How To Remove an Exterior Door

Рет қаралды 443,712

10 жыл бұрын

If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Shannon from www.house-improvements.com shows you how to remove a typical exterior door from a house. Video © 2014 SKS Media.
Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada.

Пікірлер: 112

@kayakdream 2 жыл бұрын

My favorite part was when you took the extra time to rehang the curtain. Thank you so much for this!!!

@rustymaximus9179 Жыл бұрын

Dude, I was literally just about to get started on a double doorframe removal and thought I'd check here for a video. I was planning to pry the thing out with a pry bar all the way around. I still had to do plenty of prying with outside and inside trim, but man you saved me so much grief!

@devastatn 5 жыл бұрын

Very nicely done. It's been two decades since I've done any type of home improvement chores. Just bought a house and I need to do exactly what you've just shown. I'm reusing everything that I can. Thank you for this video.

@rusavolk 4 жыл бұрын

Very useful for the all home DIYers like myself. Thank you for making this video.

@lexconor8498 5 жыл бұрын

Your time edits are perfect...all of what we need, none of what we don't (e.g. cutting the caulking). It's very helpful for some learners (like myself!) to actually watch you do each step for even 20 seconds to get a feel for it, then it's onto the next step. Keep 'em comin', Shannon!

@stockhunters 9 ай бұрын

Love about the part you talked about removing brick molding from stucco. I watched many similar videos looking for such advice. Thank you!

@dwaynenero535 5 жыл бұрын

Thank you Shannon for your very informative and clear videos. I'm a DIY-er who has done quite a bit of work to my own house and because I finished everything I'm moving onto helping others. I learn something new with every project and they almost always come with a challenge along the way but I get through it and discovering your channel or videos has been a great help. I'm about to install a pre-hung exterior door on a small garage and in a couple of weeks install the full garage door. I of course saw you video on that and it will prove to be helpful. Sorry for the long message, but Thank you, I really appreciate you and your skill.

@cwnemeth 3 жыл бұрын

I am removing a door at the back of my garage and this really helped!, I really appreciated the suggestion about removing the frame when not saving it!

@alafrosty 5 жыл бұрын

Dear Shannon: All your videos are so terrific! Between the narration, the content, the editing and your occasional humour, I really enjoy them all!

@HouseImprovements 5 жыл бұрын

Thank you.

@meagainandagain5756 2 жыл бұрын

Always intelligently presented.

@georgespragg9372 2 жыл бұрын

Been watching all of you videos, they are to the point and thorough. Thanks for making them.

@razijun5272 7 жыл бұрын

Great and eloquent explanation, good camera work, and wonderful teaching.

@robertcoleman2029 8 жыл бұрын

First rate video. I appreciated the attention to detail both in the work being done, as well as suggesting approaches not applicable to the video itself but that a DIY'er might encounter. It's nice to see someone who takes the time to describe all of the caveats. Thanks Shannon.

@shan1538 3 жыл бұрын

He spoke very pleasant slowly clear to understand and not yelling at you

@paulp8937 2 жыл бұрын

Very helpful Shannon, we're looking at putting in a new door and frame set and of course need to get the old one out and am having trouble getting anybody to schedule a time and date to come out, so it's looking more and more like a DIY project for us.

@micheled6111 8 жыл бұрын

Love your videos. My daughter and I are doing our first Reno entirely by KZfaq videos. Thank you!!!

@HouseImprovements 8 жыл бұрын

good luck. check out my forum if you have questions.www.house-improvements.com/forums/

@keithnoneya 4 жыл бұрын

Good Job. I've never done an exterior door. I was sure it wouldn't be hard but there's always something new you can learn. I'm glad I watched because I would have forgotten about my house alarm wiring on the top. The other thing I did was remove the excess sheet rock that hangs out. I just used my sheet rock hole saw and pushed in only, as I cut. I did this just in case I snagged it with the saw or the new door frame when I was installing it. If I snagged it, it could crack further into the wall, turning one job into three. The Door, Sheet rock repair and a paint job. Thanks for sharing. Best Wishes & Blessings. Keith Noneya

@crammia 6 жыл бұрын

Thank you for the clear and helpful directions - doing this today!

@llcoolj20 9 жыл бұрын

wow!! great video, best i've ever seem on how to do something. you really helped.

