install a tow receiver hitch. Your video is much more help and updated compared to others. Thank you
@ADCC-qp2gk 3 жыл бұрын
Thanks fishbone was able to watch this and do away with my old faded bumper.
@jakebittner7725 8 ай бұрын
On my ‘24 the 4x 16mm “rear facing bolts” shown in the video are nuts on bolts with ~2” extension. You cant fit a regular socket over the bolt and an extension socket cant fit between the body and the top bolt. Some bloody knuckles and ratcheting box wrench required.
@hojalateriaypinturanewjers9998 3 ай бұрын
Thank you. very helpful.
@jimwright8651 4 жыл бұрын
Thank you for posting this, it was very helpful.
@FishboneOffroad 4 жыл бұрын
Jim we are glad it helped you!
@alexg8460 11 ай бұрын
Nice and easy thanks!
@theadorefischer9149 3 жыл бұрын
Thanks for sharing
@FishboneOffroad 3 жыл бұрын
Thanks for watching!
@Yuyu93Salmi 3 жыл бұрын
Awesome, thanks for the informative video
@sandramiller8774 3 жыл бұрын
On my JL the wiring is secured with those plastic screws all along the length of the bumper... taking them off was awful!
@malachii2 3 жыл бұрын
Why would you have to? Leave it secured to the old bumper except at the harness part. (unless of course you needed it for a different application)
@guarnibl 2 жыл бұрын
clip removal tool to get it started... needle nose pliers to finish. this seemed to be the trick to both remove and keep the christmas tree screws (with the attached zip tie thing) from breaking.
@ryangutierrez1837 Жыл бұрын
Will this work on a 2018 Jeep Wrangler Unlimited Sahara?
@FishboneOffroad Жыл бұрын
Yeah it's all the same
@ryangutierrez1837 Жыл бұрын
@@FishboneOffroad thanks, it worked!
@roguestatus4232 Жыл бұрын
what power tool are you guys using in the video?
@FishboneOffroad Жыл бұрын
It was a Porter Cable Impact Gun. Now we use Milwaukee tools
@RTM459 4 жыл бұрын
Other side is a 21 mm
@davidriggins1591 3 жыл бұрын
Anybody do a work around for park sensors?
@FishboneOffroad 3 жыл бұрын
Take a look at our instruction sheet over on our website. There may be some helpful information: www.fishboneoffroad.com/products/pc/viewPrd.asp?idproduct=2155&idcategory=89
Fishbone Offroad
Рет қаралды 64 М.
Fishbone Offroad
Рет қаралды 38 М.
Danny Johnson’s Garage
Рет қаралды 26 М.