@image969 10 жыл бұрын

Awesome. Thanks.. Swapping my front door soon.

@PDSVIDEO1966 10 жыл бұрын

Nice set of videos,looking forward to seeing the finished house,thanks for taking the time to make them

@landonrenfro4918 7 жыл бұрын

Thank you for this video. This gave me a little more confidence to do the job.

@claytonlogan4240 2 жыл бұрын

I'm only few min into this video and I want to thank you for your contribution. Great information great video. Thank you

@HouseImprovements 2 жыл бұрын

Glad you enjoyed it!

@eduardoespinoza3411 10 жыл бұрын

Great instructional video. Seems just backing the screws from hinges would work in the event you want to install another frame/door set.

@kevinneal6612 2 жыл бұрын

Great tutorial, starting my door removal right now. Thanks

@user22162 5 жыл бұрын

As usually very helpful video. Thank you!

@michaelerbreviews 5 жыл бұрын

Nice work. Great explanations as you went along.

@doreenbiggs6703 Ай бұрын

Great video

@BobTheSchipperke 2 жыл бұрын

Next to do on my list! Thank you Shannon!

@lonewolf1461 3 жыл бұрын

Another awesome video from HouseImprovements, thank you again Shannon.

@HouseImprovements 3 жыл бұрын

Thanks again!

@AlexanderRodriguez-ni4kt 8 жыл бұрын

thank you for the stucco tip.

@tonym6920 6 жыл бұрын

Great video! Very well done, thanks!

@user-mj4bz4bq1q 15 күн бұрын

Thank you

@robviolin1 8 жыл бұрын

Very helpful, thanks.

@joeythechamp 3 жыл бұрын

All your videos are awesome I really appreciate you taking the time to teach

@HouseImprovements 3 жыл бұрын

My pleasure!

@samjuan3440 4 жыл бұрын

Just what i was looking for

@donbain4425 6 жыл бұрын

Helpful thank you .

@Fischerboy2008 7 жыл бұрын

very nicely done.

@tlr4974 Жыл бұрын

Sir, thank you so much!

@wa4aos 10 жыл бұрын

Very helpful. THANKS!!

@Mr.Turano 7 жыл бұрын

Thank you.

@Toastisme 5 жыл бұрын

Another great video.

@waterlilyroot 9 жыл бұрын

Thank you! Doing some reno's on my own here...and I am very amateur...lol....but this really helps :)

@1800KLIENFELD 2 жыл бұрын

Dude thank you!!!!!!!!!!!

@patcornwell9298 2 жыл бұрын

Well done

@Jello-Biafra69 10 жыл бұрын

Fantastic. I love KZfaq.

@mikekepner797 5 жыл бұрын

Thanks for the detailed instructions. Getting ready to replace my back door so this was very helpful.

@kevinhughes7848 8 жыл бұрын

Thank you very much! In a remodel and door extrication extremely helpful. Will also check the install video. Kevin

@HouseImprovements 8 жыл бұрын

+Kevin Hughes thanks

@jahahalhahah9114 10 жыл бұрын

great video

@flyingtigre1 10 жыл бұрын

nice camera work. lucky man.

@johnham7422 4 жыл бұрын

Great video!

@antoncurnow8224 7 жыл бұрын

Very useful video Shannon. Would removal of timber frame double hung or casement windows for re-use be much the same procedure? Thanks mate!

@edris.alkozi 6 жыл бұрын

awesome,

@daflomeli 8 жыл бұрын

Do you have video of how to expand an exterior door way. I'm trying to expand an adobe doorway. If you have any information on how to proceed. I would greatly appriciated. All your videos have been a great assest to me and my homebuilding project. Thanks you for that. Adios.

@JacobZamarripa 10 жыл бұрын

Great video, always easy to follow and always what I need. Would you happen to have a link to the video where you cover the door entry up? I want to eliminate the opening. Thank you.

@HouseImprovements 10 жыл бұрын

Please subscribe to the channel and you will be notified when new videos come available. The one you are looking for comes on line to view later this week.

@JenTheCanadianHen 2 жыл бұрын

Did you say reciprocating saw?💕 I can do this. Thanks!

@andrewssd 2 жыл бұрын

I will suggest removing the exterior trim first before you cut the nails for the door jamb to give you prying support

@brianstokes562 6 жыл бұрын

Great instructions and tools needed really educational I appreciate it thank you

@bobbig4078 7 жыл бұрын

good video Shannon

@HouseImprovements 7 жыл бұрын

Thanks Bob

@EPFForsyth 4 жыл бұрын

Hello from El Paso, TX. I am going to try to replace my front door and install a storm door. Can you give me a list of tools and equipment needed to accomplish this DIY task.

@staceytaylor9074 2 жыл бұрын

thank you have watched quite a few of ur videos and they helping alot however my wife wants me to convert are exterior door to a bay window what do i need to do differently or is it basicaly same steps also watcher your framing one too just need a littkle help

@HouseImprovements 2 жыл бұрын

Order the bay unit to fit and you should be ok.

@blondeexplorer8276 2 жыл бұрын

I need to remove an exterior door. The door opens inward. The door is locked. The door is blocked on the inside by a dolly loaded with wood. Any suggestions? The electric garage door opener got hit by lightning surge and now we can not open the RV garage "DOOR"/this side door is the only way in but it has problems listed.

@juanfolgarcolomer2573 3 жыл бұрын

Very illustrative video! Sorry if this question sounds silly but I'm just wondering if could be any issue when removing the old door lining.. structural wise, collapse..? Thanks, Juan

@HouseImprovements 3 жыл бұрын

The door should not be what is holding up your home if it was framed properly .

@King-Gilgamesh 10 ай бұрын

I have a question please ..... 36 From frame to frame 36 in .....Because the measurement of the door 35.75 inches....What do you think

@nrfa6229 8 жыл бұрын

Does your blade have a double edge so you can cut either way? Didn't know that they have those. Always great videos Shannon. I need to replace the side door to my barn on new house I recently bought. The bottom has rotted out. Any suggestions or ides? Thanks again. Todd.

@HouseImprovements 8 жыл бұрын

+Nrfa My recip saw blade is not double sided but you can put it into the saw either direction.

@Tronix102 9 жыл бұрын

Would this process be used to replace one side of a door frame on a light side door? The lock holes in my door are drilled wrong and need to be re-drilled, I am thinking the door frame needs to be replaced and then re-drill the holes for the lock. Thoughts?

@HouseImprovements 9 жыл бұрын

Yes you could .

@ENFPerspectives Жыл бұрын

Very comprehensive except for lead information 11:09 (possible toxic inhalation); looks like older siding.

@RSole9999 4 жыл бұрын

The doorbell problem may have been a worn-out push-button or transformer burned out. Now we'll never know since the wire was cut with the recip saw and probably too short to easily salvage

@debianation Жыл бұрын

How about a 3 section door removal?

@Maxid1 10 жыл бұрын

How cold was it outside when you did this? The air lock (orange tarp) is a nice way to work comfortably, and I imagine a good way to conceal the location of the house you're working on.

@HouseImprovements 10 жыл бұрын

It was not to bad about -15C ,but of course the wind was cold, so the tarps held in a bit of warmth and kept the neighbours out of the video. LOL

@Maxid1 10 жыл бұрын

That's still pretty cold. Yeah, if those neighbors want to be on youtube, let them get their own channel!

@ckn2858 5 жыл бұрын

hello Shannon, I watch most of your video because I want to have knowledge to solve my Patio having Transom 62.5 X 92.5 eventhu I can not do the work. ::)) I have a Patio Door (HDepot in USA call as Exterior Door as it connect to the Deck on the Second Floor). The door has one "fix" and one "open" (left open). There is a leak and the Maple Woodfloor (interior) was damaged. The door is in perfect condition and it is costly to replace the new one. I would like to have the Aluminium Threshold/Sill replaced but having Composite instead of Treated Wood. The Middle piece of the "Fix" and "Open" Door (I guess is called Mullion) sit on the Threshold. In order to replace the Threshold and part of the damaged Maple Woodfloor and reinvestigate the Joist of the Deck, the Patio door need to be removed and re-installed. I pay someone to deal w/ the issues for labor and I would pay for Materials. I already buy Vycor 0.025 in. x 9 in. x 75 ft. Deck Protector and try to buy the Threshold w/ composite. I would like to change the ORIGINAL wood frame w/ something that will NOT rot in the long run... it is possible?. Please provide suggestion and recommendation. Thx

@frugalsolutions 4 жыл бұрын

When you install a new exterior door should the jam be flush with the rough opening (wall stud) i.e. is the jam supposed to extend over the drywall and stucco or is it supposed to be flush with the stud on both sides? I am trying to figure out how to order a door for new construction and need the jam size

@HouseImprovements 4 жыл бұрын

The two jamb sizes without custom ordering or adding on to them is 4-1/2" and 6-1/2". The jamb extends from flush to outside face of wall plywood to inside face of drywall. So a home with 2x4 walls ,1/2" exterior plywood and 1/2" drywall would be 4-1/2". You have some room to play with that, sometimes homes have 3/8 plywood and or 3/8 drywall so the standard sizes will work there also.

@frugalsolutions 4 жыл бұрын

@@HouseImprovements Does it make sense that I need to order a 5 3/4 jam since I have 1/2 drywall and measured the stud to be 5 1/4? the plaster guy told me to do the jam flush with the stud. Everyone at the two hardware stores look at me like I am crazy, telling me I need to account for stucco and the measurements should be 1/2"(drywall) + 5 1/2"(they say all 2 x 6's are 5 1/2) + 7/8"(drywall) = 6 7/8

@RickScherfDrywall 10 жыл бұрын

Great vid Shannon. You mentioned watching out for a doorbell wire, what voltage are those usually?

@HouseImprovements 10 жыл бұрын

They should only be 12V so no real danger but you don't want to cut it if your keeping it. LOL

@singlaerryfam3626 9 жыл бұрын

Can u change only one side of the frame or you have to change the whole thing?

@HouseImprovements 9 жыл бұрын

You could change out one side ,say because of a break-in or something that damaged the striker side. to do that though you will still need to remove the whole frame.

@luisislas6811 9 жыл бұрын

The hole frame

@brian-seanshepherd8778 10 жыл бұрын

Once I get my red-seal from 27 union I'd love to work a job with you, my fellow Canadian

@HouseImprovements 10 жыл бұрын

Good luck with your red- seal !

@fanciscoroberio3391 11 ай бұрын

how do i remove this door model 0:36

@celewign 3 жыл бұрын

Is that a hive tool he’s using to remove the pins?

@HouseImprovements 3 жыл бұрын

Yes.

@rafeon1ry 8 жыл бұрын

40 years of dust lmao😂

@dfhhtyu3434 2 жыл бұрын

Canadian aye

@ivanbehnam7822 8 жыл бұрын

hi shannon this ivan you do hardwood floor

@HouseImprovements 8 жыл бұрын

+Ivan Behnam Yes, here is my flooring playlist. kzfaq.info/sun/PLh0KqGKtX4oVUwKr0copJax0ej9mUAq3K

@Da-veed 9 жыл бұрын

Shannon what's going on brotha. How many years did it take to learn everything you know?

@HouseImprovements 9 жыл бұрын

its been a life long journey! And still learning.

@Da-veed 9 жыл бұрын

HouseImprovements That's great, I'm 18 and learning as well. I say for a young man I know a lot. Hopefully in 10 years I know as much as you haha. Another question, are all your tools pretty quiet or do you edit the video? I was using a miter saw yesterday, and it was loud. I HATE NOISE!

@Mcnutts3 8 жыл бұрын

+David Santos all tools make about the same amount of noise, relative to tool and competition. the more you spend often equals less noise.... always use ear and eye protection

@Da-veed 8 жыл бұрын

Mcnutts3 ah man this was a few months ago, I have a lotttt more knowledge now lol but thanks anyways.

@Mcnutts3 8 жыл бұрын

David Santos right on man stick with it , it will make you money, pay attention to the little tricks the senior guys do, learn lots and makes things easy

@THE1X21X 9 жыл бұрын

Is that an estwing hammer I see??

@vanhalkr Ай бұрын

I think you are a liar. how can you puill out the pins so easily ? I'm trying to pull out the below pin from so small space for a day, but not done yet. you are like a actor. hahaha

@HouseImprovements Ай бұрын

Some are pretty sticky, if its that bad just remove all the screws and take the hinge right off.